[U-Boot] [PATCH v2 17/20] sunxi: automatically select SPL_NAND_SUPPORT in Kconfig

[Miquel Raynal]

Make SUNXI_NAND select SPL_NAND_SUPPORT in Kconfig, this limit the
number of entries to add in defconfig files when adding NAND support.

For now, the only board using it is the CHIP pro.

Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 configs/CHIP_pro_defconfig | 1 -
 drivers/mtd/nand/Kconfig   | 1 +
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig
index a98bb40c03..5e5fae9a36 100644
--- a/configs/CHIP_pro_defconfig
+++ b/configs/CHIP_pro_defconfig
@@ -1,7 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SYS_TEXT_BASE=0x4a000000
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index dcb8ff66ae..75eefc8a2b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -98,6 +98,7 @@ config NAND_SUNXI
 	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I
 	select SYS_NAND_SELF_INIT
 	select SYS_NAND_U_BOOT_LOCATIONS
+	select SPL_NAND_SUPPORT
 	imply CMD_NAND
 	---help---
 	Enable support for NAND. This option enables the standard and
-- 
2.14.1