[U-Boot] [PATCH 1/3] ARM: Kconfig: Move TI_SECURE_DEVICE to a common area

[Lokesh Vutla]

On Wednesday 14 February 2018 11:23 PM, Andrew F. Davis wrote:
> TI_SECURE_DEVICE is used by both OMAP2+ and Keystone2 family devices,
> and so when ARCH_OMAP2PLUS was used to gate off the OMAP2+ Kconfig
> Keystone2 family devices lost this config option.
> 
> Move this option out of mach-omap2 Kconfig to a spot accessible by both
> families. We picked arch/arm/Kconfig over the TI specific board/ti/
> location as this option is not specific to our boards but rather our
> architecture.
> 
> Plus at some point this option can be changed to just
> SECURE_DEVICE, as having secure parts is not exclusive to TI and
> so other vendors can interpret this option as needed by their device
> configurations.
> 
> Fixes: a93fbf4a7892 ("ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig")
> Signed-off-by: Andrew F. Davis <afd at ti.com>

Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>

Thanks and regards,
Lokesh

> ---
>  arch/arm/Kconfig            | 10 ++++++++++
>  arch/arm/mach-omap2/Kconfig | 10 ----------
>  2 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 7b618d6881..466c7502d5 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1189,6 +1189,16 @@ config ARCH_ASPEED
>  
>  endchoice
>  
> +config TI_SECURE_DEVICE
> +	bool "HS Device Type Support"
> +	depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS
> +	help
> +	  If a high secure (HS) device type is being used, this config
> +	  must be set. This option impacts various aspects of the
> +	  build system (to create signed boot images that can be
> +	  authenticated) and the code. See the doc/README.ti-secure
> +	  file for further details.
> +
>  source "arch/arm/mach-aspeed/Kconfig"
>  
>  source "arch/arm/mach-at91/Kconfig"
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index abd1aa7fe1..62c25c4044 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -133,16 +133,6 @@ config SYS_MPUCLK
>  	help
>  	  Defines the MPU clock speed (in MHz).
>  
> -config TI_SECURE_DEVICE
> -	bool "HS Device Type Support"
> -	depends on OMAP54XX || AM43XX || AM33XX || ARCH_KEYSTONE
> -	help
> -	  If a high secure (HS) device type is being used, this config
> -	  must be set. This option impacts various aspects of the
> -	  build system (to create signed boot images that can be
> -	  authenticated) and the code. See the doc/README.ti-secure
> -	  file for further details.
> -
>  config TI_SECURE_EMIF_REGION_START
>  	hex "Reserved EMIF region start address"
>  	depends on TI_SECURE_DEVICE
>