[U-Boot] [PATCH v6 00/25] Fix and extend i.MX HAB layer

[Bryan O'Donoghue]

On 08/02/18 12:43, Jagan Teki wrote:
> On Fri, Jan 12, 2018 at 6:09 PM, Bryan O'Donoghue
> <bryan.odonoghue at linaro.org> wrote:
>> v6:
>> - Added patch 21/25 return zero on open (unlocked) board when
>>    calling authenticate_image() - Breno
>>
>> - Added Tested-by: Breno Matheus Lima <brenomatheus at gmail.com>
>>    as indicated for remainder 24/25 patches
>>
>> - Added Reviewed-by: Fabio Estevam <fabio.estevam at nxp.com>
>>    as indicated for remainder 24/25 patches
>>
>> v5:
>> - Drop dcache disable across HAB call.
>>    We can't replicate this error on the current codebase and the available
>>    images. We'll have to wait for the error to crop up again before pushing
>>    that patch any further.
>>
>> v4:
>> - No change mixed extra patches @ v3 unnoticed with previous
>>    git-send
>>
>> v3:
>> - Only call into ROM if headers are verified. - Bryan
>>
>> - Print HAB event log if and only if a call was made to HAB
>>    and a meaningful status code has been obtained. - Breno
>>
>> v2:
>> - Fix compilation warnings and errors in SPL highlighted by
>>    Breno Matheus Lima
>>
>> - Add CC: Breno Matheus Lima <brenomatheus at gmail.com> to all patches
>>
>> v1:
>> This patchset updates the i.MX HAB layer in u-boot to fix a list of
>> identified issues and then to add and extend existing functionality.
>>
>> The first block of patches 0001-0006 deal with fixing existing code,
>>
>> - Fixes indentation
>> - Fixes the treatment of input parameters to hab_auth_image.
>>
>> The second block of patches 0007-0013 are about tidying up the HAB code
>>
>> - Remove reliance on hard-coding to specific offsets
>> - IVT header drives locating CSF
>> - Continue to support existing boards
>>
>> Patches 0014 onwards extend out the HAB functionality.
>>
>> - hab_rvt_check_target is a recommended check in the NXP documents to
>>    perform prior to hab_rvt_authenticate_image
>> - hab_rvt_failsafe is a useful function to set the board into BootROM
>>    USB recovery mode.
>>
>>
>>
>> Bryan O'Donoghue (25):
>>    arm: imx: hab: Make authenticate_image return int
>>    arm: imx: hab: Fix authenticate_image result code
>>    arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail
>>    arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail
>>    arm: imx: hab: Move IVT_SIZE to hab.h
>>    arm: imx: hab: Move CSF_PAD_SIZE to hab.h
>>    arm: imx: hab: Fix authenticate_image input parameters
>>    arm: imx: hab: Add IVT header definitions
>>    arm: imx: hab: Add IVT header verification
>>    arm: imx: hab: Verify IVT self matches calculated address
>>    arm: imx: hab: Only call ROM once headers are verified
>>    arm: imx: hab: Print CSF based on IVT descriptor
>>    arm: imx: hab: Print additional IVT elements during debug
>>    arm: imx: hab: Define rvt_check_target()
>>    arm: imx: hab: Implement hab_rvt_check_target
>>    arm: imx: hab: Add a hab_rvt_check_target to image auth
>>    arm: imx: hab: Print HAB event log only after calling ROM
>>    arm: imx: hab: Make internal functions and data static
>>    arm: imx: hab: Prefix authenticate_image with imx_hab
>>    arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled
>>    arm: imx: hab: Make authenticate_image() return zero on open boards
>>    arm: imx: hab: Make imx_hab_is_enabled global
>>    arm: imx: hab: Define rvt_failsafe()
>>    arm: imx: hab: Implement hab_rvt_failsafe
>>    arm: imx: hab: Add hab_failsafe console command
>>
>>   arch/arm/include/asm/mach-imx/hab.h |  46 +++-
>>   arch/arm/mach-imx/hab.c             | 461 +++++++++++++++++++++---------------
>>   arch/arm/mach-imx/spl.c             |  38 ++-
>>   3 files changed, 354 insertions(+), 191 deletions(-)
> 
> I tried Secure boot before[1] with SPL and U-Boot proper and work well.
> 
> I'm observing authentication issue while loading U-Boot proper, U-Boot
> proper now have features like SPL DM and SPL FIT etc
> 
> U-Boot SPL 2018.03-rc1-00182-gb81f7c9 (Feb 08 2018 - 17:19:03 +0530)
> Trying to boot from MMC1
> Expected Linux image is not found. Trying to start U-boot
> 
> Authenticate image from DDR location 0x17800000...
> bad magic magic=0xb8 length=0x841b version=0x17
> bad length magic=0xb8 length=0x841b version=0x17
> bad version magic=0xb8 length=0x841b version=0x17
> spl: ERROR:  image authentication unsuccessful
> ### ERROR ### Please RESET the board ###
> 
> Please let me know where I missed, I'm authenticating SPL and
> u-boot-dtb.img now.

Can you send

1. The load address of the binary
2. The command you are using for authenticate image ?