[U-Boot] [PATCH 04/11] sunxi: Add SUNXI_RSB kconfig entry
Jagan Teki
jagannadh.teki at gmail.com
Tue Feb 6 15:15:21 UTC 2018
Add simple and meaningful kconfig option for rsb.c
instead of using MACH type on Makefile.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 10 ++++++++++
arch/arm/mach-sunxi/Makefile | 3 +--
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index cf999ab..7ab1990 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -23,6 +23,14 @@ config MFD_SUN6I_PRCM
Support for the PRCM (Power/Reset/Clock Management) unit available
in A31 SoC.
+config SUNXI_RSB
+ bool "Allwinner sunXi Reduced Serial Bus Driver"
+ help
+ Say y here to enable support for Allwinner's Reduced Serial Bus
+ (RSB) support. This controller is responsible for communicating
+ with various RSB based devices, such as AXP223, AXP8XX PMICs,
+ and AC100/AC200 ICs.
+
config SUNXI_HIGH_SRAM
bool
default n
@@ -185,6 +193,7 @@ config MACH_SUN9I
select MFD_SUN6I_PRCM
select SUNXI_HIGH_SRAM
select SUNXI_GEN_SUN6I
+ select SUNXI_RSB
select SUPPORT_SPL
config MACH_SUN50I
@@ -213,6 +222,7 @@ endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
config MACH_SUN8I
bool
+ select SUNXI_RSB
select MFD_SUN6I_PRCM
default y if MACH_SUN8I_A23
default y if MACH_SUN8I_A33
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index a6721ad..8f30979 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -18,8 +18,7 @@ obj-y += usb_phy.o
endif
obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o
obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o
-obj-$(CONFIG_MACH_SUN8I) += rsb.o
-obj-$(CONFIG_MACH_SUN9I) += rsb.o
+obj-$(CONFIG_SUNXI_RSB) += rsb.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o
--
2.7.4
More information about the U-Boot
mailing list