[U-Boot] [PATCH 5/8] Convert CONFIG_BOOTCOUNT_RAM to Kconfig
Lukasz Majewski
lukma at denx.de
Sun Feb 11 19:04:08 UTC 2018
On Sun, 11 Feb 2018 12:06:50 +0000
Alex Kiernan <alex.kiernan at gmail.com> wrote:
> This converts the following to Kconfig:
> CONFIG_BOOTCOUNT_RAM
>
> Signed-off-by: Alex Kiernan <alex.kiernan at gmail.com>
> ---
>
> README | 2 --
> configs/km_kirkwood_128m16_defconfig | 1 +
> configs/km_kirkwood_defconfig | 1 +
> configs/km_kirkwood_pci_defconfig | 1 +
> configs/kmcoge5un_defconfig | 1 +
> configs/kmnusa_defconfig | 1 +
> configs/kmsugp1_defconfig | 1 +
> configs/kmsuv31_defconfig | 1 +
> configs/mgcoge3un_defconfig | 1 +
> configs/portl2_defconfig | 1 +
> configs/theadorable_debug_defconfig | 1 +
> drivers/bootcount/Kconfig | 6 ++++++
> include/configs/km/km_arm.h | 2 --
> include/configs/theadorable.h | 1 -
> scripts/config_whitelist.txt | 1 -
> 15 files changed, 16 insertions(+), 6 deletions(-)
>
> diff --git a/README b/README
> index 0581b58..20637e0 100644
> --- a/README
> +++ b/README
> @@ -2321,8 +2321,6 @@ The following options need to be configured:
> enable special bootcounter support on at91sam9xe
> based boards. CONFIG_SOC_DA8XX
> enable special bootcounter support on da850 based
> boards.
> - CONFIG_BOOTCOUNT_RAM
> - enable support for the bootcounter in RAM
> CONFIG_BOOTCOUNT_I2C
> enable support for the bootcounter on an i2c (like
> RTC) device. CONFIG_SYS_I2C_RTC_ADDR = i2c chip address
> diff --git a/configs/km_kirkwood_128m16_defconfig
> b/configs/km_kirkwood_128m16_defconfig index 075b4b3..a257275 100644
> --- a/configs/km_kirkwood_128m16_defconfig
> +++ b/configs/km_kirkwood_128m16_defconfig
> @@ -26,6 +26,7 @@ CONFIG_CMD_UBI=y
> # CONFIG_CMD_UBIFS is not set
> CONFIG_ENV_IS_IN_EEPROM=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_RAM=y
> # CONFIG_MMC is not set
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_STMICRO=y
> diff --git a/configs/km_kirkwood_defconfig
> b/configs/km_kirkwood_defconfig index 4ed097d..0d8c642 100644
> --- a/configs/km_kirkwood_defconfig
> +++ b/configs/km_kirkwood_defconfig
> @@ -26,6 +26,7 @@ CONFIG_CMD_UBI=y
> # CONFIG_CMD_UBIFS is not set
> CONFIG_ENV_IS_IN_EEPROM=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_RAM=y
> # CONFIG_MMC is not set
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_STMICRO=y
> diff --git a/configs/km_kirkwood_pci_defconfig
> b/configs/km_kirkwood_pci_defconfig index b47c1ad..112344d 100644
> --- a/configs/km_kirkwood_pci_defconfig
> +++ b/configs/km_kirkwood_pci_defconfig
> @@ -26,6 +26,7 @@ CONFIG_CMD_UBI=y
> # CONFIG_CMD_UBIFS is not set
> CONFIG_ENV_IS_IN_EEPROM=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_RAM=y
> # CONFIG_MMC is not set
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_STMICRO=y
> diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig
> index 96c4ad0..3db48bc 100644
> --- a/configs/kmcoge5un_defconfig
> +++ b/configs/kmcoge5un_defconfig
> @@ -26,6 +26,7 @@ CONFIG_CMD_UBI=y
> # CONFIG_CMD_UBIFS is not set
> CONFIG_ENV_IS_IN_SPI_FLASH=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_RAM=y
> # CONFIG_MMC is not set
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_STMICRO=y
> diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig
> index fec4017..b602932 100644
> --- a/configs/kmnusa_defconfig
> +++ b/configs/kmnusa_defconfig
> @@ -26,6 +26,7 @@ CONFIG_CMD_UBI=y
> # CONFIG_CMD_UBIFS is not set
> CONFIG_ENV_IS_IN_SPI_FLASH=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_RAM=y
> # CONFIG_MMC is not set
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_STMICRO=y
> diff --git a/configs/kmsugp1_defconfig b/configs/kmsugp1_defconfig
> index d1f1900..91bed21 100644
> --- a/configs/kmsugp1_defconfig
> +++ b/configs/kmsugp1_defconfig
> @@ -26,6 +26,7 @@ CONFIG_CMD_UBI=y
> # CONFIG_CMD_UBIFS is not set
> CONFIG_ENV_IS_IN_SPI_FLASH=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_RAM=y
> # CONFIG_MMC is not set
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_STMICRO=y
> diff --git a/configs/kmsuv31_defconfig b/configs/kmsuv31_defconfig
> index 9d4fbfe..a920664 100644
> --- a/configs/kmsuv31_defconfig
> +++ b/configs/kmsuv31_defconfig
> @@ -26,6 +26,7 @@ CONFIG_CMD_UBI=y
> # CONFIG_CMD_UBIFS is not set
> CONFIG_ENV_IS_IN_SPI_FLASH=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_RAM=y
> # CONFIG_MMC is not set
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_STMICRO=y
> diff --git a/configs/mgcoge3un_defconfig b/configs/mgcoge3un_defconfig
> index 250513d..6dff78b 100644
> --- a/configs/mgcoge3un_defconfig
> +++ b/configs/mgcoge3un_defconfig
> @@ -26,6 +26,7 @@ CONFIG_CMD_UBI=y
> # CONFIG_CMD_UBIFS is not set
> CONFIG_ENV_IS_IN_EEPROM=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_RAM=y
> # CONFIG_MMC is not set
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_STMICRO=y
> diff --git a/configs/portl2_defconfig b/configs/portl2_defconfig
> index 857dec1..4ca0094 100644
> --- a/configs/portl2_defconfig
> +++ b/configs/portl2_defconfig
> @@ -26,6 +26,7 @@ CONFIG_CMD_UBI=y
> # CONFIG_CMD_UBIFS is not set
> CONFIG_ENV_IS_IN_EEPROM=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_RAM=y
> # CONFIG_MMC is not set
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_STMICRO=y
> diff --git a/configs/theadorable_debug_defconfig
> b/configs/theadorable_debug_defconfig index b62645e..43c6e2c 100644
> --- a/configs/theadorable_debug_defconfig
> +++ b/configs/theadorable_debug_defconfig
> @@ -44,6 +44,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_SPL_OF_TRANSLATE=y
> CONFIG_SATA_MV=y
> CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_RAM=y
> CONFIG_FPGA_ALTERA=y
> CONFIG_DM_GPIO=y
> # CONFIG_MMC is not set
> diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
> index 40a0755..eabfd13 100644
> --- a/drivers/bootcount/Kconfig
> +++ b/drivers/bootcount/Kconfig
> @@ -40,6 +40,12 @@ config BOOTCOUNT_ENV
> So the Userspace Application must set the
> "upgrade_available" and "bootcount" variable to 0, if a boot was
> successfully.
> +config BOOTCOUNT_RAM
> + bool "Boot counter in RAM"
> + help
> + Store the bootcount in DRAM protected against against bit
^^^^^^^^^^^^^^ - this
could be probably
written in a better way.
> errors
> + due to short power loss or holding a system in RESET.
> +
> endchoice
>
> config SYS_BOOTCOUNT_SINGLEWORD
> diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
> index ed58d1e..ca23952 100644
> --- a/include/configs/km/km_arm.h
> +++ b/include/configs/km/km_arm.h
> @@ -277,8 +277,6 @@ int get_scl(void);
> #define CONFIG_KM_RESERVED_PRAM 0x801000
> /* address for the bootcount (taken from end of RAM) */
> #define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM)
> -/* Use generic bootcount RAM driver */
> -#define CONFIG_BOOTCOUNT_RAM
>
> /* enable POST tests */
> #define CONFIG_POST (CONFIG_SYS_POST_MEM_REGIONS)
> diff --git a/include/configs/theadorable.h
> b/include/configs/theadorable.h index ec9dc2e..a3b5c87 100644
> --- a/include/configs/theadorable.h
> +++ b/include/configs/theadorable.h
> @@ -83,7 +83,6 @@
> /*
> * Bootcounter
> */
> -#define CONFIG_BOOTCOUNT_RAM
> /* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */
> #define BOOTCOUNT_ADDR 0x1000
>
> diff --git a/scripts/config_whitelist.txt
> b/scripts/config_whitelist.txt index 0fd4ad6..487c790 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -150,7 +150,6 @@ CONFIG_BOOTBLOCK
> CONFIG_BOOTCOUNT_ALEN
> CONFIG_BOOTCOUNT_I2C
> CONFIG_BOOTCOUNT_LIMIT
> -CONFIG_BOOTCOUNT_RAM
> CONFIG_BOOTFILE
> CONFIG_BOOTMAPSZ
> CONFIG_BOOTMODE
Reviewed-by: Lukasz Majewski <lukma at denx.de>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180211/101a1529/attachment.sig>
More information about the U-Boot
mailing list