[U-Boot] [PATCH v2 0/3] ARM: omap3: beagle, evm: synchronize common setup

[Derald D. Woods]

This short series is an attempt to make this set of boards use the same
default configuration items where possible. This was prompted by an
investigation into enabling SERIAL_SEARCH_ALL on omap3_evm. This feature
now works for omap3_evm after this series.

The series changes the default NAND layout of MTDPARTS_DEFAULT and
uses ENV_IS_IN_FAT. More detail is provided with the patches. As most
things are configurable now, this should not be an issue. I am trying
to get simple defaults that just boot and expose the common core
features. This will make future testing and maintenance a bit more
predictable, as there will be a very similar comparable set of boards.

Derald D. Woods (3):
  ARM: omap3: beagle: Set 'mtdids' and 'mtdparts' in board file
  ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND
    layout
  ARM: omap3: evm: Sync with omap3_beagle configuration

 board/ti/beagle/beagle.c       |   8 ++
 configs/omap3_beagle_defconfig |  29 ++++-
 configs/omap3_evm_defconfig    |  25 +++--
 include/configs/omap3_beagle.h | 241 +++++++++++++++++++++++------------------
 include/configs/omap3_evm.h    |  71 +++++++-----
 5 files changed, 220 insertions(+), 154 deletions(-)

--

v2:
- update cover letter and remove 'RFC' from series
- rebase and test on recent master

-- 
2.16.2