[U-Boot] [PATCH v2] net: Remove Xilinx ll_temac driver
Michal Simek
michal.simek at xilinx.com
Tue Feb 20 09:19:00 UTC 2018
ll_temac driver was used by Xilinx Microblaze big endian and
Xilinx ppc405/ppc440 SoCs.
ppc support was removed by: "powerpc: remove 4xx support"
(sha1: 98f705c9cefdfdba62c069821bbba10273a0a8ed)
and Microblaze BE is not tested for a long time that's why this driver
can be removed because none is going to updated it to DM anyway.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger at ni.com>
---
Changes in v2:
- fix netdev.h
Travis build in progress
https://travis-ci.org/michalsimek/u-boot/builds/342284080
---
drivers/net/Makefile | 2 -
drivers/net/xilinx_ll_temac.c | 394 -------------------------------------
drivers/net/xilinx_ll_temac.h | 307 -----------------------------
drivers/net/xilinx_ll_temac_fifo.c | 139 -------------
drivers/net/xilinx_ll_temac_fifo.h | 118 -----------
drivers/net/xilinx_ll_temac_mdio.c | 177 -----------------
drivers/net/xilinx_ll_temac_mdio.h | 50 -----
drivers/net/xilinx_ll_temac_sdma.c | 307 -----------------------------
drivers/net/xilinx_ll_temac_sdma.h | 266 -------------------------
include/netdev.h | 11 --
scripts/config_whitelist.txt | 1 -
11 files changed, 1772 deletions(-)
delete mode 100644 drivers/net/xilinx_ll_temac.c
delete mode 100644 drivers/net/xilinx_ll_temac.h
delete mode 100644 drivers/net/xilinx_ll_temac_fifo.c
delete mode 100644 drivers/net/xilinx_ll_temac_fifo.h
delete mode 100644 drivers/net/xilinx_ll_temac_mdio.c
delete mode 100644 drivers/net/xilinx_ll_temac_mdio.h
delete mode 100644 drivers/net/xilinx_ll_temac_sdma.c
delete mode 100644 drivers/net/xilinx_ll_temac_sdma.h
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index ac5443c752c2..4a16c62bac09 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -66,8 +66,6 @@ obj-$(CONFIG_ULI526X) += uli526x.o
obj-$(CONFIG_VSC7385_ENET) += vsc7385.o
obj-$(CONFIG_XILINX_AXIEMAC) += xilinx_axi_emac.o
obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
-obj-$(CONFIG_XILINX_LL_TEMAC) += xilinx_ll_temac.o xilinx_ll_temac_mdio.o \
- xilinx_ll_temac_fifo.o xilinx_ll_temac_sdma.o
obj-$(CONFIG_ZYNQ_GEM) += zynq_gem.o
obj-$(CONFIG_FSL_MC_ENET) += fsl-mc/
obj-$(CONFIG_FSL_MC_ENET) += ldpaa_eth/
diff --git a/drivers/net/xilinx_ll_temac.c b/drivers/net/xilinx_ll_temac.c
deleted file mode 100644
index 1e7e2e49af9c..000000000000
--- a/drivers/net/xilinx_ll_temac.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * Xilinx xps_ll_temac ethernet driver for u-boot
- *
- * supports SDMA or FIFO access and MDIO bus communication
- *
- * Copyright (C) 2011 - 2012 Stephan Linz <linz at li-pro.net>
- * Copyright (C) 2008 - 2011 Michal Simek <monstr at monstr.eu>
- * Copyright (C) 2008 - 2011 PetaLogix
- *
- * Based on Yoshio Kashiwagi kashiwagi at co-nss.co.jp driver
- * Copyright (C) 2008 Nissin Systems Co.,Ltd.
- * March 2008 created
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * [0]: http://www.xilinx.com/support/documentation
- *
- * [S]: [0]/ip_documentation/xps_ll_temac.pdf
- * [A]: [0]/application_notes/xapp1041.pdf
- */
-
-#include <config.h>
-#include <common.h>
-#include <net.h>
-#include <netdev.h>
-#include <malloc.h>
-#include <asm/io.h>
-#include <miiphy.h>
-
-#include "xilinx_ll_temac.h"
-#include "xilinx_ll_temac_fifo.h"
-#include "xilinx_ll_temac_sdma.h"
-#include "xilinx_ll_temac_mdio.h"
-
-#if !defined(CONFIG_MII)
-# error "LL_TEMAC requires MII -- missing CONFIG_MII"
-#endif
-
-#if !defined(CONFIG_PHYLIB)
-# error "LL_TEMAC requires PHYLIB -- missing CONFIG_PHYLIB"
-#endif
-
-struct ll_temac_info {
- int flags;
- unsigned long base_addr;
- unsigned long ctrl_addr;
- char *devname;
- unsigned int phyaddr;
- char *mdio_busname;
-};
-
-/* Ethernet interface ready status */
-int ll_temac_check_status(struct temac_reg *regs, u32 mask)
-{
- unsigned timeout = 50; /* 1usec * 50 = 50usec */
-
- /*
- * Quote from LL TEMAC documentation: The bits in the RDY
- * register are asserted when there is no access in progress.
- * When an access is in progress, a bit corresponding to the
- * type of access is automatically de-asserted. The bit is
- * automatically re-asserted when the access is complete.
- */
- while (timeout && (!(in_be32(®s->rdy) & mask))) {
- timeout--;
- udelay(1);
- }
-
- if (!timeout) {
- printf("%s: Timeout on 0x%08x @%p\n", __func__,
- mask, ®s->rdy);
- return 1;
- }
-
- return 0;
-}
-
-/*
- * Indirect write to ll_temac.
- *
- * http://www.xilinx.com/support/documentation/ip_documentation/xps_ll_temac.pdf
- * page 23, second paragraph, The use of CTL0 register or CTL1 register
- */
-int ll_temac_indirect_set(struct temac_reg *regs, u16 regn, u32 reg_data)
-{
- out_be32(®s->lsw, (reg_data & MLSW_MASK));
- out_be32(®s->ctl, CTL_WEN | (regn & CTL_ADDR_MASK));
-
- if (ll_temac_check_status(regs, RSE_CFG_WR))
- return 0;
-
- return 1;
-}
-
-/*
- * Indirect read from ll_temac.
- *
- * http://www.xilinx.com/support/documentation/ip_documentation/xps_ll_temac.pdf
- * page 23, second paragraph, The use of CTL0 register or CTL1 register
- */
-int ll_temac_indirect_get(struct temac_reg *regs, u16 regn, u32* reg_data)
-{
- out_be32(®s->ctl, (regn & CTL_ADDR_MASK));
-
- if (ll_temac_check_status(regs, RSE_CFG_RR))
- return 0;
-
- *reg_data = in_be32(®s->lsw) & MLSW_MASK;
- return 1;
-}
-
-/* setting sub-controller and ll_temac to proper setting */
-static int ll_temac_setup_ctrl(struct eth_device *dev)
-{
- struct ll_temac *ll_temac = dev->priv;
- struct temac_reg *regs = (struct temac_reg *)dev->iobase;
-
- if (ll_temac->ctrlreset && ll_temac->ctrlreset(dev))
- return 0;
-
- if (ll_temac->ctrlinit && ll_temac->ctrlinit(dev))
- return 0;
-
- /* Promiscuous mode disable */
- if (!ll_temac_indirect_set(regs, TEMAC_AFM, 0))
- return 0;
-
- /* Enable Receiver - RX bit */
- if (!ll_temac_indirect_set(regs, TEMAC_RCW1, RCW1_RX))
- return 0;
-
- /* Enable Transmitter - TX bit */
- if (!ll_temac_indirect_set(regs, TEMAC_TC, TC_TX))
- return 0;
-
- return 1;
-}
-
-/*
- * Configure ll_temac based on negotiated speed and duplex
- * reported by PHY handling code
- */
-static int ll_temac_adjust_link(struct eth_device *dev)
-{
- unsigned int speed, emmc_reg;
- struct temac_reg *regs = (struct temac_reg *)dev->iobase;
- struct ll_temac *ll_temac = dev->priv;
- struct phy_device *phydev = ll_temac->phydev;
-
- if (!phydev->link) {
- printf("%s: No link.\n", phydev->dev->name);
- return 0;
- }
-
- switch (phydev->speed) {
- case 1000:
- speed = EMMC_LSPD_1000;
- break;
- case 100:
- speed = EMMC_LSPD_100;
- break;
- case 10:
- speed = EMMC_LSPD_10;
- break;
- default:
- return 0;
- }
-
- if (!ll_temac_indirect_get(regs, TEMAC_EMMC, &emmc_reg))
- return 0;
-
- emmc_reg &= ~EMMC_LSPD_MASK;
- emmc_reg |= speed;
-
- if (!ll_temac_indirect_set(regs, TEMAC_EMMC, emmc_reg))
- return 0;
-
- printf("%s: PHY is %s with %dbase%s, %s%s\n",
- dev->name, phydev->drv->name,
- phydev->speed, (phydev->port == PORT_TP) ? "T" : "X",
- (phydev->duplex) ? "FDX" : "HDX",
- (phydev->port == PORT_OTHER) ? ", unkown mode" : "");
-
- return 1;
-}
-
-/* setup mac addr */
-static int ll_temac_setup_mac_addr(struct eth_device *dev)
-{
- struct temac_reg *regs = (struct temac_reg *)dev->iobase;
- u32 val;
-
- /* set up unicast MAC address filter */
- val = ((dev->enetaddr[3] << 24) | (dev->enetaddr[2] << 16) |
- (dev->enetaddr[1] << 8) | (dev->enetaddr[0]));
- val &= UAW0_UADDR_MASK;
-
- if (!ll_temac_indirect_set(regs, TEMAC_UAW0, val))
- return 1;
-
- val = ((dev->enetaddr[5] << 8) | dev->enetaddr[4]);
- val &= UAW1_UADDR_MASK;
-
- if (!ll_temac_indirect_set(regs, TEMAC_UAW1, val))
- return 1;
-
- return 0;
-}
-
-/* halt device */
-static void ll_temac_halt(struct eth_device *dev)
-{
- struct ll_temac *ll_temac = dev->priv;
- struct temac_reg *regs = (struct temac_reg *)dev->iobase;
-
- /* Disable Receiver */
- ll_temac_indirect_set(regs, TEMAC_RCW0, 0);
-
- /* Disable Transmitter */
- ll_temac_indirect_set(regs, TEMAC_TC, 0);
-
- if (ll_temac->ctrlhalt)
- ll_temac->ctrlhalt(dev);
-
- /* Shut down the PHY, as needed */
- phy_shutdown(ll_temac->phydev);
-}
-
-static int ll_temac_init(struct eth_device *dev, bd_t *bis)
-{
- struct ll_temac *ll_temac = dev->priv;
- int ret;
-
- printf("%s: Xilinx XPS LocalLink Tri-Mode Ether MAC #%d at 0x%08lx.\n",
- dev->name, dev->index, dev->iobase);
-
- if (!ll_temac_setup_ctrl(dev))
- return -1;
-
- /* Start up the PHY */
- ret = phy_startup(ll_temac->phydev);
- if (ret) {
- printf("%s: Could not initialize PHY %s\n",
- dev->name, ll_temac->phydev->dev->name);
- return ret;
- }
-
- if (!ll_temac_adjust_link(dev)) {
- ll_temac_halt(dev);
- return -1;
- }
-
- /* If there's no link, fail */
- return ll_temac->phydev->link ? 0 : -1;
-}
-
-/*
- * Discover which PHY is attached to the device, and configure it
- * properly. If the PHY is not recognized, then return 0
- * (failure). Otherwise, return 1
- */
-static int ll_temac_phy_init(struct eth_device *dev)
-{
- struct ll_temac *ll_temac = dev->priv;
- struct phy_device *phydev;
- unsigned int supported = PHY_GBIT_FEATURES;
-
- /* interface - look at driver/net/tsec.c */
- phydev = phy_connect(ll_temac->bus, ll_temac->phyaddr,
- dev, PHY_INTERFACE_MODE_NONE);
-
- phydev->supported &= supported;
- phydev->advertising = phydev->supported;
-
- ll_temac->phydev = phydev;
-
- phy_config(phydev);
-
- return 1;
-}
-
-/*
- * Initialize a single ll_temac devices
- *
- * Returns the result of ll_temac phy interface that were initialized
- */
-int xilinx_ll_temac_initialize(bd_t *bis, struct ll_temac_info *devinf)
-{
- struct eth_device *dev;
- struct ll_temac *ll_temac;
-
- dev = calloc(1, sizeof(*dev));
- if (dev == NULL)
- return 0;
-
- ll_temac = calloc(1, sizeof(struct ll_temac));
- if (ll_temac == NULL) {
- free(dev);
- return 0;
- }
-
- /* use given name or generate its own unique name */
- if (devinf->devname) {
- strncpy(dev->name, devinf->devname, sizeof(dev->name));
- } else {
- snprintf(dev->name, sizeof(dev->name), "ll_tem.%lx",
- devinf->base_addr);
- devinf->devname = dev->name;
- }
-
- dev->iobase = devinf->base_addr;
-
- dev->priv = ll_temac;
- dev->init = ll_temac_init;
- dev->halt = ll_temac_halt;
- dev->write_hwaddr = ll_temac_setup_mac_addr;
-
- ll_temac->ctrladdr = devinf->ctrl_addr;
- if (devinf->flags & XILINX_LL_TEMAC_M_SDMA_PLB) {
- ll_temac_collect_xlplb_sdma_reg_addr(dev);
- ll_temac->in32 = ll_temac_xlplb_in32;
- ll_temac->out32 = ll_temac_xlplb_out32;
- ll_temac->ctrlinit = ll_temac_init_sdma;
- ll_temac->ctrlhalt = ll_temac_halt_sdma;
- ll_temac->ctrlreset = ll_temac_reset_sdma;
- dev->recv = ll_temac_recv_sdma;
- dev->send = ll_temac_send_sdma;
- } else {
- ll_temac->in32 = NULL;
- ll_temac->out32 = NULL;
- ll_temac->ctrlinit = NULL;
- ll_temac->ctrlhalt = NULL;
- ll_temac->ctrlreset = ll_temac_reset_fifo;
- dev->recv = ll_temac_recv_fifo;
- dev->send = ll_temac_send_fifo;
- }
-
- /* Link to specified MDIO bus */
- strncpy(ll_temac->mdio_busname, devinf->mdio_busname, MDIO_NAME_LEN);
- ll_temac->bus = miiphy_get_dev_by_name(ll_temac->mdio_busname);
-
- /* Looking for a valid PHY address if it is not yet set */
- if (devinf->phyaddr == -1)
- ll_temac->phyaddr = ll_temac_phy_addr(ll_temac->bus);
- else
- ll_temac->phyaddr = devinf->phyaddr;
-
- eth_register(dev);
-
- /* Try to initialize PHY here, and return */
- return ll_temac_phy_init(dev);
-}
-
-/*
- * Initialize a single ll_temac device with its mdio bus behind ll_temac
- *
- * Returns 1 if the ll_temac device and the mdio bus were initialized
- * otherwise returns 0
- */
-int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
- unsigned long ctrl_addr)
-{
- struct ll_temac_info devinf;
- struct ll_temac_mdio_info mdioinf;
- int ret;
-
- /* prepare the internal driver informations */
- devinf.flags = flags;
- devinf.base_addr = base_addr;
- devinf.ctrl_addr = ctrl_addr;
- devinf.devname = NULL;
- devinf.phyaddr = -1;
-
- mdioinf.name = devinf.mdio_busname = NULL;
- mdioinf.regs = (struct temac_reg *)devinf.base_addr;
-
- ret = xilinx_ll_temac_mdio_initialize(bis, &mdioinf);
- if (ret >= 0) {
-
- /*
- * If there was no MDIO bus name then take over the
- * new automaticaly generated by the MDIO init code.
- */
- if (mdioinf.name != devinf.mdio_busname)
- devinf.mdio_busname = mdioinf.name;
-
- ret = xilinx_ll_temac_initialize(bis, &devinf);
- if (ret > 0)
- return 1;
-
- }
-
- return 0;
-}
diff --git a/drivers/net/xilinx_ll_temac.h b/drivers/net/xilinx_ll_temac.h
deleted file mode 100644
index 56362ba20776..000000000000
--- a/drivers/net/xilinx_ll_temac.h
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Xilinx xps_ll_temac ethernet driver for u-boot
- *
- * LL_TEMAC interface
- *
- * Copyright (C) 2011 - 2012 Stephan Linz <linz at li-pro.net>
- * Copyright (C) 2008 - 2011 Michal Simek <monstr at monstr.eu>
- * Copyright (C) 2008 - 2011 PetaLogix
- *
- * Based on Yoshio Kashiwagi kashiwagi at co-nss.co.jp driver
- * Copyright (C) 2008 Nissin Systems Co.,Ltd.
- * March 2008 created
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * [0]: http://www.xilinx.com/support/documentation
- *
- * [S]: [0]/ip_documentation/xps_ll_temac.pdf
- * [A]: [0]/application_notes/xapp1041.pdf
- */
-#ifndef _XILINX_LL_TEMAC_
-#define _XILINX_LL_TEMAC_
-
-#include <config.h>
-#include <net.h>
-#include <phy.h>
-#include <miiphy.h>
-
-#include <asm/types.h>
-#include <asm/byteorder.h>
-
-#include "xilinx_ll_temac_sdma.h"
-
-#if !defined(__BIG_ENDIAN)
-# error LL_TEMAC requires big endianess
-#endif
-
-/*
- * TEMAC Memory and Register Definition
- *
- * [1]: [0]/ip_documentation/xps_ll_temac.pdf
- * page 19, Memory and Register Descriptions
- */
-struct temac_reg {
- /* direct soft registers (low part) */
- u32 raf; /* Reset and Address Filter */
- u32 tpf; /* Transmit Pause Frame */
- u32 ifgp; /* Transmit Inter Frame Gap Adjustment */
- u32 is; /* Interrupt Status */
- u32 ip; /* Interrupt Pending */
- u32 ie; /* Interrupt Enable */
- u32 ttag; /* Transmit VLAN Tag */
- u32 rtag; /* Receive VLAN Tag */
- /* hard TEMAC registers */
- u32 msw; /* Most Significant Word Data */
- u32 lsw; /* Least Significant Word Data */
- u32 ctl; /* Control */
- u32 rdy; /* Ready Status */
- /* direct soft registers (high part) */
- u32 uawl; /* Unicast Address Word Lower */
- u32 uawu; /* Unicast Address Word Upper */
- u32 tpid0; /* VLAN TPID Word 0 */
- u32 tpid1; /* VLAN TPID Word 1 */
-};
-
-/* Reset and Address Filter Registers (raf), [1] p25 */
-#define RAF_SR (1 << 13)
-#define RAF_EMFE (1 << 12)
-#define RAF_NFE (1 << 11)
-#define RAF_RVSTM_POS 9
-#define RAF_RVSTM_MASK (3 << RAF_RVSTM_POS)
-#define RAF_TVSTM_POS 7
-#define RAF_TVSTM_MASK (3 << RAF_TVSTM_POS)
-#define RAF_RVTM_POS 5
-#define RAF_RVTM_MASK (3 << RAF_RVTM_POS)
-#define RAF_TVTM_POS 3
-#define RAF_TVTM_MASK (3 << RAF_TVTM_POS)
-#define RAF_BCREJ (1 << 2)
-#define RAF_MCREJ (1 << 1)
-#define RAF_HTRST (1 << 0)
-
-/* Transmit Pause Frame Registers (tpf), [1] p28 */
-#define TPF_TPFV_POS 0
-#define TPF_TPFV_MASK (0xFFFF << TPF_TPFV_POS)
-
-/* Transmit Inter Frame Gap Adjustment Registers (ifgp), [1] p28 */
-#define IFGP_POS 0
-#define IFGP_MASK (0xFF << IFGP_POS)
-
-/* Interrupt Status, Pending, Enable Registers (is, ip, ie), [1] p29-33 */
-#define ISPE_MR (1 << 7)
-#define ISPE_RDL (1 << 6)
-#define ISPE_TC (1 << 5)
-#define ISPE_RFO (1 << 4)
-#define ISPE_RR (1 << 3)
-#define ISPE_RC (1 << 2)
-#define ISPE_AN (1 << 1)
-#define ISPE_HAC (1 << 0)
-
-/* Transmit, Receive VLAN Tag Registers (ttag, rtag), [1] p34-35 */
-#define TRTAG_TPID_POS 16
-#define TRTAG_TPID_MASK (0xFFFF << TRTAG_TPID_POS)
-#define TRTAG_PRIO_POS 13
-#define TRTAG_PRIO_MASK (7 << TRTAG_PRIO_POS)
-#define TRTAG_CFI (1 << 12)
-#define TRTAG_VID_POS 0
-#define TRTAG_VID_MASK (0xFFF << TRTAG_VID_POS)
-
-/* Most, Least Significant Word Data Register (msw, lsw), [1] p46 */
-#define MLSW_POS 0
-#define MLSW_MASK (~0UL << MLSW_POS)
-
-/* LSW Data Register for PHY addresses (lsw), [1] p66 */
-#define LSW_REGAD_POS 0
-#define LSW_REGAD_MASK (0x1F << LSW_REGAD_POS)
-#define LSW_PHYAD_POS 5
-#define LSW_PHYAD_MASK (0x1F << LSW_PHYAD_POS)
-
-/* LSW Data Register for PHY data (lsw), [1] p66 */
-#define LSW_REGDAT_POS 0
-#define LSW_REGDAT_MASK (0xFFFF << LSW_REGDAT_POS)
-
-/* Control Register (ctl), [1] p47 */
-#define CTL_WEN (1 << 15)
-#define CTL_ADDR_POS 0
-#define CTL_ADDR_MASK (0x3FF << CTL_ADDR_POS)
-
-/* Ready Status Register Ethernet (rdy), [1] p48 */
-#define RSE_HACS_RDY (1 << 14)
-#define RSE_CFG_WR (1 << 6)
-#define RSE_CFG_RR (1 << 5)
-#define RSE_AF_WR (1 << 4)
-#define RSE_AF_RR (1 << 3)
-#define RSE_MIIM_WR (1 << 2)
-#define RSE_MIIM_RR (1 << 1)
-#define RSE_FABR_RR (1 << 0)
-
-/* Unicast Address Word Lower, Upper Registers (uawl, uawu), [1] p35-36 */
-#define UAWL_UADDR_POS 0
-#define UAWL_UADDR_MASK (~0UL << UAWL_UADDR_POS)
-#define UAWU_UADDR_POS 0
-#define UAWU_UADDR_MASK (0xFFFF << UAWU_UADDR_POS)
-
-/* VLAN TPID Word 0, 1 Registers (tpid0, tpid1), [1] p37 */
-#define TPID0_V0_POS 0
-#define TPID0_V0_MASK (0xFFFF << TPID0_V0_POS)
-#define TPID0_V1_POS 16
-#define TPID0_V1_MASK (0xFFFF << TPID0_V1_POS)
-#define TPID1_V2_POS 0
-#define TPID1_V2_MASK (0xFFFF << TPID1_V2_POS)
-#define TPID1_V3_POS 16
-#define TPID1_V3_MASK (0xFFFF << TPID1_V3_POS)
-
-/*
- * TEMAC Indirectly Addressable Register Index Enumeration
- *
- * [0]: http://www.xilinx.com/support/documentation
- *
- * [1]: [0]/ip_documentation/xps_ll_temac.pdf
- * page 23, PLB Indirectly Addressable TEMAC Registers
- */
-enum temac_ctrl {
- TEMAC_RCW0 = 0x200,
- TEMAC_RCW1 = 0x240,
- TEMAC_TC = 0x280,
- TEMAC_FCC = 0x2C0,
- TEMAC_EMMC = 0x300,
- TEMAC_PHYC = 0x320,
- TEMAC_MC = 0x340,
- TEMAC_UAW0 = 0x380,
- TEMAC_UAW1 = 0x384,
- TEMAC_MAW0 = 0x388,
- TEMAC_MAW1 = 0x38C,
- TEMAC_AFM = 0x390,
- TEMAC_TIS = 0x3A0,
- TEMAC_TIE = 0x3A4,
- TEMAC_MIIMWD = 0x3B0,
- TEMAC_MIIMAI = 0x3B4
-};
-
-/* Receive Configuration Word 0, 1 Registers (RCW0, RCW1), [1] p50-51 */
-#define RCW0_PADDR_POS 0
-#define RCW0_PADDR_MASK (~0UL << RCW_PADDR_POS)
-#define RCW1_RST (1 << 31)
-#define RCW1_JUM (1 << 30)
-#define RCW1_FCS (1 << 29)
-#define RCW1_RX (1 << 28)
-#define RCW1_VLAN (1 << 27)
-#define RCW1_HD (1 << 26)
-#define RCW1_LT_DIS (1 << 25)
-#define RCW1_PADDR_POS 0
-#define RCW1_PADDR_MASK (0xFFFF << RCW_PADDR_POS)
-
-/* Transmit Configuration Registers (TC), [1] p52 */
-#define TC_RST (1 << 31)
-#define TC_JUM (1 << 30)
-#define TC_FCS (1 << 29)
-#define TC_TX (1 << 28)
-#define TC_VLAN (1 << 27)
-#define TC_HD (1 << 26)
-#define TC_IFG (1 << 25)
-
-/* Flow Control Configuration Registers (FCC), [1] p54 */
-#define FCC_FCTX (1 << 30)
-#define FCC_FCRX (1 << 29)
-
-/* Ethernet MAC Mode Configuration Registers (EMMC), [1] p54 */
-#define EMMC_LSPD_POS 30
-#define EMMC_LSPD_MASK (3 << EMMC_LSPD_POS)
-#define EMMC_LSPD_1000 (2 << EMMC_LSPD_POS)
-#define EMMC_LSPD_100 (1 << EMMC_LSPD_POS)
-#define EMMC_LSPD_10 0
-#define EMMC_RGMII (1 << 29)
-#define EMMC_SGMII (1 << 28)
-#define EMMC_GPCS (1 << 27)
-#define EMMC_HOST (1 << 26)
-#define EMMC_TX16 (1 << 25)
-#define EMMC_RX16 (1 << 24)
-
-/* RGMII/SGMII Configuration Registers (PHYC), [1] p56 */
-#define PHYC_SLSPD_POS 30
-#define PHYC_SLSPD_MASK (3 << EMMC_SLSPD_POS)
-#define PHYC_SLSPD_1000 (2 << EMMC_SLSPD_POS)
-#define PHYC_SLSPD_100 (1 << EMMC_SLSPD_POS)
-#define PHYC_SLSPD_10 0
-#define PHYC_RLSPD_POS 2
-#define PHYC_RLSPD_MASK (3 << EMMC_RLSPD_POS)
-#define PHYC_RLSPD_1000 (2 << EMMC_RLSPD_POS)
-#define PHYC_RLSPD_100 (1 << EMMC_RLSPD_POS)
-#define PHYC_RLSPD_10 0
-#define PHYC_RGMII_HD (1 << 1)
-#define PHYC_RGMII_LINK (1 << 0)
-
-/* Management Configuration Registers (MC), [1] p57 */
-#define MC_MDIOEN (1 << 6)
-#define MC_CLKDIV_POS 0
-#define MC_CLKDIV_MASK (0x3F << MC_CLKDIV_POS)
-
-/*
- * fHOSTCLK fMDC = fHOSTCLK
- * fMDC = ------------------- ---------> MC_CLKDIV = -------- - 1
- * (1 + MC_CLKDIV) * 2 2.5 MHz 5MHz
- */
-#define MC_CLKDIV(f, m) ((f / (2 * m)) - 1)
-#define MC_CLKDIV_25(f) MC_CLKDIV(f, 2500000)
-#define MC_CLKDIV_20(f) MC_CLKDIV(f, 2000000)
-#define MC_CLKDIV_15(f) MC_CLKDIV(f, 1500000)
-#define MC_CLKDIV_10(f) MC_CLKDIV(f, 1000000)
-
-/* Unicast Address Word 0, 1 Registers (UAW0, UAW1), [1] p58-59 */
-#define UAW0_UADDR_POS 0
-#define UAW0_UADDR_MASK (~0UL << UAW0_UADDR_POS)
-#define UAW1_UADDR_POS 0
-#define UAW1_UADDR_MASK (0xFFFF << UAW1_UADDR_POS)
-
-/* Multicast Address Word 0, 1 Registers (MAW0, MAW1), [1] p60 */
-#define MAW0_MADDR_POS 0
-#define MAW0_MADDR_MASK (~0UL << MAW0_MADDR_POS)
-#define MAW1_RNW (1 << 23)
-#define MAW1_MAIDX_POS 16
-#define MAW1_MAIDX_MASK (3 << MAW1_MAIDX_POS)
-#define MAW1_MADDR_POS 0
-#define MAW1_MADDR_MASK (0xFFFF << MAW1_MADDR_POS)
-
-/* Address Filter Mode Registers (AFM), [1] p63 */
-#define AFM_PM (1 << 31)
-
-/* Interrupt Status, Enable Registers (TIS, TIE), [1] p63-65 */
-#define TISE_CFG_W (1 << 6)
-#define TISE_CFG_R (1 << 5)
-#define TISE_AF_W (1 << 4)
-#define TISE_AF_R (1 << 3)
-#define TISE_MIIM_W (1 << 2)
-#define TISE_MIIM_R (1 << 1)
-#define TISE_FABR_R (1 << 0)
-
-/* MII Management Write Data Registers (MIIMWD), [1] p66 */
-#define MIIMWD_DATA_POS 0
-#define MIIMWD_DATA_MASK (0xFFFF << MIIMWD_DATA_POS)
-
-/* Ethernet interface ready status */
-int ll_temac_check_status(struct temac_reg *regs, u32 mask);
-
-/* Indirect write to ll_temac. */
-int ll_temac_indirect_set(struct temac_reg *regs, u16 regn, u32 reg_data);
-
-/* Indirect read from ll_temac. */
-int ll_temac_indirect_get(struct temac_reg *regs, u16 regn, u32* reg_data);
-
-struct ll_temac {
- phys_addr_t ctrladdr;
- phys_addr_t sdma_reg_addr[SDMA_CTRL_REGNUMS];
-
- unsigned (*in32)(phys_addr_t);
- void (*out32)(phys_addr_t, unsigned);
-
- int (*ctrlinit) (struct eth_device *);
- int (*ctrlhalt) (struct eth_device *);
- int (*ctrlreset) (struct eth_device *);
-
- int phyaddr;
- struct phy_device *phydev;
- struct mii_dev *bus;
- char mdio_busname[MDIO_NAME_LEN];
-};
-
-#endif /* _XILINX_LL_TEMAC_ */
diff --git a/drivers/net/xilinx_ll_temac_fifo.c b/drivers/net/xilinx_ll_temac_fifo.c
deleted file mode 100644
index 78319d7d918c..000000000000
--- a/drivers/net/xilinx_ll_temac_fifo.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Xilinx xps_ll_temac ethernet driver for u-boot
- *
- * FIFO sub-controller
- *
- * Copyright (C) 2011 - 2012 Stephan Linz <linz at li-pro.net>
- * Copyright (C) 2008 - 2011 Michal Simek <monstr at monstr.eu>
- * Copyright (C) 2008 - 2011 PetaLogix
- *
- * Based on Yoshio Kashiwagi kashiwagi at co-nss.co.jp driver
- * Copyright (C) 2008 Nissin Systems Co.,Ltd.
- * March 2008 created
- *
- * CREDITS: tsec driver
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * [0]: http://www.xilinx.com/support/documentation
- *
- * [F]: [0]/ip_documentation/xps_ll_fifo.pdf
- * [S]: [0]/ip_documentation/xps_ll_temac.pdf
- * [A]: [0]/application_notes/xapp1041.pdf
- */
-
-#include <config.h>
-#include <common.h>
-#include <net.h>
-
-#include <asm/types.h>
-#include <asm/io.h>
-
-#include "xilinx_ll_temac.h"
-#include "xilinx_ll_temac_fifo.h"
-
-int ll_temac_reset_fifo(struct eth_device *dev)
-{
- struct ll_temac *ll_temac = dev->priv;
- struct fifo_ctrl *fifo_ctrl = (void *)ll_temac->ctrladdr;
-
- out_be32(&fifo_ctrl->tdfr, LL_FIFO_TDFR_KEY);
- out_be32(&fifo_ctrl->rdfr, LL_FIFO_RDFR_KEY);
- out_be32(&fifo_ctrl->isr, ~0UL);
- out_be32(&fifo_ctrl->ier, 0);
-
- return 0;
-}
-
-int ll_temac_recv_fifo(struct eth_device *dev)
-{
- int i, length = 0;
- u32 *buf = (u32 *)net_rx_packets[0];
- struct ll_temac *ll_temac = dev->priv;
- struct fifo_ctrl *fifo_ctrl = (void *)ll_temac->ctrladdr;
-
- if (in_be32(&fifo_ctrl->isr) & LL_FIFO_ISR_RC) {
-
- /* reset isr */
- out_be32(&fifo_ctrl->isr, ~0UL);
-
- /*
- * MAYBE here:
- * while (fifo_ctrl->isr);
- */
-
- /*
- * The length is written (into RLR) by the XPS LL FIFO
- * when the packet is received across the RX LocalLink
- * interface and the receive data FIFO had enough
- * locations that all of the packet data has been saved.
- * The RLR should only be read when a receive packet is
- * available for processing (the receive occupancy is
- * not zero). Once the RLR is read, the receive packet
- * data should be read from the receive data FIFO before
- * the RLR is read again.
- *
- * [F] page 17, Receive Length Register (RLR)
- */
- if (in_be32(&fifo_ctrl->rdfo) & LL_FIFO_RDFO_MASK) {
- length = in_be32(&fifo_ctrl->rlf) & LL_FIFO_RLF_MASK;
- } else {
- printf("%s: Got error, no receive occupancy\n",
- __func__);
- return -1;
- }
-
- if (length > PKTSIZE_ALIGN) {
- printf("%s: Got error, receive package too big (%i)\n",
- __func__, length);
- ll_temac_reset_fifo(dev);
- return -1;
- }
-
- for (i = 0; i < length; i += 4)
- *buf++ = in_be32(&fifo_ctrl->rdfd);
-
- net_process_received_packet(net_rx_packets[0], length);
- }
-
- return 0;
-}
-
-int ll_temac_send_fifo(struct eth_device *dev, void *packet, int length)
-{
- int i;
- u32 *buf = (u32 *)packet;
- struct ll_temac *ll_temac = dev->priv;
- struct fifo_ctrl *fifo_ctrl = (void *)ll_temac->ctrladdr;
-
- if (length < LL_FIFO_TLF_MIN) {
- printf("%s: Got error, transmit package too small (%i)\n",
- __func__, length);
- return -1;
- }
-
- if (length > LL_FIFO_TLF_MAX) {
- printf("%s: Got error, transmit package too big (%i)\n",
- __func__, length);
- return -1;
- }
-
- for (i = 0; i < length; i += 4)
- out_be32(&fifo_ctrl->tdfd, *buf++);
-
- /*
- * Once the packet length is written to the TLR it is
- * automatically moved to the transmit data FIFO with
- * the packet data freeing up the TLR for another value.
- * The packet length must be written to the TLR after
- * the packet data is written to the transmit data FIFO.
- * It is not valid to write data for multiple packets
- * to the transmit data FIFO before writing the packet
- * length values.
- *
- * [F] page 17, Transmit Length Register (TLR)
- */
- out_be32(&fifo_ctrl->tlf, length);
-
- return 0;
-}
diff --git a/drivers/net/xilinx_ll_temac_fifo.h b/drivers/net/xilinx_ll_temac_fifo.h
deleted file mode 100644
index c1bf7cc641bc..000000000000
--- a/drivers/net/xilinx_ll_temac_fifo.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Xilinx xps_ll_temac ethernet driver for u-boot
- *
- * FIFO sub-controller interface
- *
- * Copyright (C) 2011 - 2012 Stephan Linz <linz at li-pro.net>
- * Copyright (C) 2008 - 2011 Michal Simek <monstr at monstr.eu>
- * Copyright (C) 2008 - 2011 PetaLogix
- *
- * Based on Yoshio Kashiwagi kashiwagi at co-nss.co.jp driver
- * Copyright (C) 2008 Nissin Systems Co.,Ltd.
- * March 2008 created
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * [0]: http://www.xilinx.com/support/documentation
- *
- * [S]: [0]/ip_documentation/xps_ll_temac.pdf
- * [A]: [0]/application_notes/xapp1041.pdf
- */
-#ifndef _XILINX_LL_TEMAC_FIFO_
-#define _XILINX_LL_TEMAC_FIFO_
-
-#include <net.h>
-
-#include <asm/types.h>
-#include <asm/byteorder.h>
-
-#if !defined(__BIG_ENDIAN)
-# error LL_TEMAC requires big endianess
-#endif
-
-/*
- * FIFO Register Definition
- *
- * Used for memory mapped access from and to (Rd/Td) the LocalLink (LL)
- * Tri-Mode Ether MAC (TEMAC) via the 2 kb full duplex FIFO Controller,
- * one for each.
- *
- * [1]: [0]/ip_documentation/xps_ll_fifo.pdf
- * page 10, Registers Definition
- */
-struct fifo_ctrl {
- u32 isr; /* Interrupt Status Register (RW) */
- u32 ier; /* Interrupt Enable Register (RW) */
- u32 tdfr; /* Transmit Data FIFO Reset (WO) */
- u32 tdfv; /* Transmit Data FIFO Vacancy (RO) */
- u32 tdfd; /* Transmit Data FIFO 32bit wide Data write port (WO) */
- u32 tlf; /* Transmit Length FIFO (WO) */
- u32 rdfr; /* Receive Data FIFO Reset (WO) */
- u32 rdfo; /* Receive Data FIFO Occupancy (RO) */
- u32 rdfd; /* Receive Data FIFO 32bit wide Data read port (RO) */
- u32 rlf; /* Receive Length FIFO (RO) */
- u32 llr; /* LocalLink Reset (WO) */
-};
-
-/* Interrupt Status Register (ISR), [1] p11 */
-#define LL_FIFO_ISR_RPURE (1 << 31) /* Receive Packet Underrun Read Err */
-#define LL_FIFO_ISR_RPORE (1 << 30) /* Receive Packet Overrun Read Err */
-#define LL_FIFO_ISR_RPUE (1 << 29) /* Receive Packet Underrun Error */
-#define LL_FIFO_ISR_TPOE (1 << 28) /* Transmit Packet Overrun Error */
-#define LL_FIFO_ISR_TC (1 << 27) /* Transmit Complete */
-#define LL_FIFO_ISR_RC (1 << 26) /* Receive Complete */
-#define LL_FIFO_ISR_TSE (1 << 25) /* Transmit Size Error */
-#define LL_FIFO_ISR_TRC (1 << 24) /* Transmit Reset Complete */
-#define LL_FIFO_ISR_RRC (1 << 23) /* Receive Reset Complete */
-
-/* Interrupt Enable Register (IER), [1] p12/p13 */
-#define LL_FIFO_IER_RPURE (1 << 31) /* Receive Packet Underrun Read Err */
-#define LL_FIFO_IER_RPORE (1 << 30) /* Receive Packet Overrun Read Err */
-#define LL_FIFO_IER_RPUE (1 << 29) /* Receive Packet Underrun Error */
-#define LL_FIFO_IER_TPOE (1 << 28) /* Transmit Packet Overrun Error */
-#define LL_FIFO_IER_TC (1 << 27) /* Transmit Complete */
-#define LL_FIFO_IER_RC (1 << 26) /* Receive Complete */
-#define LL_FIFO_IER_TSE (1 << 25) /* Transmit Size Error */
-#define LL_FIFO_IER_TRC (1 << 24) /* Transmit Reset Complete */
-#define LL_FIFO_IER_RRC (1 << 23) /* Receive Reset Complete */
-
-/* Transmit Data FIFO Reset (TDFR), [1] p13/p14 */
-#define LL_FIFO_TDFR_KEY 0x000000A5UL
-
-/* Transmit Data FIFO Vacancy (TDFV), [1] p14 */
-#define LL_FIFO_TDFV_POS 0
-#define LL_FIFO_TDFV_MASK (0x000001FFUL << LL_FIFO_TDFV_POS)
-
-/* Transmit Length FIFO (TLF), [1] p16/p17 */
-#define LL_FIFO_TLF_POS 0
-#define LL_FIFO_TLF_MASK (0x000007FFUL << LL_FIFO_TLF_POS)
-#define LL_FIFO_TLF_MIN ((4 * sizeof(u32)) & LL_FIFO_TLF_MASK)
-#define LL_FIFO_TLF_MAX ((510 * sizeof(u32)) & LL_FIFO_TLF_MASK)
-
-/* Receive Data FIFO Reset (RDFR), [1] p15 */
-#define LL_FIFO_RDFR_KEY 0x000000A5UL
-
-/* Receive Data FIFO Occupancy (RDFO), [1] p16 */
-#define LL_FIFO_RDFO_POS 0
-#define LL_FIFO_RDFO_MASK (0x000001FFUL << LL_FIFO_RDFO_POS)
-
-/* Receive Length FIFO (RLF), [1] p17/p18 */
-#define LL_FIFO_RLF_POS 0
-#define LL_FIFO_RLF_MASK (0x000007FFUL << LL_FIFO_RLF_POS)
-#define LL_FIFO_RLF_MIN ((4 * sizeof(uint32)) & LL_FIFO_RLF_MASK)
-#define LL_FIFO_RLF_MAX ((510 * sizeof(uint32)) & LL_FIFO_RLF_MASK)
-
-/* LocalLink Reset (LLR), [1] p18 */
-#define LL_FIFO_LLR_KEY 0x000000A5UL
-
-
-/* reset FIFO and IRQ, disable interrupts */
-int ll_temac_reset_fifo(struct eth_device *dev);
-
-/* receive buffered data from FIFO (polling ISR) */
-int ll_temac_recv_fifo(struct eth_device *dev);
-
-/* send buffered data to FIFO */
-int ll_temac_send_fifo(struct eth_device *dev, void *packet, int length);
-
-#endif /* _XILINX_LL_TEMAC_FIFO_ */
diff --git a/drivers/net/xilinx_ll_temac_mdio.c b/drivers/net/xilinx_ll_temac_mdio.c
deleted file mode 100644
index b7bab794e570..000000000000
--- a/drivers/net/xilinx_ll_temac_mdio.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Xilinx xps_ll_temac ethernet driver for u-boot
- *
- * MDIO bus access
- *
- * Copyright (C) 2011 - 2012 Stephan Linz <linz at li-pro.net>
- * Copyright (C) 2008 - 2011 Michal Simek <monstr at monstr.eu>
- * Copyright (C) 2008 - 2011 PetaLogix
- *
- * Based on Yoshio Kashiwagi kashiwagi at co-nss.co.jp driver
- * Copyright (C) 2008 Nissin Systems Co.,Ltd.
- * March 2008 created
- *
- * CREDITS: tsec driver
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * [0]: http://www.xilinx.com/support/documentation
- *
- * [S]: [0]/ip_documentation/xps_ll_temac.pdf
- * [A]: [0]/application_notes/xapp1041.pdf
- */
-
-#include <config.h>
-#include <common.h>
-#include <miiphy.h>
-#include <phy.h>
-#include <malloc.h>
-#include <asm/io.h>
-
-#include "xilinx_ll_temac.h"
-#include "xilinx_ll_temac_mdio.h"
-
-#if !defined(CONFIG_MII)
-# error "LL_TEMAC requires MII -- missing CONFIG_MII"
-#endif
-
-#if !defined(CONFIG_PHYLIB)
-# error "LL_TEMAC requires PHYLIB -- missing CONFIG_PHYLIB"
-#endif
-
-/*
- * Prior to PHY access, the MDIO clock must be setup. This driver will set a
- * safe default that should work with PLB bus speeds of up to 150 MHz and keep
- * the MDIO clock below 2.5 MHz. If the user wishes faster access to the PHY
- * then the clock divisor can be set to a different value by setting the
- * correct bus speed value with CONFIG_XILINX_LL_TEMAC_CLK.
- */
-#if !defined(CONFIG_XILINX_LL_TEMAC_CLK)
-#define MDIO_CLOCK_DIV MC_CLKDIV_10(150000000)
-#else
-#define MDIO_CLOCK_DIV MC_CLKDIV_25(CONFIG_XILINX_LL_TEMAC_CLK)
-#endif
-
-static int ll_temac_mdio_setup(struct mii_dev *bus)
-{
- struct temac_reg *regs = (struct temac_reg *)bus->priv;
-
- /* setup MDIO clock */
- ll_temac_indirect_set(regs, TEMAC_MC,
- MC_MDIOEN | (MDIO_CLOCK_DIV & MC_CLKDIV_MASK));
-
- return 0;
-}
-
-/*
- * Indirect MII PHY read via ll_temac.
- *
- * http://www.xilinx.com/support/documentation/ip_documentation/xps_ll_temac.pdf
- * page 67, Using the MII Management to Access PHY Registers
- */
-int ll_temac_local_mdio_read(struct temac_reg *regs, int addr, int devad,
- int regnum)
-{
- out_be32(®s->lsw,
- ((addr << LSW_PHYAD_POS) & LSW_PHYAD_MASK) |
- (regnum & LSW_REGAD_MASK));
- out_be32(®s->ctl, TEMAC_MIIMAI);
-
- ll_temac_check_status(regs, RSE_MIIM_RR);
-
- return in_be32(®s->lsw) & LSW_REGDAT_MASK;
-}
-
-/*
- * Indirect MII PHY write via ll_temac.
- *
- * http://www.xilinx.com/support/documentation/ip_documentation/xps_ll_temac.pdf
- * page 67, Using the MII Management to Access PHY Registers
- */
-void ll_temac_local_mdio_write(struct temac_reg *regs, int addr, int devad,
- int regnum, u16 value)
-{
- out_be32(®s->lsw, (value & LSW_REGDAT_MASK));
- out_be32(®s->ctl, CTL_WEN | TEMAC_MIIMWD);
-
- out_be32(®s->lsw,
- ((addr << LSW_PHYAD_POS) & LSW_PHYAD_MASK) |
- (regnum & LSW_REGAD_MASK));
- out_be32(®s->ctl, CTL_WEN | TEMAC_MIIMAI);
-
- ll_temac_check_status(regs, RSE_MIIM_WR);
-}
-
-int ll_temac_phy_read(struct mii_dev *bus, int addr, int devad, int regnum)
-{
- struct temac_reg *regs = (struct temac_reg *)bus->priv;
-
- return ll_temac_local_mdio_read(regs, addr, devad, regnum);
-}
-
-int ll_temac_phy_write(struct mii_dev *bus, int addr, int devad, int regnum,
- u16 value)
-{
- struct temac_reg *regs = (struct temac_reg *)bus->priv;
-
- ll_temac_local_mdio_write(regs, addr, devad, regnum, value);
-
- return 0;
-}
-
-/*
- * Use MII register 1 (MII status register) to detect PHY
- *
- * A Mask used to verify certain PHY features (register content)
- * in the PHY detection register:
- * Auto-negotiation support, 10Mbps half/full duplex support
- */
-#define PHY_DETECT_REG MII_BMSR
-#define PHY_DETECT_MASK (BMSR_10FULL | BMSR_10HALF | BMSR_ANEGCAPABLE)
-
-/* Looking for a valid PHY address */
-int ll_temac_phy_addr(struct mii_dev *bus)
-{
- struct temac_reg *regs = (struct temac_reg *)bus->priv;
- unsigned short val;
- unsigned int phy;
-
- for (phy = PHY_MAX_ADDR; phy >= 0; phy--) {
- val = ll_temac_local_mdio_read(regs, phy, 0, PHY_DETECT_REG);
- if ((val != 0xFFFF) &&
- ((val & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
- /* Found a valid PHY address */
- return phy;
- }
- }
-
- return -1;
-}
-
-int xilinx_ll_temac_mdio_initialize(bd_t *bis, struct ll_temac_mdio_info *info)
-{
- struct mii_dev *bus = mdio_alloc();
-
- if (!bus) {
- printf("Failed to allocate LL_TEMAC MDIO bus: %s\n",
- info->name);
- return -1;
- }
-
- bus->read = ll_temac_phy_read;
- bus->write = ll_temac_phy_write;
- bus->reset = NULL;
-
- /* use given name or generate its own unique name */
- if (info->name) {
- strncpy(bus->name, info->name, MDIO_NAME_LEN);
- } else {
- snprintf(bus->name, MDIO_NAME_LEN, "lltemii.%p", info->regs);
- info->name = bus->name;
- }
-
- bus->priv = info->regs;
-
- ll_temac_mdio_setup(bus);
- return mdio_register(bus);
-}
diff --git a/drivers/net/xilinx_ll_temac_mdio.h b/drivers/net/xilinx_ll_temac_mdio.h
deleted file mode 100644
index 0603c64457f3..000000000000
--- a/drivers/net/xilinx_ll_temac_mdio.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Xilinx xps_ll_temac ethernet driver for u-boot
- *
- * MDIO bus access interface
- *
- * Copyright (C) 2011 - 2012 Stephan Linz <linz at li-pro.net>
- * Copyright (C) 2008 - 2011 Michal Simek <monstr at monstr.eu>
- * Copyright (C) 2008 - 2011 PetaLogix
- *
- * Based on Yoshio Kashiwagi kashiwagi at co-nss.co.jp driver
- * Copyright (C) 2008 Nissin Systems Co.,Ltd.
- * March 2008 created
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * [0]: http://www.xilinx.com/support/documentation
- *
- * [S]: [0]/ip_documentation/xps_ll_temac.pdf
- * [A]: [0]/application_notes/xapp1041.pdf
- */
-#ifndef _XILINX_LL_TEMAC_MDIO_
-#define _XILINX_LL_TEMAC_MDIO_
-
-#include <net.h>
-#include <miiphy.h>
-
-#include <asm/types.h>
-#include <asm/byteorder.h>
-
-#include "xilinx_ll_temac.h"
-
-int ll_temac_local_mdio_read(struct temac_reg *regs, int addr, int devad,
- int regnum);
-void ll_temac_local_mdio_write(struct temac_reg *regs, int addr, int devad,
- int regnum, u16 value);
-
-int ll_temac_phy_read(struct mii_dev *bus, int addr, int devad, int regnum);
-int ll_temac_phy_write(struct mii_dev *bus, int addr, int devad, int regnum,
- u16 value);
-
-int ll_temac_phy_addr(struct mii_dev *bus);
-
-struct ll_temac_mdio_info {
- struct temac_reg *regs;
- char *name;
-};
-
-int xilinx_ll_temac_mdio_initialize(bd_t *bis, struct ll_temac_mdio_info *info);
-
-#endif /* _XILINX_LL_TEMAC_MDIO_ */
diff --git a/drivers/net/xilinx_ll_temac_sdma.c b/drivers/net/xilinx_ll_temac_sdma.c
deleted file mode 100644
index 8176f7b4bc34..000000000000
--- a/drivers/net/xilinx_ll_temac_sdma.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Xilinx xps_ll_temac ethernet driver for u-boot
- *
- * SDMA sub-controller
- *
- * Copyright (C) 2011 - 2012 Stephan Linz <linz at li-pro.net>
- * Copyright (C) 2008 - 2011 Michal Simek <monstr at monstr.eu>
- * Copyright (C) 2008 - 2011 PetaLogix
- *
- * Based on Yoshio Kashiwagi kashiwagi at co-nss.co.jp driver
- * Copyright (C) 2008 Nissin Systems Co.,Ltd.
- * March 2008 created
- *
- * CREDITS: tsec driver
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * [0]: http://www.xilinx.com/support/documentation
- *
- * [M]: [0]/ip_documentation/mpmc.pdf
- * [S]: [0]/ip_documentation/xps_ll_temac.pdf
- * [A]: [0]/application_notes/xapp1041.pdf
- */
-
-#include <config.h>
-#include <common.h>
-#include <net.h>
-
-#include <asm/types.h>
-#include <asm/io.h>
-
-#include "xilinx_ll_temac.h"
-#include "xilinx_ll_temac_sdma.h"
-
-#define TX_BUF_CNT 2
-
-static unsigned int rx_idx; /* index of the current RX buffer */
-static unsigned int tx_idx; /* index of the current TX buffer */
-
-struct rtx_cdmac_bd {
- struct cdmac_bd rx[PKTBUFSRX];
- struct cdmac_bd tx[TX_BUF_CNT];
-};
-
-/*
- * DMA Buffer Descriptor alignment
- *
- * If the address contained in the Next Descriptor Pointer register is not
- * 8-word aligned or reaches beyond the range of available memory, the SDMA
- * halts processing and sets the CDMAC_BD_STCTRL_ERROR bit in the respective
- * status register (tx_chnl_sts or rx_chnl_sts).
- *
- * [1]: [0]/ip_documentation/mpmc.pdf
- * page 161, Next Descriptor Pointer
- */
-static struct rtx_cdmac_bd cdmac_bd __aligned(32);
-
-/* Xilinx Processor Local Bus (PLB) in/out accessors */
-inline unsigned ll_temac_xlplb_in32(phys_addr_t addr)
-{
- return in_be32((void *)addr);
-}
-inline void ll_temac_xlplb_out32(phys_addr_t addr, unsigned value)
-{
- out_be32((void *)addr, value);
-}
-
-/* collect all register addresses for Xilinx PLB in/out accessors */
-void ll_temac_collect_xlplb_sdma_reg_addr(struct eth_device *dev)
-{
- struct ll_temac *ll_temac = dev->priv;
- struct sdma_ctrl *sdma_ctrl = (void *)ll_temac->ctrladdr;
- phys_addr_t *ra = ll_temac->sdma_reg_addr;
-
- ra[TX_NXTDESC_PTR] = (phys_addr_t)&sdma_ctrl->tx_nxtdesc_ptr;
- ra[TX_CURBUF_ADDR] = (phys_addr_t)&sdma_ctrl->tx_curbuf_addr;
- ra[TX_CURBUF_LENGTH] = (phys_addr_t)&sdma_ctrl->tx_curbuf_length;
- ra[TX_CURDESC_PTR] = (phys_addr_t)&sdma_ctrl->tx_curdesc_ptr;
- ra[TX_TAILDESC_PTR] = (phys_addr_t)&sdma_ctrl->tx_taildesc_ptr;
- ra[TX_CHNL_CTRL] = (phys_addr_t)&sdma_ctrl->tx_chnl_ctrl;
- ra[TX_IRQ_REG] = (phys_addr_t)&sdma_ctrl->tx_irq_reg;
- ra[TX_CHNL_STS] = (phys_addr_t)&sdma_ctrl->tx_chnl_sts;
- ra[RX_NXTDESC_PTR] = (phys_addr_t)&sdma_ctrl->rx_nxtdesc_ptr;
- ra[RX_CURBUF_ADDR] = (phys_addr_t)&sdma_ctrl->rx_curbuf_addr;
- ra[RX_CURBUF_LENGTH] = (phys_addr_t)&sdma_ctrl->rx_curbuf_length;
- ra[RX_CURDESC_PTR] = (phys_addr_t)&sdma_ctrl->rx_curdesc_ptr;
- ra[RX_TAILDESC_PTR] = (phys_addr_t)&sdma_ctrl->rx_taildesc_ptr;
- ra[RX_CHNL_CTRL] = (phys_addr_t)&sdma_ctrl->rx_chnl_ctrl;
- ra[RX_IRQ_REG] = (phys_addr_t)&sdma_ctrl->rx_irq_reg;
- ra[RX_CHNL_STS] = (phys_addr_t)&sdma_ctrl->rx_chnl_sts;
- ra[DMA_CONTROL_REG] = (phys_addr_t)&sdma_ctrl->dma_control_reg;
-}
-
-/* Check for TX and RX channel errors. */
-static inline int ll_temac_sdma_error(struct eth_device *dev)
-{
- int err;
- struct ll_temac *ll_temac = dev->priv;
- phys_addr_t *ra = ll_temac->sdma_reg_addr;
-
- err = ll_temac->in32(ra[TX_CHNL_STS]) & CHNL_STS_ERROR;
- err |= ll_temac->in32(ra[RX_CHNL_STS]) & CHNL_STS_ERROR;
-
- return err;
-}
-
-int ll_temac_init_sdma(struct eth_device *dev)
-{
- struct ll_temac *ll_temac = dev->priv;
- struct cdmac_bd *rx_dp;
- struct cdmac_bd *tx_dp;
- phys_addr_t *ra = ll_temac->sdma_reg_addr;
- int i;
-
- printf("%s: SDMA: %d Rx buffers, %d Tx buffers\n",
- dev->name, PKTBUFSRX, TX_BUF_CNT);
-
- /* Initialize the Rx Buffer descriptors */
- for (i = 0; i < PKTBUFSRX; i++) {
- rx_dp = &cdmac_bd.rx[i];
- memset(rx_dp, 0, sizeof(*rx_dp));
- rx_dp->next_p = rx_dp;
- rx_dp->buf_len = PKTSIZE_ALIGN;
- rx_dp->phys_buf_p = (u8 *)net_rx_packets[i];
- flush_cache((u32)rx_dp->phys_buf_p, PKTSIZE_ALIGN);
- }
- flush_cache((u32)cdmac_bd.rx, sizeof(cdmac_bd.rx));
-
- /* Initialize the TX Buffer Descriptors */
- for (i = 0; i < TX_BUF_CNT; i++) {
- tx_dp = &cdmac_bd.tx[i];
- memset(tx_dp, 0, sizeof(*tx_dp));
- tx_dp->next_p = tx_dp;
- }
- flush_cache((u32)cdmac_bd.tx, sizeof(cdmac_bd.tx));
-
- /* Reset index counter to the Rx and Tx Buffer descriptors */
- rx_idx = tx_idx = 0;
-
- /* initial Rx DMA start by writing to respective TAILDESC_PTR */
- ll_temac->out32(ra[RX_CURDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
- ll_temac->out32(ra[RX_TAILDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
-
- return 0;
-}
-
-int ll_temac_halt_sdma(struct eth_device *dev)
-{
- unsigned timeout = 50; /* 1usec * 50 = 50usec */
- struct ll_temac *ll_temac = dev->priv;
- phys_addr_t *ra = ll_temac->sdma_reg_addr;
-
- /*
- * Soft reset the DMA
- *
- * Quote from MPMC documentation: Writing a 1 to this field
- * forces the DMA engine to shutdown and reset itself. After
- * setting this bit, software must poll it until the bit is
- * cleared by the DMA. This indicates that the reset process
- * is done and the pipeline has been flushed.
- */
- ll_temac->out32(ra[DMA_CONTROL_REG], DMA_CONTROL_RESET);
- while (timeout && (ll_temac->in32(ra[DMA_CONTROL_REG])
- & DMA_CONTROL_RESET)) {
- timeout--;
- udelay(1);
- }
-
- if (!timeout) {
- printf("%s: Timeout\n", __func__);
- return -1;
- }
-
- return 0;
-}
-
-int ll_temac_reset_sdma(struct eth_device *dev)
-{
- u32 r;
- struct ll_temac *ll_temac = dev->priv;
- phys_addr_t *ra = ll_temac->sdma_reg_addr;
-
- /* Soft reset the DMA. */
- if (ll_temac_halt_sdma(dev))
- return -1;
-
- /* Now clear the interrupts. */
- r = ll_temac->in32(ra[TX_CHNL_CTRL]);
- r &= ~CHNL_CTRL_IRQ_MASK;
- ll_temac->out32(ra[TX_CHNL_CTRL], r);
-
- r = ll_temac->in32(ra[RX_CHNL_CTRL]);
- r &= ~CHNL_CTRL_IRQ_MASK;
- ll_temac->out32(ra[RX_CHNL_CTRL], r);
-
- /* Now ACK pending IRQs. */
- ll_temac->out32(ra[TX_IRQ_REG], IRQ_REG_IRQ_MASK);
- ll_temac->out32(ra[RX_IRQ_REG], IRQ_REG_IRQ_MASK);
-
- /* Set tail-ptr mode, disable errors for both channels. */
- ll_temac->out32(ra[DMA_CONTROL_REG],
- /* Enable use of tail pointer register */
- DMA_CONTROL_TPE |
- /* Disable error when 2 or 4 bit coalesce cnt overfl */
- DMA_CONTROL_RXOCEID |
- /* Disable error when 2 or 4 bit coalesce cnt overfl */
- DMA_CONTROL_TXOCEID);
-
- return 0;
-}
-
-int ll_temac_recv_sdma(struct eth_device *dev)
-{
- int length, pb_idx;
- struct cdmac_bd *rx_dp = &cdmac_bd.rx[rx_idx];
- struct ll_temac *ll_temac = dev->priv;
- phys_addr_t *ra = ll_temac->sdma_reg_addr;
-
- if (ll_temac_sdma_error(dev)) {
-
- if (ll_temac_reset_sdma(dev))
- return -1;
-
- ll_temac_init_sdma(dev);
- }
-
- flush_cache((u32)rx_dp, sizeof(*rx_dp));
-
- if (!(rx_dp->sca.stctrl & CDMAC_BD_STCTRL_COMPLETED))
- return 0;
-
- if (rx_dp->sca.stctrl & (CDMAC_BD_STCTRL_SOP | CDMAC_BD_STCTRL_EOP)) {
- pb_idx = rx_idx;
- length = rx_dp->sca.app[4] & CDMAC_BD_APP4_RXBYTECNT_MASK;
- } else {
- pb_idx = -1;
- length = 0;
- printf("%s: Got part of package, unsupported (%x)\n",
- __func__, rx_dp->sca.stctrl);
- }
-
- /* flip the buffer */
- flush_cache((u32)rx_dp->phys_buf_p, length);
-
- /* reset the current descriptor */
- rx_dp->sca.stctrl = 0;
- rx_dp->sca.app[4] = 0;
- flush_cache((u32)rx_dp, sizeof(*rx_dp));
-
- /* Find next empty buffer descriptor, preparation for next iteration */
- rx_idx = (rx_idx + 1) % PKTBUFSRX;
- rx_dp = &cdmac_bd.rx[rx_idx];
- flush_cache((u32)rx_dp, sizeof(*rx_dp));
-
- /* DMA start by writing to respective TAILDESC_PTR */
- ll_temac->out32(ra[RX_CURDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
- ll_temac->out32(ra[RX_TAILDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
-
- if (length > 0 && pb_idx != -1)
- net_process_received_packet(net_rx_packets[pb_idx], length);
-
- return 0;
-}
-
-int ll_temac_send_sdma(struct eth_device *dev, void *packet, int length)
-{
- unsigned timeout = 50; /* 1usec * 50 = 50usec */
- struct cdmac_bd *tx_dp = &cdmac_bd.tx[tx_idx];
- struct ll_temac *ll_temac = dev->priv;
- phys_addr_t *ra = ll_temac->sdma_reg_addr;
-
- if (ll_temac_sdma_error(dev)) {
-
- if (ll_temac_reset_sdma(dev))
- return -1;
-
- ll_temac_init_sdma(dev);
- }
-
- tx_dp->phys_buf_p = (u8 *)packet;
- tx_dp->buf_len = length;
- tx_dp->sca.stctrl = CDMAC_BD_STCTRL_SOP | CDMAC_BD_STCTRL_EOP |
- CDMAC_BD_STCTRL_STOP_ON_END;
-
- flush_cache((u32)packet, length);
- flush_cache((u32)tx_dp, sizeof(*tx_dp));
-
- /* DMA start by writing to respective TAILDESC_PTR */
- ll_temac->out32(ra[TX_CURDESC_PTR], (int)tx_dp);
- ll_temac->out32(ra[TX_TAILDESC_PTR], (int)tx_dp);
-
- /* Find next empty buffer descriptor, preparation for next iteration */
- tx_idx = (tx_idx + 1) % TX_BUF_CNT;
- tx_dp = &cdmac_bd.tx[tx_idx];
-
- do {
- flush_cache((u32)tx_dp, sizeof(*tx_dp));
- udelay(1);
- } while (timeout-- && !(tx_dp->sca.stctrl & CDMAC_BD_STCTRL_COMPLETED));
-
- if (!timeout) {
- printf("%s: Timeout\n", __func__);
- return -1;
- }
-
- return 0;
-}
diff --git a/drivers/net/xilinx_ll_temac_sdma.h b/drivers/net/xilinx_ll_temac_sdma.h
deleted file mode 100644
index 67a8b0f2ef04..000000000000
--- a/drivers/net/xilinx_ll_temac_sdma.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Xilinx xps_ll_temac ethernet driver for u-boot
- *
- * SDMA sub-controller interface
- *
- * Copyright (C) 2011 - 2012 Stephan Linz <linz at li-pro.net>
- * Copyright (C) 2008 - 2011 Michal Simek <monstr at monstr.eu>
- * Copyright (C) 2008 - 2011 PetaLogix
- *
- * Based on Yoshio Kashiwagi kashiwagi at co-nss.co.jp driver
- * Copyright (C) 2008 Nissin Systems Co.,Ltd.
- * March 2008 created
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * [0]: http://www.xilinx.com/support/documentation
- *
- * [S]: [0]/ip_documentation/xps_ll_temac.pdf
- * [A]: [0]/application_notes/xapp1041.pdf
- */
-#ifndef _XILINX_LL_TEMAC_SDMA_
-#define _XILINX_LL_TEMAC_SDMA_
-
-#include <net.h>
-
-#include <asm/types.h>
-#include <asm/byteorder.h>
-
-#include <linux/compiler.h>
-
-#if !defined(__BIG_ENDIAN)
-# error LL_TEMAC requires big endianess
-#endif
-
-/*
- * DMA Buffer Descriptor for CDMAC
- *
- * Used for data connection from and to (Rx/Tx) the LocalLink (LL) TEMAC via
- * the Communications Direct Memory Access Controller (CDMAC) -- one for each.
- *
- * overview:
- * ftp://ftp.xilinx.com/pub/documentation/misc/mpmc_getting_started.pdf
- *
- * [1]: [0]/ip_documentation/mpmc.pdf
- * page 140, DMA Operation Descriptors
- *
- * [2]: [0]/user_guides/ug200.pdf
- * page 229, DMA Controller -- Descriptor Format
- *
- * [3]: [0]/ip_documentation/xps_ll_temac.pdf
- * page 72, Transmit LocalLink Frame Format
- * page 73, Receive LocalLink Frame Format
- */
-struct cdmac_bd {
- struct cdmac_bd *next_p; /* Next Descriptor Pointer */
- u8 *phys_buf_p; /* Buffer Address */
- u32 buf_len; /* Buffer Length */
- union {
- u8 stctrl; /* Status/Control the DMA transfer */
- u32 app[5]; /* application specific data */
- } __packed __aligned(1) sca;
-};
-
-/* CDMAC Descriptor Status and Control (stctrl), [1] p140, [2] p230 */
-#define CDMAC_BD_STCTRL_ERROR (1 << 7)
-#define CDMAC_BD_STCTRL_IRQ_ON_END (1 << 6)
-#define CDMAC_BD_STCTRL_STOP_ON_END (1 << 5)
-#define CDMAC_BD_STCTRL_COMPLETED (1 << 4)
-#define CDMAC_BD_STCTRL_SOP (1 << 3)
-#define CDMAC_BD_STCTRL_EOP (1 << 2)
-#define CDMAC_BD_STCTRL_DMACHBUSY (1 << 1)
-
-/* CDMAC Descriptor APP0: Transmit LocalLink Footer Word 3, [3] p72 */
-#define CDMAC_BD_APP0_TXCSCNTRL (1 << 0)
-
-/* CDMAC Descriptor APP1: Transmit LocalLink Footer Word 4, [3] p73 */
-#define CDMAC_BD_APP1_TXCSBEGIN_POS 16
-#define CDMAC_BD_APP1_TXCSBEGIN_MASK (0xFFFF << CDMAC_BD_APP1_TXCSBEGIN_POS)
-#define CDMAC_BD_APP1_TXCSINSERT_POS 0
-#define CDMAC_BD_APP1_TXCSINSERT_MASK (0xFFFF << CDMAC_BD_APP1_TXCSINSERT_POS)
-
-/* CDMAC Descriptor APP2: Transmit LocalLink Footer Word 5, [3] p73 */
-#define CDMAC_BD_APP2_TXCSINIT_POS 0
-#define CDMAC_BD_APP2_TXCSINIT_MASK (0xFFFF << CDMAC_BD_APP2_TXCSINIT_POS)
-
-/* CDMAC Descriptor APP0: Receive LocalLink Footer Word 3, [3] p73 */
-#define CDMAC_BD_APP0_MADDRU_POS 0
-#define CDMAC_BD_APP0_MADDRU_MASK (0xFFFF << CDMAC_BD_APP0_MADDRU_POS)
-
-/* CDMAC Descriptor APP1: Receive LocalLink Footer Word 4, [3] p74 */
-#define CDMAC_BD_APP1_MADDRL_POS 0
-#define CDMAC_BD_APP1_MADDRL_MASK (~0UL << CDMAC_BD_APP1_MADDRL_POS)
-
-/* CDMAC Descriptor APP2: Receive LocalLink Footer Word 5, [3] p74 */
-#define CDMAC_BD_APP2_BCAST_FRAME (1 << 2)
-#define CDMAC_BD_APP2_IPC_MCAST_FRAME (1 << 1)
-#define CDMAC_BD_APP2_MAC_MCAST_FRAME (1 << 0)
-
-/* CDMAC Descriptor APP3: Receive LocalLink Footer Word 6, [3] p74 */
-#define CDMAC_BD_APP3_TLTPID_POS 16
-#define CDMAC_BD_APP3_TLTPID_MASK (0xFFFF << CDMAC_BD_APP3_TLTPID_POS)
-#define CDMAC_BD_APP3_RXCSRAW_POS 0
-#define CDMAC_BD_APP3_RXCSRAW_MASK (0xFFFF << CDMAC_BD_APP3_RXCSRAW_POS)
-
-/* CDMAC Descriptor APP4: Receive LocalLink Footer Word 7, [3] p74 */
-#define CDMAC_BD_APP4_VLANTAG_POS 16
-#define CDMAC_BD_APP4_VLANTAG_MASK (0xFFFF << CDMAC_BD_APP4_VLANTAG_POS)
-#define CDMAC_BD_APP4_RXBYTECNT_POS 0
-#define CDMAC_BD_APP4_RXBYTECNT_MASK (0x3FFF << CDMAC_BD_APP4_RXBYTECNT_POS)
-
-/*
- * SDMA Register Definition
- *
- * [0]: http://www.xilinx.com/support/documentation
- *
- * [1]: [0]/ip_documentation/mpmc.pdf
- * page 54, SDMA Register Summary
- * page 160, SDMA Registers
- *
- * [2]: [0]/user_guides/ug200.pdf
- * page 244, DMA Controller -- Programming Interface and Registers
- */
-#define SDMA_CTRL_REGTYPE u32
-#define SDMA_CTRL_REGSIZE sizeof(SDMA_CTRL_REGTYPE)
-struct sdma_ctrl {
- /* Transmit Registers */
- SDMA_CTRL_REGTYPE tx_nxtdesc_ptr; /* TX Next Description Pointer */
- SDMA_CTRL_REGTYPE tx_curbuf_addr; /* TX Current Buffer Address */
- SDMA_CTRL_REGTYPE tx_curbuf_length; /* TX Current Buffer Length */
- SDMA_CTRL_REGTYPE tx_curdesc_ptr; /* TX Current Descriptor Pointer */
- SDMA_CTRL_REGTYPE tx_taildesc_ptr; /* TX Tail Descriptor Pointer */
- SDMA_CTRL_REGTYPE tx_chnl_ctrl; /* TX Channel Control */
- SDMA_CTRL_REGTYPE tx_irq_reg; /* TX Interrupt Register */
- SDMA_CTRL_REGTYPE tx_chnl_sts; /* TX Status Register */
- /* Receive Registers */
- SDMA_CTRL_REGTYPE rx_nxtdesc_ptr; /* RX Next Descriptor Pointer */
- SDMA_CTRL_REGTYPE rx_curbuf_addr; /* RX Current Buffer Address */
- SDMA_CTRL_REGTYPE rx_curbuf_length; /* RX Current Buffer Length */
- SDMA_CTRL_REGTYPE rx_curdesc_ptr; /* RX Current Descriptor Pointer */
- SDMA_CTRL_REGTYPE rx_taildesc_ptr; /* RX Tail Descriptor Pointer */
- SDMA_CTRL_REGTYPE rx_chnl_ctrl; /* RX Channel Control */
- SDMA_CTRL_REGTYPE rx_irq_reg; /* RX Interrupt Register */
- SDMA_CTRL_REGTYPE rx_chnl_sts; /* RX Status Register */
- /* Control Registers */
- SDMA_CTRL_REGTYPE dma_control_reg; /* DMA Control Register */
-};
-
-#define SDMA_CTRL_REGNUMS sizeof(struct sdma_ctrl)/SDMA_CTRL_REGSIZE
-
-/*
- * DMAC Register Index Enumeration
- *
- * [2]: http://www.xilinx.com/support/documentation/user_guides/ug200.pdf
- * page 244, DMA Controller -- Programming Interface and Registers
- */
-enum dmac_ctrl {
- /* Transmit Registers */
- TX_NXTDESC_PTR = 0, /* TX Next Description Pointer */
- TX_CURBUF_ADDR, /* TX Current Buffer Address */
- TX_CURBUF_LENGTH, /* TX Current Buffer Length */
- TX_CURDESC_PTR, /* TX Current Descriptor Pointer */
- TX_TAILDESC_PTR, /* TX Tail Descriptor Pointer */
- TX_CHNL_CTRL, /* TX Channel Control */
- TX_IRQ_REG, /* TX Interrupt Register */
- TX_CHNL_STS, /* TX Status Register */
- /* Receive Registers */
- RX_NXTDESC_PTR, /* RX Next Descriptor Pointer */
- RX_CURBUF_ADDR, /* RX Current Buffer Address */
- RX_CURBUF_LENGTH, /* RX Current Buffer Length */
- RX_CURDESC_PTR, /* RX Current Descriptor Pointer */
- RX_TAILDESC_PTR, /* RX Tail Descriptor Pointer */
- RX_CHNL_CTRL, /* RX Channel Control */
- RX_IRQ_REG, /* RX Interrupt Register */
- RX_CHNL_STS, /* RX Status Register */
- /* Control Registers */
- DMA_CONTROL_REG /* DMA Control Register */
-};
-
-/* Rx/Tx Channel Control Register (*_chnl_ctrl), [1] p163, [2] p246/p252 */
-#define CHNL_CTRL_ITO_POS 24
-#define CHNL_CTRL_ITO_MASK (0xFF << CHNL_CTRL_ITO_POS)
-#define CHNL_CTRL_IC_POS 16
-#define CHNL_CTRL_IC_MASK (0xFF << CHNL_CTRL_IC_POS)
-#define CHNL_CTRL_MSBADDR_POS 12
-#define CHNL_CTRL_MSBADDR_MASK (0xF << CHNL_CTRL_MSBADDR_POS)
-#define CHNL_CTRL_AME (1 << 11)
-#define CHNL_CTRL_OBWC (1 << 10)
-#define CHNL_CTRL_IOE (1 << 9)
-#define CHNL_CTRL_LIC (1 << 8)
-#define CHNL_CTRL_IE (1 << 7)
-#define CHNL_CTRL_IEE (1 << 2)
-#define CHNL_CTRL_IDE (1 << 1)
-#define CHNL_CTRL_ICE (1 << 0)
-
-/* All interrupt enable bits */
-#define CHNL_CTRL_IRQ_MASK (CHNL_CTRL_IE | \
- CHNL_CTRL_IEE | \
- CHNL_CTRL_IDE | \
- CHNL_CTRL_ICE)
-
-/* Rx/Tx Interrupt Status Register (*_irq_reg), [1] p164, [2] p247/p253 */
-#define IRQ_REG_DTV_POS 24
-#define IRQ_REG_DTV_MASK (0xFF << IRQ_REG_DTV_POS)
-#define IRQ_REG_CCV_POS 16
-#define IRQ_REG_CCV_MASK (0xFF << IRQ_REG_CCV_POS)
-#define IRQ_REG_WRCQ_EMPTY (1 << 14)
-#define IRQ_REG_CIC_POS 10
-#define IRQ_REG_CIC_MASK (0xF << IRQ_REG_CIC_POS)
-#define IRQ_REG_DIC_POS 8
-#define IRQ_REG_DIC_MASK (3 << 8)
-#define IRQ_REG_PLB_RD_NMI (1 << 4)
-#define IRQ_REG_PLB_WR_NMI (1 << 3)
-#define IRQ_REG_EI (1 << 2)
-#define IRQ_REG_DI (1 << 1)
-#define IRQ_REG_CI (1 << 0)
-
-/* All interrupt bits */
-#define IRQ_REG_IRQ_MASK (IRQ_REG_PLB_RD_NMI | \
- IRQ_REG_PLB_WR_NMI | \
- IRQ_REG_EI | IRQ_REG_DI | IRQ_REG_CI)
-
-/* Rx/Tx Channel Status Register (*_chnl_sts), [1] p165, [2] p249/p255 */
-#define CHNL_STS_ERROR_TAIL (1 << 21)
-#define CHNL_STS_ERROR_CMP (1 << 20)
-#define CHNL_STS_ERROR_ADDR (1 << 19)
-#define CHNL_STS_ERROR_NXTP (1 << 18)
-#define CHNL_STS_ERROR_CURP (1 << 17)
-#define CHNL_STS_ERROR_BSYWR (1 << 16)
-#define CHNL_STS_ERROR (1 << 7)
-#define CHNL_STS_IOE (1 << 6)
-#define CHNL_STS_SOE (1 << 5)
-#define CHNL_STS_CMPLT (1 << 4)
-#define CHNL_STS_SOP (1 << 3)
-#define CHNL_STS_EOP (1 << 2)
-#define CHNL_STS_EBUSY (1 << 1)
-
-/* DMA Control Register (dma_control_reg), [1] p166, [2] p256 */
-#define DMA_CONTROL_PLBED (1 << 5)
-#define DMA_CONTROL_RXOCEID (1 << 4)
-#define DMA_CONTROL_TXOCEID (1 << 3)
-#define DMA_CONTROL_TPE (1 << 2)
-#define DMA_CONTROL_RESET (1 << 0)
-
-/* Xilinx Processor Local Bus (PLB) in/out accessors */
-unsigned ll_temac_xlplb_in32(phys_addr_t base);
-void ll_temac_xlplb_out32(phys_addr_t base, unsigned value);
-
-/* collect all register addresses for Xilinx PLB in/out accessors */
-void ll_temac_collect_xlplb_sdma_reg_addr(struct eth_device *dev);
-
-/* initialize both Rx/Tx buffer descriptors */
-int ll_temac_init_sdma(struct eth_device *dev);
-
-/* halt both Rx/Tx transfers */
-int ll_temac_halt_sdma(struct eth_device *dev);
-
-/* reset SDMA and IRQ, disable interrupts and errors */
-int ll_temac_reset_sdma(struct eth_device *dev);
-
-/* receive buffered data from SDMA (polling ISR) */
-int ll_temac_recv_sdma(struct eth_device *dev);
-
-/* send buffered data to SDMA */
-int ll_temac_send_sdma(struct eth_device *dev, void *packet, int length);
-
-#endif /* _XILINX_LL_TEMAC_SDMA_ */
diff --git a/include/netdev.h b/include/netdev.h
index b9bfebac67f7..3958a4cd32dd 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -76,17 +76,6 @@ int tsi108_eth_initialize(bd_t *bis);
int uec_standard_init(bd_t *bis);
int uli526x_initialize(bd_t *bis);
int armada100_fec_register(unsigned long base_addr);
-int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
- unsigned long ctrl_addr);
-/*
- * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
- * exported by a public hader file, we need a global definition at this point.
- */
-#if defined(CONFIG_XILINX_LL_TEMAC)
-#define XILINX_LL_TEMAC_M_FIFO 0 /* use FIFO Ctrl */
-#define XILINX_LL_TEMAC_M_SDMA_PLB (1 << 0)/* use SDMA Ctrl via PLB */
-#define XILINX_LL_TEMAC_M_SDMA_DCR (1 << 1)/* use SDMA Ctrl via DCR */
-#endif
/* Boards with PCI network controllers can call this from their board_eth_init()
* function to initialize whatever's on board.
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 4ac89cdde0c6..00fe5da72d05 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4887,7 +4887,6 @@ CONFIG_X86_REFCODE_ADDR
CONFIG_X86_REFCODE_RUN_ADDR
CONFIG_XGI_XG22_BASE
CONFIG_XILINX_GPIO
-CONFIG_XILINX_LL_TEMAC_CLK
CONFIG_XILINX_SPI_IDLE_VAL
CONFIG_XILINX_TB_WATCHDOG
CONFIG_XR16L2751
--
1.9.1
More information about the U-Boot
mailing list