[U-Boot] [UBOOT PATCH 2/2] eeprom: Added Kconfig support for eeprom u-boot headers

[Vipul Kumar]

This patch added Kconfig support for CONFIG_ZYNQ_EEPROM_BUS
and CONFIG_ZYNQ_GEM_EEPROM_ADDR and enabled it in
respective defconfig.

Signed-off-by: Vipul Kumar <vipulk at xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
---
 configs/syzygy_hub_defconfig                  |  1 +
 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig |  2 ++
 configs/xilinx_zynqmp_zcu102_revA_defconfig   |  2 ++
 configs/xilinx_zynqmp_zcu102_revB_defconfig   |  2 ++
 configs/zynq_zybo_defconfig                   |  1 +
 drivers/misc/Kconfig                          | 13 +++++++++++++
 include/configs/syzygy_hub.h                  |  1 -
 include/configs/xilinx_zynqmp_zcu102.h        |  2 --
 include/configs/zynq_zybo.h                   |  1 -
 9 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig
index 996ecdb..d97ee8a 100644
--- a/configs/syzygy_hub_defconfig
+++ b/configs/syzygy_hub_defconfig
@@ -34,6 +34,7 @@ CONFIG_OF_EMBED=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_FPGA_XILINX=y
 CONFIG_DM_GPIO=y
+CONFIG_ZYNQ_GEM_EEPROM_ADDR=0x57
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_PHY_MARVELL=y
diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
index d0a1467..9c34eea 100644
--- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
@@ -54,6 +54,8 @@ CONFIG_FPGA_ZYNQMPPL=y
 CONFIG_DM_GPIO=y
 CONFIG_CMD_PCA953X=y
 CONFIG_MISC=y
+CONFIG_ZYNQ_EEPROM_BUS=5
+CONFIG_ZYNQ_GEM_EEPROM_ADDR=0x54
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig
index ecefb00..de3cff6 100644
--- a/configs/xilinx_zynqmp_zcu102_revA_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig
@@ -54,6 +54,8 @@ CONFIG_FPGA_ZYNQMPPL=y
 CONFIG_DM_GPIO=y
 CONFIG_CMD_PCA953X=y
 CONFIG_MISC=y
+CONFIG_ZYNQ_EEPROM_BUS=5
+CONFIG_ZYNQ_GEM_EEPROM_ADDR=0x54
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig
index c2add99..04eb5c7 100644
--- a/configs/xilinx_zynqmp_zcu102_revB_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig
@@ -54,6 +54,8 @@ CONFIG_FPGA_ZYNQMPPL=y
 CONFIG_DM_GPIO=y
 CONFIG_CMD_PCA953X=y
 CONFIG_MISC=y
+CONFIG_ZYNQ_EEPROM_BUS=5
+CONFIG_ZYNQ_GEM_EEPROM_ADDR=0x54
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig
index 138b249..73b776c 100644
--- a/configs/zynq_zybo_defconfig
+++ b/configs/zynq_zybo_defconfig
@@ -39,6 +39,7 @@ CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
 CONFIG_FPGA_XILINX=y
 CONFIG_DM_GPIO=y
+CONFIG_ZYNQ_GEM_EEPROM_ADDR=0x50
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index eef7df3..a793ed7 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -219,6 +219,19 @@ config ZYNQ_EEPROM
        help
          This enables the EEPROM driver for Zynq.

+config ZYNQ_EEPROM_BUS
+       int "Define the EEPROM bus number"
+       depends on ARCH_ZYNQMP
+       default -1
+       help
+         Define the EEPROM bus number.
+
+config ZYNQ_GEM_EEPROM_ADDR
+       hex "Define GEM EEPROM address"
+       default 0x0
+       help
+         Define the EEPROM address for GEM.
+
 if I2C_EEPROM

 config SYS_I2C_EEPROM_ADDR
diff --git a/include/configs/syzygy_hub.h b/include/configs/syzygy_hub.h
index 4147b45..b33de1c 100644
--- a/include/configs/syzygy_hub.h
+++ b/include/configs/syzygy_hub.h
@@ -13,7 +13,6 @@

 #define CONFIG_ZYNQ_I2C1
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_ZYNQ_GEM_EEPROM_ADDR    0x57
 #define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET 0xFA

 #define CONFIG_EXTRA_ENV_SETTINGS       \
diff --git a/include/configs/xilinx_zynqmp_zcu102.h b/include/configs/xilinx_zynqmp_zcu102.h
index 85f78ba..b738f3b 100644
--- a/include/configs/xilinx_zynqmp_zcu102.h
+++ b/include/configs/xilinx_zynqmp_zcu102.h
@@ -42,8 +42,6 @@
 #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR}

 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_ZYNQ_EEPROM_BUS         5
-#define CONFIG_ZYNQ_GEM_EEPROM_ADDR    0x54
 #define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET 0x20

 #include <configs/xilinx_zynqmp.h>
diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h
index 808967c..d2abd9e 100644
--- a/include/configs/zynq_zybo.h
+++ b/include/configs/zynq_zybo.h
@@ -14,7 +14,6 @@
 #define CONFIG_ZYNQ_I2C0
 #define CONFIG_ZYNQ_I2C1
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_ZYNQ_GEM_EEPROM_ADDR    0x50
 #define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET 0xFA
 #define CONFIG_DISPLAY
 #define CONFIG_I2C_EDID
--
2.7.4

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.