[U-Boot] [PATCH 10/14] ARM: dts: rockchip: Enable integrated phy support for rk3229-evb

[David Wu]

In fact, the evb-rk3229 is default supported the integrated phy,
not need to change any hardware. So it is better to enbale it and
disable external 1000M phy.

Signed-off-by: David Wu <david.wu at rock-chips.com>
---

 arch/arm/dts/rk3229-evb.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/dts/rk3229-evb.dts b/arch/arm/dts/rk3229-evb.dts
index ae0b0a4..547c7a2 100644
--- a/arch/arm/dts/rk3229-evb.dts
+++ b/arch/arm/dts/rk3229-evb.dts
@@ -63,7 +63,29 @@
 	snps,reset-delays-us = <0 10000 1000000>;
 	tx_delay = <0x30>;
 	rx_delay = <0x10>;
+	status = "disabled";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC_SRC>;
+	assigned-clock-rates = <50000000>;
+	clock_in_out = "output";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rmii";
+	phy-handle = <&phy>;
 	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: phy at 0 {
+			compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			phy-is-integrated;
+		};
+	};
 };
 
 &emmc {
-- 
2.7.4