[U-Boot] [U-Boot PATCH 2/2] defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig

[Lokesh Vutla]

+Tom

On Friday 16 February 2018 11:22 PM, Madan Srinivas wrote:
> Adds a dedicated defconfig to build TI K2L secure
> devices. Created from the k2l_evm_defconfig and
> removes support for SPL, as SPL is not supported
> on K2 HS devices. Corrects SYS_TEXT_BASE for HS
> devices.
> 
> Also adds TI_SECURE_DEVICE and FIT_IMAGE_POST_PROCESS to
> include support for secure image creation and authentication
> 
> Signed-off-by: Madan Srinivas <madans at ti.com>

Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>

Thanks and regards,
Lokesh

> ---
> 
>  configs/k2l_hs_evm_defconfig | 43 +++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 43 insertions(+)
>  create mode 100644 configs/k2l_hs_evm_defconfig
> 
> diff --git a/configs/k2l_hs_evm_defconfig b/configs/k2l_hs_evm_defconfig
> new file mode 100644
> index 0000000..cc002d3
> --- /dev/null
> +++ b/configs/k2l_hs_evm_defconfig
> @@ -0,0 +1,43 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_KEYSTONE=y
> +CONFIG_TI_SECURE_DEVICE=y
> +CONFIG_SYS_TEXT_BASE=0xC000060
> +CONFIG_TI_COMMON_CMD_OPTIONS=y
> +CONFIG_TARGET_K2L_EVM=y
> +CONFIG_DEFAULT_DEVICE_TREE="keystone-k2l-evm"
> +CONFIG_FIT_IMAGE_POST_PROCESS=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
> +CONFIG_VERSION_VARIABLE=y
> +CONFIG_BOARD_EARLY_INIT_F=y
> +CONFIG_HUSH_PARSER=y
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_GPIO is not set
> +# CONFIG_CMD_GPT is not set
> +# CONFIG_CMD_MMC is not set
> +CONFIG_CMD_NAND=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0"
> +CONFIG_MTDPARTS_DEFAULT="mtdparts=davinci_nand.0:1024k(bootloader)ro,512k(params)ro,-(ubifs)"
> +CONFIG_CMD_UBI=y
> +CONFIG_ISO_PARTITION=y
> +CONFIG_EFI_PARTITION=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_ENV_IS_IN_NAND=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_DM=y
> +CONFIG_TI_AEMIF=y
> +# CONFIG_MMC is not set
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_PHYLIB=y
> +CONFIG_DM_ETH=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_SYS_NS16550=y
> +CONFIG_DM_SPI=y
> +CONFIG_DAVINCI_SPI=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_STORAGE=y
>