[U-Boot] [PATCH v2 07/13] board: freescale: ls1012afrdm: enable network support on ls1012afrdm

Calvin Johnson calvin.johnson at nxp.com
Thu Feb 15 14:17:14 UTC 2018


This patch enables ethernet support for ls1012afrdm.

Signed-off-by: Calvin Johnson <calvin.johnson at nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi at nxp.com>
---
Changes in v2:
-split from original patch "board: freescale: ls1012a: enable network
support on ls1012a platforms"
---
 board/freescale/ls1012afrdm/Kconfig       |  14 ++++
 board/freescale/ls1012afrdm/Makefile      |   1 +
 board/freescale/ls1012afrdm/eth.c         | 122 ++++++++++++++++++++++++++++++
 board/freescale/ls1012afrdm/ls1012afrdm.c |   5 --
 4 files changed, 137 insertions(+), 5 deletions(-)
 create mode 100644 board/freescale/ls1012afrdm/eth.c

diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig
index 38bd91b..ad6666b 100644
--- a/board/freescale/ls1012afrdm/Kconfig
+++ b/board/freescale/ls1012afrdm/Kconfig
@@ -12,6 +12,20 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1012afrdm"
 
+if FSL_PFE
+config SYS_LS_PFE_FW_ADDR
+	hex "Flash address of PFE firmware"
+	default 0x40a00000
+
+config DDR_PFE_PHYS_BASEADDR
+	hex "PFE DDR physical base address"
+	default 0x03800000
+
+config DDR_PFE_BASEADDR
+	hex "PFE DDR base address"
+	default 0x83800000
+endif
+
 source "board/freescale/common/Kconfig"
 
 endif
diff --git a/board/freescale/ls1012afrdm/Makefile b/board/freescale/ls1012afrdm/Makefile
index dbfa2ce..1364f22 100644
--- a/board/freescale/ls1012afrdm/Makefile
+++ b/board/freescale/ls1012afrdm/Makefile
@@ -5,3 +5,4 @@
 #
 
 obj-y += ls1012afrdm.o
+obj-y += eth.o
diff --git a/board/freescale/ls1012afrdm/eth.c b/board/freescale/ls1012afrdm/eth.c
new file mode 100644
index 0000000..4f4fff8
--- /dev/null
+++ b/board/freescale/ls1012afrdm/eth.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <netdev.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <asm/types.h>
+#include <fsl_dtsec.h>
+#include <asm/arch/soc.h>
+#include <asm/arch-fsl-layerscape/config.h>
+#include <asm/arch-fsl-layerscape/immap_lsch2.h>
+#include <asm/arch/fsl_serdes.h>
+#include <pfe_eth/pfe_eth.h>
+#include <dm/platform_data/pfe_dm_eth.h>
+
+#define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
+#define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"
+
+#define MASK_ETH_PHY_RST	0x00000100
+
+static inline void ls1012afrdm_reset_phy(void)
+{
+	unsigned int val;
+	struct ccsr_gpio *pgpio = (void *)(GPIO1_BASE_ADDR);
+
+	setbits_be32(&pgpio->gpdir, MASK_ETH_PHY_RST);
+
+	val = in_be32(&pgpio->gpdat);
+	setbits_be32(&pgpio->gpdat, val & ~MASK_ETH_PHY_RST);
+	mdelay(10);
+
+	val = in_be32(&pgpio->gpdat);
+	setbits_be32(&pgpio->gpdat, val | MASK_ETH_PHY_RST);
+	mdelay(50);
+}
+
+int pfe_eth_board_init(struct udevice *dev)
+{
+	static int init_done;
+	struct mii_dev *bus;
+	struct pfe_mdio_info mac_mdio_info;
+	struct pfe_eth_dev *priv = dev_get_priv(dev);
+
+	if (!init_done) {
+		ls1012afrdm_reset_phy();
+
+		mac_mdio_info.reg_base = (void *)EMAC1_BASE_ADDR;
+		mac_mdio_info.name = DEFAULT_PFE_MDIO_NAME;
+
+		bus = pfe_mdio_init(&mac_mdio_info);
+		if (!bus) {
+			printf("Failed to register mdio\n");
+			return -1;
+		}
+
+		init_done = 1;
+	}
+
+	if (priv->gemac_port) {
+		mac_mdio_info.reg_base = (void *)EMAC2_BASE_ADDR;
+		mac_mdio_info.name = DEFAULT_PFE_MDIO1_NAME;
+		bus = pfe_mdio_init(&mac_mdio_info);
+		if (!bus) {
+			printf("Failed to register mdio\n");
+			return -1;
+		}
+	}
+
+	pfe_set_mdio(priv->gemac_port,
+		     miiphy_get_dev_by_name(DEFAULT_PFE_MDIO_NAME));
+	if (!priv->gemac_port)
+		/* MAC1 */
+		pfe_set_phy_address_mode(priv->gemac_port, EMAC1_PHY_ADDR,
+					 PHY_INTERFACE_MODE_SGMII);
+	else
+		/* MAC2 */
+		pfe_set_phy_address_mode(priv->gemac_port, EMAC2_PHY_ADDR,
+					 PHY_INTERFACE_MODE_SGMII);
+	return 0;
+}
+
+static struct pfe_eth_pdata pfe_pdata0 = {
+	.pfe_eth_pdata_mac = {
+		.iobase = (phys_addr_t)EMAC1_BASE_ADDR,
+		.phy_interface = 0,
+	},
+
+	.pfe_ddr_addr = {
+		.ddr_pfe_baseaddr = (void *)CONFIG_DDR_PFE_BASEADDR,
+		.ddr_pfe_phys_baseaddr = CONFIG_DDR_PFE_PHYS_BASEADDR,
+	},
+};
+
+static struct pfe_eth_pdata pfe_pdata1 = {
+	.pfe_eth_pdata_mac = {
+		.iobase = (phys_addr_t)EMAC2_BASE_ADDR,
+		.phy_interface = 1,
+	},
+
+	.pfe_ddr_addr = {
+		.ddr_pfe_baseaddr = (void *)CONFIG_DDR_PFE_BASEADDR,
+		.ddr_pfe_phys_baseaddr = CONFIG_DDR_PFE_PHYS_BASEADDR,
+	},
+};
+
+U_BOOT_DEVICE(ls1012a_pfe0) = {
+	.name = "pfe_eth",
+	.platdata = &pfe_pdata0,
+};
+
+U_BOOT_DEVICE(ls1012a_pfe1) = {
+	.name = "pfe_eth",
+	.platdata = &pfe_pdata1,
+};
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c
index 9afd1c4..0145886 100644
--- a/board/freescale/ls1012afrdm/ls1012afrdm.c
+++ b/board/freescale/ls1012afrdm/ls1012afrdm.c
@@ -57,11 +57,6 @@ int dram_init(void)
 	return 0;
 }
 
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}
-
 int board_early_init_f(void)
 {
 	fsl_lsch2_early_init_f();
-- 
2.7.4



More information about the U-Boot mailing list