[U-Boot] [PATCH v2 7/7] net: sun8i-emac: remove support for old binding
Andre Przywara
andre.przywara at arm.com
Fri Feb 9 01:30:09 UTC 2018
The original DT binding used by U-Boot's sun8i-emac driver was not really
agreed upon, and deviated from the "official" binding now used by the
kernel. Since now all U-Boot users have been converted to the new
binding, we can remove support for the old DT nodes from the driver.
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
drivers/net/sun8i_emac.c | 78 ++++++++++++++++--------------------------------
1 file changed, 26 insertions(+), 52 deletions(-)
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index 4ba8959239..fd13b6bf95 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -456,7 +456,7 @@ static int parse_phy_pins(struct udevice *dev)
{
int offset;
const char *pin_name;
- int drive, pull, i;
+ int drive, pull = SUN4I_PINCTRL_NO_PULL, i;
offset = fdtdec_lookup_phandle(gd->fdt_blob, dev_of_offset(dev),
"pinctrl-0");
@@ -476,31 +476,20 @@ static int parse_phy_pins(struct udevice *dev)
drive = SUN4I_PINCTRL_30_MA;
else
drive = SUN4I_PINCTRL_40_MA;
- } else {
- drive = fdt_getprop_u32_default_node(gd->fdt_blob, offset, 0,
- "allwinner,drive", 4);
}
if (fdt_get_property(gd->fdt_blob, offset, "bias-pull-up", NULL))
pull = SUN4I_PINCTRL_PULL_UP;
- else if (fdt_get_property(gd->fdt_blob, offset, "bias-disable", NULL))
- pull = SUN4I_PINCTRL_NO_PULL;
else if (fdt_get_property(gd->fdt_blob, offset, "bias-pull-down", NULL))
pull = SUN4I_PINCTRL_PULL_DOWN;
- else
- pull = fdt_getprop_u32_default_node(gd->fdt_blob, offset, 0,
- "allwinner,pull", 0);
+
for (i = 0; ; i++) {
int pin;
pin_name = fdt_stringlist_get(gd->fdt_blob, offset,
- "allwinner,pins", i, NULL);
- if (!pin_name) {
- pin_name = fdt_stringlist_get(gd->fdt_blob, offset,
- "pins", i, NULL);
- if (!pin_name)
- break;
- }
+ "pins", i, NULL);
+ if (!pin_name)
+ break;
pin = sunxi_name_to_gpio(pin_name);
if (pin < 0)
@@ -798,6 +787,7 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
struct eth_pdata *pdata = &sun8i_pdata->eth_pdata;
struct emac_eth_dev *priv = dev_get_priv(dev);
const char *phy_mode;
+ const fdt32_t *reg;
int node = dev_of_offset(dev);
int offset = 0;
#ifdef CONFIG_DM_GPIO
@@ -805,33 +795,25 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
int ret = 0;
#endif
- pdata->iobase = devfdt_get_addr_name(dev, "emac");
- if (pdata->iobase == FDT_ADDR_T_NONE)
- pdata->iobase = devfdt_get_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
if (pdata->iobase == FDT_ADDR_T_NONE) {
debug("%s: Cannot find MAC base address\n", __func__);
return -EINVAL;
}
- priv->sysctl_reg = devfdt_get_addr_name(dev, "syscon");
- if (priv->sysctl_reg == FDT_ADDR_T_NONE) {
- const fdt32_t *reg;
-
- offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon");
- if (offset < 0) {
- debug("%s: cannot find syscon node\n", __func__);
- return -EINVAL;
- }
- reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL);
- if (!reg) {
- debug("%s: cannot find reg property in syscon node\n",
- __func__);
- return -EINVAL;
- }
- priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob,
- offset, reg);
- } else
- priv->sysctl_reg -= 0x30;
+ offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon");
+ if (offset < 0) {
+ debug("%s: cannot find syscon node\n", __func__);
+ return -EINVAL;
+ }
+ reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL);
+ if (!reg) {
+ debug("%s: cannot find reg property in syscon node\n",
+ __func__);
+ return -EINVAL;
+ }
+ priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob,
+ offset, reg);
if (priv->sysctl_reg == FDT_ADDR_T_NONE) {
debug("%s: Cannot find syscon base address\n", __func__);
return -EINVAL;
@@ -841,10 +823,7 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
priv->phyaddr = -1;
priv->use_internal_phy = false;
- offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "phy");
- if (offset < 0)
- offset = fdtdec_lookup_phandle(gd->fdt_blob, node,
- "phy-handle");
+ offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "phy-handle");
if (offset < 0) {
debug("%s: Cannot find PHY address\n", __func__);
return -EINVAL;
@@ -871,17 +850,12 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
}
if (priv->variant == H3_EMAC) {
- if (fdt_getprop(gd->fdt_blob, node,
- "allwinner,use-internal-phy", NULL))
- priv->use_internal_phy = true;
- else {
- int parent = fdt_parent_offset(gd->fdt_blob, offset);
+ int parent = fdt_parent_offset(gd->fdt_blob, offset);
- if (parent >= 0 &&
- !fdt_node_check_compatible(gd->fdt_blob, parent,
- "allwinner,sun8i-h3-mdio-internal"))
- priv->use_internal_phy = true;
- }
+ if (parent >= 0 &&
+ !fdt_node_check_compatible(gd->fdt_blob, parent,
+ "allwinner,sun8i-h3-mdio-internal"))
+ priv->use_internal_phy = true;
}
priv->interface = pdata->phy_interface;
--
2.14.1
More information about the U-Boot
mailing list