[U-Boot] [PATCH v4 21/34] usb: sunxi: Switch to use generic-phy

[Marek Vasut]

On 02/06/2018 03:25 PM, Jagan Teki wrote:
> Allwinner USB PHY handling can be done through driver-model
> generic-phy so add the generic-phy ops to relevant places
> on host and musb sunxi driver and enable them in respective
> SOC's.
> 
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  arch/arm/mach-sunxi/Kconfig       |  9 +++++++
>  c                                 |  0

What is this ?

>  drivers/usb/host/ehci-sunxi.c     | 52 +++++++++++++++++++++++++++---------
>  drivers/usb/host/ohci-sunxi.c     | 54 +++++++++++++++++++++++++++----------
>  drivers/usb/musb-new/musb_uboot.c |  3 ---
>  drivers/usb/musb-new/sunxi.c      | 56 ++++++++++++++++++++++++++++++++-------
>  6 files changed, 135 insertions(+), 39 deletions(-)
>  create mode 100644 c

[...]


-- 
Best regards,
Marek Vasut