[U-Boot] [RFC PATCH 3/3] ARM: omap3: evm: Sync with omap3_beagle configuration

Derald D. Woods woods.technical at gmail.com
Mon Feb 12 05:13:29 UTC 2018


This commit does the following for OMAP3 EVM:

- Track omap3_beagle changes where possible
- Remove CONFIG_SYS_MPUCLK and CONFIG_MTD which are not needed for the
  default board configuration to work.
- Remove CONFIG_SPL_SYS_MALLOC_SIMPLE and CONFIG_SYS_MALLOC_F_LEN from
  default config. CONFIG_SYS_MALLOC_F_LEN=0x400 is set by configuration
  automatically. [allows board to boot with SERIAL_SEARCH_ALL=y]
- Use CONFIG_ENV_IS_IN_FAT because of development flexibility
- Use updated NAND layout:

	device nand0 <omap2-nand.0>, # parts = 6

	#: name		size			offset
	-------------------------------------------------
	0: spl		0x00080000(512k)	0x00000000
	1: u-boot	0x001e0000(1920k)	0x00080000
	2: u-boot-env	0x00020000(128k)	0x00260000
	3: dtb		0x00020000(128k)	0x00280000
	4: kernel	0x00600000(6m)		0x002a0000
	5: rootfs	0x0f760000(-)		0x008a0000
	-------------------------------------------------

Signed-off-by: Derald D. Woods <woods.technical at gmail.com>
---
 configs/omap3_evm_defconfig | 25 +++++++++-------
 include/configs/omap3_evm.h | 71 ++++++++++++++++++++++++++-------------------
 2 files changed, 55 insertions(+), 41 deletions(-)

diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig
index 34998777a0..6ed470fe1e 100644
--- a/configs/omap3_evm_defconfig
+++ b/configs/omap3_evm_defconfig
@@ -1,22 +1,22 @@
 CONFIG_ARM=y
 CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_SYS_TEXT_BASE=0x80100000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_SYS_MPUCLK=720
 CONFIG_TARGET_OMAP3_EVM=y
 CONFIG_DEFAULT_DEVICE_TREE="omap3-evm"
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_DEFAULT_FDT_FILE="omap3-evm.dtb"
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_ENV_SUPPORT=y
 # CONFIG_SPL_EXT_SUPPORT is not set
 CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
 CONFIG_SYS_PROMPT="OMAP3_EVM # "
-# CONFIG_CMD_IMI is not set
+CONFIG_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x82000000
+CONFIG_CMD_SPL=y
+CONFIG_CMD_SPL_NAND_OFS=0x280000
+CONFIG_CMD_SPL_WRITE_SIZE=0x20000
 CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
@@ -30,23 +30,27 @@ CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FS_UUID=y
 CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1792k(u-boot),128k(dtb),128k(u-boot-env),6m(kernel),-(rootfs)"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)"
 CONFIG_CMD_UBI=y
 # CONFIG_ISO_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SPL_PARTITION_UUIDS=y
 CONFIG_OF_CONTROL=y
-CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_FAT_INTERFACE="mmc"
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
 CONFIG_SPL_DM=y
 CONFIG_MMC_OMAP_HS=y
-CONFIG_MTD=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
 CONFIG_SPL_NAND_SIMPLE=y
 CONFIG_NETDEVICES=y
 CONFIG_SMC911X=y
 CONFIG_SMC911X_BASE=0x2C000000
 CONFIG_SMC911X_32_BIT=y
+CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
@@ -54,14 +58,13 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OMAP3=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_OMAP2PLUS=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451
 CONFIG_USB_GADGET_PRODUCT_NUM=0x5678
-CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_ETHER=y
 CONFIG_FAT_WRITE=y
 CONFIG_BCH=y
-CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SPL_OF_LIBFDT=y
 # CONFIG_EFI_LOADER is not set
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index c143c5af5c..d74be94c79 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -56,26 +56,20 @@
 #define CONFIG_SYS_NAND_ECCSIZE         512
 #define CONFIG_SYS_NAND_ECCBYTES        3
 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
-#define CONFIG_ENV_IS_IN_NAND           1
-#define CONFIG_ENV_SIZE                 (128 << 10) /* 128 KiB */
-#define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10) /* 128 KiB */
+#define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
 #define CONFIG_ENV_OFFSET               0x260000
 #define CONFIG_ENV_ADDR                 0x260000
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_MTD_PARTITIONS           /* required for UBI partition support */
 /* NAND: SPL falcon mode configs */
 #if defined(CONFIG_SPL_OS_BOOT)
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
 #endif /* CONFIG_SPL_OS_BOOT */
 #endif /* CONFIG_NAND */
 
-/* MUSB */
-
-/* USB EHCI */
-#define CONFIG_SYS_USB_FAT_BOOT_PARTITION  1
-
 /* Environment */
+#define CONFIG_ENV_SIZE                 SZ_128K
+
 #define CONFIG_PREBOOT                  "usb start"
 
 #include <config_distro_defaults.h>
@@ -83,26 +77,39 @@
 #define MEM_LAYOUT_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV
 
-#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
-	"bootcmd_" #devtypel #instance "=" \
-	"run nandboot\0"
-#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
-	#devtypel #instance " "
-
 #define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
 	"bootcmd_" #devtypel #instance "=" \
 	"setenv mmcdev " #instance "; " \
-	"setenv bootpart " #instance ":${mmcpart} ; " \
 	"run mmcboot\0"
 #define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
 	#devtypel #instance " "
 
+#if defined(CONFIG_NAND)
+
+#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
+	"bootcmd_" #devtypel #instance "=" \
+	"if test ${mtdids} = '' || test ${mtdparts} = '' ; then " \
+		"echo NAND boot disabled: No mtdids and/or mtdparts; " \
+	"else " \
+		"run nandboot; " \
+	"fi\0"
+#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
+	#devtypel #instance " "
+
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(LEGACY_MMC, legacy_mmc, 0) \
 	func(UBIFS, ubifs, 0) \
 	func(NAND, nand, 0)
 
+#else /* !CONFIG_NAND */
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(LEGACY_MMC, legacy_mmc, 0)
+
+#endif /* CONFIG_NAND */
+
 #include <config_distro_bootcmd.h>
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -111,31 +118,29 @@
 	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"fdt_high=0xffffffff\0" \
+	"console=ttyO0,115200n8\0" \
 	"bootdir=/boot\0" \
 	"bootenv=uEnv.txt\0" \
 	"bootfile=zImage\0" \
+	"bootpart=0:2\0" \
 	"bootubivol=rootfs\0" \
 	"bootubipart=rootfs\0" \
 	"optargs=\0" \
 	"mmcdev=0\0" \
 	"mmcpart=2\0" \
-	"bootpart=${mmcdev}:${mmcpart}\0" \
-	"console=ttyO0,115200n8\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"mmcrootfstype=ext4 rootwait\0" \
 	"mmcargs=setenv bootargs console=${console} " \
 		"${mtdparts} " \
 		"${optargs} " \
-		"root=/dev/mmcblk0p2 rw " \
-		"rootfstype=ext4 rootwait\0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"${mtdparts} " \
-		"${optargs} " \
-		"root=ubi0:rootfs rw ubi.mtd=rootfs noinitrd " \
-		"rootfstype=ubifs rootwait\0" \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
 	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
 	"ext4bootenv=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootenv}\0" \
-	"importbootenv=echo Importing environment from mmc ...; " \
+	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
 		"env import -t ${loadaddr} ${filesize}\0" \
-	"mmcbootenv=mmc dev ${mmcdev}; " \
+	"mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \
+		"mmc dev ${mmcdev}; " \
 		"if mmc rescan; then " \
 			"run loadbootenv && run importbootenv; " \
 			"run ext4bootenv && run importbootenv; " \
@@ -157,8 +162,14 @@
 				"bootz ${loadaddr} - ${fdtaddr}; " \
 			"fi; " \
 		"fi\0" \
-	"nandboot=" \
-		"if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb; then " \
+	"nandroot=ubi0:rootfs ubi.mtd=rootfs rw noinitrd\0" \
+	"nandrootfstype=ubifs rootwait\0" \
+	"nandargs=setenv bootargs console=${console} " \
+		"${mtdparts} " \
+		"${optargs} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
+	"nandboot=if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb; then " \
 			"echo Booting uImage from NAND MTD 'kernel' partition ...; " \
 			"run nandargs; " \
 			"bootm ${loadaddr} - ${fdtaddr}; " \
-- 
2.16.1



More information about the U-Boot mailing list