[U-Boot] [UBOOT PATCH 2/2] spi: Added Kconfig support for SYS_ZYNQ_SPI_WAIT and XILINX_SPI_IDLE_VAL

[Vipul Kumar]

This patch added Kconfig support for CONFIG_SYS_ZYNQ_SPI_WAIT
and CONFIG_XILINX_SPI_IDLE_VAL and set default value.

Signed-off-by: Vipul Kumar <vipulk at xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
---
 drivers/spi/Kconfig      | 12 ++++++++++++
 drivers/spi/xilinx_spi.c |  4 ----
 drivers/spi/zynq_spi.c   |  3 ---
 3 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 436e9ad..bcb28cf 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -210,6 +210,18 @@ config SYS_ZYNQ_QSPI_WAIT
        help
          Define default Zynq QSPI wait time in milliseconds.

+config SYS_ZYNQ_SPI_WAIT
+       int "Define Zynq SPI wait time in ms"
+       default 10
+       help
+         Define default Zynq SPI wait time in milliseconds.
+
+config XILINX_SPI_IDLE_VAL
+       hex "Define the default SPI idle value"
+       default 0xFFFFFFFF
+       help
+         Set the default SPI idle value.
+
 endif # if DM_SPI

 config SOFT_SPI
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index a951a77..9781ea9 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -74,10 +74,6 @@
                                SPICR_SPE)
 #define XILSPI_SPICR_DFLT_OFF  (SPICR_MASTER_INHIBIT | SPICR_MANUAL_SS)

-#ifndef CONFIG_XILINX_SPI_IDLE_VAL
-#define CONFIG_XILINX_SPI_IDLE_VAL     GENMASK(7, 0)
-#endif
-
 #ifndef CONFIG_SYS_XILINX_SPI_LIST
 #define CONFIG_SYS_XILINX_SPI_LIST     { CONFIG_SYS_SPI_BASE }
 #endif
diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c
index ed2b8cb..be8f525 100644
--- a/drivers/spi/zynq_spi.c
+++ b/drivers/spi/zynq_spi.c
@@ -33,9 +33,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define ZYNQ_SPI_CR_SS_SHIFT           10      /* Slave select shift */

 #define ZYNQ_SPI_FIFO_DEPTH            128
-#ifndef CONFIG_SYS_ZYNQ_SPI_WAIT
-#define CONFIG_SYS_ZYNQ_SPI_WAIT       (CONFIG_SYS_HZ/100)     /* 10 ms */
-#endif

 /* zynq spi register set */
 struct zynq_spi_regs {
--
2.7.4

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.