[U-Boot] [UBOOT PATCH v2 1/2] eeprom: Enabled eeprom u-boot headers in defconfig

[Vipul Kumar]

This patch enabled eeprom related u-boot headers in
the respective defconfig and removed CONFIG_ZYNQ_EEPROM.

Signed-off-by: Vipul Kumar <vipulk at xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
---
- Changes in v2:
- Removed CONFIG_ZYNQ_EEPROM for zynqmp.
- Enabled configs defined under CONFIG_ZYNQ_EEPROM for zynq
  in defconfig and removed CONFIG_ZYNQ_EEPROM.
- Branch: u-boot-microblaze/kconfig
---
 configs/zynq_zc702_defconfig       | 6 ++++++
 configs/zynq_zc706_defconfig       | 6 ++++++
 include/configs/xilinx_zynqmp_ep.h | 1 -
 include/configs/zynq-common.h      | 9 ---------
 include/configs/zynq_zc70x.h       | 2 --
 5 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
index 8e8b800..2970ef8 100644
--- a/configs/zynq_zc702_defconfig
+++ b/configs/zynq_zc702_defconfig
@@ -43,6 +43,12 @@ CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_GPIO=y
 CONFIG_SYS_I2C_ZYNQ=y
 CONFIG_ZYNQ_I2C0=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x54
+CONFIG_SYS_EEPROM_SIZE=1024
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
index 8f83d17..b51567c 100644
--- a/configs/zynq_zc706_defconfig
+++ b/configs/zynq_zc706_defconfig
@@ -43,6 +43,12 @@ CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_GPIO=y
 CONFIG_SYS_I2C_ZYNQ=y
 CONFIG_ZYNQ_I2C0=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x54
+CONFIG_SYS_EEPROM_SIZE=1024
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h
index 3a572b7..6c48e15 100644
--- a/include/configs/xilinx_zynqmp_ep.h
+++ b/include/configs/xilinx_zynqmp_ep.h
@@ -15,7 +15,6 @@

 #define CONFIG_ZYNQ_SDHCI_MAX_FREQ     52000000
 #define CONFIG_ZYNQ_SDHCI_MIN_FREQ     (CONFIG_ZYNQ_SDHCI_MAX_FREQ >> 9)
-#define CONFIG_ZYNQ_EEPROM
 #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
                                 ZYNQMP_USB1_XHCI_BASEADDR}

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 0ebb66b..4622d39 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -122,15 +122,6 @@
 # define CONFIG_SYS_I2C
 #endif

-/* EEPROM */
-#ifdef CONFIG_ZYNQ_EEPROM
-# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN                1
-# define CONFIG_SYS_I2C_EEPROM_ADDR            0x54
-# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     4
-# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-# define CONFIG_SYS_EEPROM_SIZE                        1024 /* Bytes */
-#endif
-
 /* Total Size of Environment Sector */
 #define CONFIG_ENV_SIZE                        (128 << 10)

diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
index 720f953..715ea80 100644
--- a/include/configs/zynq_zc70x.h
+++ b/include/configs/zynq_zc70x.h
@@ -10,8 +10,6 @@
 #ifndef __CONFIG_ZYNQ_ZC70X_H
 #define __CONFIG_ZYNQ_ZC70X_H

-#define CONFIG_ZYNQ_EEPROM
-
 #include <configs/zynq-common.h>

 #endif /* __CONFIG_ZYNQ_ZC70X_H */
--
2.7.4

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.