[U-Boot] EXT: [PATCH v1 1/5] bootcount: config: Make the SYS_BOOTCOUNT_ADDR available also for non EXT setups

[Ray, Ian (GE Healthcare)]

> On 10 Feb 2018, at 12.20, Lukasz Majewski <lukma at denx.de> wrote:
> 
> This commit gives the opportunity to reuse the CONFIG_SYS_BOOTCOUNT_ADDR
> Kconfig entry also for boards, which do not use EXT as a storage for
> bootcount (i.e. on flash ones).
> 
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
> 

Reviewed-by: Ian Ray <ian.ray at ge.com>


> ---
> 
> drivers/bootcount/Kconfig | 13 ++++++-------
> 1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
> index d82289f57b..1254bb51ca 100644
> --- a/drivers/bootcount/Kconfig
> +++ b/drivers/bootcount/Kconfig
> @@ -31,6 +31,12 @@ config BOOTCOUNT_EXT
> 	  Add support for maintaining boot count in a file on an EXT
> 	  filesystem.
> 
> +config SYS_BOOTCOUNT_ADDR
> +	hex "RAM address used for reading and writing the boot counter"
> +	default 0x7000A000
> +	help
> +	  Set the address used for reading and writing the boot counter.
> +
> if BOOTCOUNT_EXT
> 
> config SYS_BOOTCOUNT_EXT_INTERFACE
> @@ -56,13 +62,6 @@ config SYS_BOOTCOUNT_EXT_NAME
> 	help
> 	  Set the filename and path of the file used to store the boot counter.
> 
> -config SYS_BOOTCOUNT_ADDR
> -	hex "RAM address used for reading and writing the boot counter"
> -	default 0x7000A000
> -	depends on BOOTCOUNT_EXT
> -	help
> -	  Set the address used for reading and writing the boot counter.
> -
> endif
> 
> endif
> -- 
> 2.11.0
>