[U-Boot] [PATCH 10/10] mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support

[Marek Vasut]

On 02/09/2018 06:28 PM, Masahiro Yamada wrote:
> Jaehoon,
> 
> 2018-02-01 0:21 GMT+09:00 Marek Vasut <marek.vasut at gmail.com>:
>> Add code for PHY tuning required for SDR104/HS200 support on Renesas RCar.
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
>> Cc: Jaehoon Chung <jh80.chung at samsung.com>
>> Cc: Masahiro Yamada <yamada.masahiro at socionext.com>
>> ---
> 
> 
> Please apply whole of the series.
> 
> 
> This patch introduces warnings for configs/uniphier_v7_defconfig,
> but it is trivial to fix it up.
> 
> (Please replace 'static' with 'static inline')
> 
> 
> 
> 
>   CC      spl/drivers/core/ofnode.o
>   CC      spl/drivers/core/read_extra.o
>   LD      spl/drivers/core/built-in.o
>   CC      spl/drivers/mmc/mmc.o
>   CC      spl/drivers/mmc/mmc-uclass.o
>   CC      spl/drivers/mmc/mmc_boot.o
>   CC      spl/drivers/mmc/uniphier-sd.o
> In file included from drivers/mmc/uniphier-sd.c:21:0:
> drivers/mmc/uniphier-sd.h:149:12: warning:
> ‘rcar_gen3_sd_execute_tuning’ defined but not used [-Wunused-function]
>  static int rcar_gen3_sd_execute_tuning(struct udevice *dev, uint opcode)
>             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/mmc/uniphier-sd.h:145:13: warning: ‘rcar_gen3_sd_reset_tuning’
> defined but not used [-Wunused-function]
>  static void rcar_gen3_sd_reset_tuning(struct uniphier_sd_priv *priv)
>              ^~~~~~~~~~~~~~~~~~~~~~~~~
>   LD      spl/drivers/mmc/built-in.o
>   CC      spl/drivers/mtd/nand/denali_spl.o
>   LD      spl/drivers/mtd/nand/built-in.o
>   CC      spl/drivers/pinctrl/pinctrl-uclass.o
>   CC      spl/drivers/pinctrl/pinctrl-generic.o
> 
> 
> 
[...]
Jaehoon, any news here ?

-- 
Best regards,
Marek Vasut