[U-Boot] [PATCH v2 1/9] ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux
Jagan Teki
jagannadh.teki at gmail.com
Wed Feb 14 15:56:14 UTC 2018
Sync rk3288-vyasa board dts from Linux for proper updates and maintenance
- rk3288-vyasa.dts: Similar to Linux dts
- rk3288-vyasa-u-boot.dtsi: u-boot dts changes
Also updated MAINTAINERS for these dts files.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Acked-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
---
arch/arm/dts/rk3288-vyasa-u-boot.dtsi | 29 +++++++
arch/arm/dts/rk3288-vyasa.dts | 134 ++++++++++++++++++---------------
board/amarula/vyasa-rk3288/MAINTAINERS | 2 +
3 files changed, 105 insertions(+), 60 deletions(-)
create mode 100644 arch/arm/dts/rk3288-vyasa-u-boot.dtsi
diff --git a/arch/arm/dts/rk3288-vyasa-u-boot.dtsi b/arch/arm/dts/rk3288-vyasa-u-boot.dtsi
new file mode 100644
index 0000000..b3a56e9
--- /dev/null
+++ b/arch/arm/dts/rk3288-vyasa-u-boot.dtsi
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jagan at amarulasolutions.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+&dmc {
+ rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
+ 0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+ 0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+ 0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+ 0x5 0x0>;
+ rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+ 0xa60 0x40 0x10 0x0>;
+ /* Add a dummy value to cause of-platdata think this is bytes */
+ rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+};
+
+&sdmmc {
+ u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
index 93a9c5e..932311c 100644
--- a/arch/arm/dts/rk3288-vyasa.dts
+++ b/arch/arm/dts/rk3288-vyasa.dts
@@ -52,8 +52,8 @@
};
memory {
+ reg = <0x0 0x0 0x0 0x80000000>;
device_type = "memory";
- reg = <0 0x80000000>;
};
vcc_sd: sdmmc-regulator {
@@ -78,22 +78,20 @@
};
};
-&dmc {
- rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
- 0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
- 0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
- 0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
- 0x5 0x0>;
- rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
- 0xa60 0x40 0x10 0x0>;
- /* Add a dummy value to cause of-platdata think this is bytes */
- rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
-};
-
&cpu0 {
cpu0-supply = <&vdd_cpu>;
};
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
&i2c0 {
clock-frequency = <400000>;
status = "okay";
@@ -103,12 +101,12 @@
reg = <0x1b>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
- wakeup-source;
rockchip,system-power-controller;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
+ wakeup-source;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
@@ -124,22 +122,22 @@
regulators {
vdd_cpu: vdd_log: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vdd_log";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
- regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vdd_gpu";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
- regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
@@ -147,20 +145,20 @@
};
vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
- regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_io: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc_io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_io";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
@@ -168,11 +166,11 @@
};
vcca_tp: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc_tp";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_tp";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
@@ -180,22 +178,22 @@
};
vcc_codec: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc_codec";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_codec";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_10: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vdd_10";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
- regulator-name = "vdd_10";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
@@ -203,11 +201,11 @@
};
vcc_gps: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc_gps";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_gps";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
@@ -215,11 +213,11 @@
};
vccio_sd: LDO_REG5 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
@@ -227,11 +225,11 @@
};
vcc10_lcd: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc10_lcd";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
- regulator-name = "vcc10_lcd";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
@@ -239,11 +237,11 @@
};
vcc_18: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_18";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
@@ -251,11 +249,11 @@
};
vcc18_lcd: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc18_lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_lcd";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
@@ -263,22 +261,22 @@
};
vcc33_sd: SWITCH_REG1 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc33_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-name = "vcc33_sd";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_lan: SWITCH_REG2 {
- regulator-always-on;
- regulator-boot-on;
+ regulator-name = "vcc_lan";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_lan";
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
@@ -287,10 +285,11 @@
};
};
-&sdmmc {
- u-boot,dm-pre-reloc;
+&i2c2 {
status = "okay";
+};
+&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
@@ -300,10 +299,26 @@
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vccio_sd>;
+ status = "okay";
};
&uart2 {
- u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
status = "okay";
};
@@ -312,7 +327,6 @@
};
&pinctrl {
- u-boot,dm-pre-reloc;
pmic {
pmic_int: pmic-int {
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/board/amarula/vyasa-rk3288/MAINTAINERS b/board/amarula/vyasa-rk3288/MAINTAINERS
index 10397fc..08ea208 100644
--- a/board/amarula/vyasa-rk3288/MAINTAINERS
+++ b/board/amarula/vyasa-rk3288/MAINTAINERS
@@ -4,3 +4,5 @@ S: Maintained
F: board/amarula/vyasa-rk3288
F: include/configs/vyasa-rk3288.h
F: configs/vyasa-rk3288_defconfig
+F: arch/arm/dts/rk3288-vyasa.dts
+F: arch/arm/dts/rk3288-vyasa-u-boot.dtsi
--
2.7.4
More information about the U-Boot
mailing list