[U-Boot] [PATCH v2 03/11] sunxi: Use MFD_SUN6I_PRCM if used

[Jagan Teki]

MFD_SUN6I_PRCM is also used for SUN8I and SUN9I, so
select the same on respective MACH types.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 arch/arm/mach-sunxi/Kconfig  | 2 ++
 arch/arm/mach-sunxi/Makefile | 2 --
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 319bee1..cf999ab 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -182,6 +182,7 @@ config MACH_SUN8I_V3S
 config MACH_SUN9I
 	bool "sun9i (Allwinner A80)"
 	select CPU_V7
+	select MFD_SUN6I_PRCM
 	select SUNXI_HIGH_SRAM
 	select SUNXI_GEN_SUN6I
 	select SUPPORT_SPL
@@ -212,6 +213,7 @@ endchoice
 # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
 config MACH_SUN8I
 	bool
+	select MFD_SUN6I_PRCM
 	default y if MACH_SUN8I_A23
 	default y if MACH_SUN8I_A33
 	default y if MACH_SUN8I_A83T
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 22e73d7..a6721ad 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -18,8 +18,6 @@ obj-y	+= usb_phy.o
 endif
 obj-$(CONFIG_I2C_SUN6I_P2WI)	+= p2wi.o
 obj-$(CONFIG_MFD_SUN6I_PRCM)	+= prcm.o
-obj-$(CONFIG_MACH_SUN8I)	+= prcm.o
-obj-$(CONFIG_MACH_SUN9I)	+= prcm.o
 obj-$(CONFIG_MACH_SUN8I)	+= rsb.o
 obj-$(CONFIG_MACH_SUN9I)	+= rsb.o
 obj-$(CONFIG_MACH_SUN4I)	+= clock_sun4i.o
-- 
2.7.4