[U-Boot] [UBOOT PATCH v2 1/2] microblaze: Added Kconfig support for CONFIG_XILINX_GPIO

[Vipul Kumar]

This patch added Kconfig support for CONFIG_XILINX_GPIO
and enabled it in respective defconfig.

Signed-off-by: Vipul Kumar <vipulk at xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
---
- Changes in v2:
- Removed "Enable" from description
- Branch: u-boot-microblaze/kconfig
---
 configs/microblaze-generic_defconfig | 1 +
 drivers/gpio/Kconfig                 | 5 +++++
 include/configs/microblaze-generic.h | 1 -
 3 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
index ac49404..699dc44 100644
--- a/configs/microblaze-generic_defconfig
+++ b/configs/microblaze-generic_defconfig
@@ -46,6 +46,7 @@ CONFIG_BOOTP_BOOTPATH=y
 CONFIG_BOOTP_GATEWAY=y
 CONFIG_BOOTP_HOSTNAME=y
 CONFIG_SPL_DM=y
+CONFIG_XILINX_GPIO=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_PHY_ATHEROS=y
 CONFIG_PHY_BROADCOM=y
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 34d4409..cc75aec 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -183,6 +183,11 @@ config SANDBOX_GPIO_COUNT
          of 'anonymous' GPIOs that do not belong to any device or bank.
          Select a suitable value depending on your needs.

+config XILINX_GPIO
+       bool "Xilinx GPIO driver"
+       help
+         This config enable the Xilinx GPIO driver for Microblaze.
+
 config CMD_TCA642X
        bool "tca642x - Command to access tca642x state"
        help
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index fe9aaae..73c3c2a 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -41,7 +41,6 @@

 /* gpio */
 #ifdef XILINX_GPIO_BASEADDR
-# define CONFIG_XILINX_GPIO
 # define CONFIG_SYS_GPIO_0_ADDR                XILINX_GPIO_BASEADDR
 #endif

--
2.7.4

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.