[U-Boot] [PATCH] rockchip: clk: rk3399: handle set_rate/get_rate for PLL_PPLL
Philipp Tomsich
philipp.tomsich at theobroma-systems.com
Fri Feb 23 16:36:41 UTC 2018
The device-tree node for the PMU clk controller assigns to its parent
(i.e. PLL_PPLL) even though this clock currently is set up statically
by an init-function.
In order to avoid unexpected failures, a simple implementation of
set_rate (which accepts requests, but notifies the caller of the
preset frequency in its return value) and get_rate (which always
returns the preset frequency) are added.
Note that this is required for the RK808 PMIC to probe successfully on
the RK3399-Q7, following the support for the assigned-clocks property.
References: commit f4fcba5c5baa ("clk: implement clk_set_defaults()")
Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger at theobroma-systems.com>
---
drivers/clk/rockchip/clk_rk3399.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
index 42926ba..37237e3 100644
--- a/drivers/clk/rockchip/clk_rk3399.c
+++ b/drivers/clk/rockchip/clk_rk3399.c
@@ -1236,6 +1236,8 @@ static ulong rk3399_pmuclk_get_rate(struct clk *clk)
ulong rate = 0;
switch (clk->id) {
+ case PLL_PPLL:
+ return PPLL_HZ;
case PCLK_RKPWM_PMU:
rate = rk3399_pwm_get_clk(priv->pmucru);
break;
@@ -1257,7 +1259,13 @@ static ulong rk3399_pmuclk_set_rate(struct clk *clk, ulong rate)
ulong ret = 0;
switch (clk->id) {
+ case PLL_PPLL:
+ /*
+ * This has already been set up and we don't want/need
+ * to change it here. Accept the request though, as the
+ * device-tree has this in an 'assigned-clocks' list.
+ */
+ return PPLL_HZ;
case SCLK_I2C0_PMU:
case SCLK_I2C4_PMU:
case SCLK_I2C8_PMU:
--
2.1.4
More information about the U-Boot
mailing list