[U-Boot] [PATCH 2/2] efi_selftest: test gop bitblt
Heinrich Schuchardt
xypron.glpk at gmx.de
Wed Feb 7 21:09:22 UTC 2018
The test dr
Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
---
lib/efi_selftest/Makefile | 1 +
lib/efi_selftest/efi_selftest_bitblt.c | 311 +++++++++++++++++++++++++++++++++
2 files changed, 312 insertions(+)
create mode 100644 lib/efi_selftest/efi_selftest_bitblt.c
diff --git a/lib/efi_selftest/Makefile b/lib/efi_selftest/Makefile
index 88c44840d52..b975da2955c 100644
--- a/lib/efi_selftest/Makefile
+++ b/lib/efi_selftest/Makefile
@@ -14,6 +14,7 @@ CFLAGS_REMOVE_efi_selftest_miniapp_return.o := $(CFLAGS_NON_EFI) -Os
obj-$(CONFIG_CMD_BOOTEFI_SELFTEST) += \
efi_selftest.o \
+efi_selftest_bitblt.o \
efi_selftest_controllers.o \
efi_selftest_console.o \
efi_selftest_devicepath.o \
diff --git a/lib/efi_selftest/efi_selftest_bitblt.c b/lib/efi_selftest/efi_selftest_bitblt.c
new file mode 100644
index 00000000000..53cc633acc6
--- /dev/null
+++ b/lib/efi_selftest/efi_selftest_bitblt.c
@@ -0,0 +1,311 @@
+/*
+ * efi_selftest_bitblt
+ *
+ * Copyright (c) 2017 Heinrich Schuchardt <xypron.glpk at gmx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Test the block image transfer in the graphical output protocol.
+ * An animated submarine is shown.
+ */
+
+#include <efi_selftest.h>
+
+#define WIDTH 200
+#define HEIGHT 120
+#define DEPTH 60
+
+static const struct efi_gop_pixel BLACK = { 0, 0, 0, 0};
+static const struct efi_gop_pixel RED = { 0, 0, 255, 0};
+static const struct efi_gop_pixel ORANGE = { 0, 128, 255, 0};
+static const struct efi_gop_pixel YELLOW = { 0, 255, 255, 0};
+static const struct efi_gop_pixel GREEN = { 0, 255, 0, 0};
+static const struct efi_gop_pixel DARK_BLUE = {128, 0, 0, 0};
+static const struct efi_gop_pixel LIGHT_BLUE = {255, 192, 192, 0};
+
+static struct efi_boot_services *boottime;
+static efi_guid_t efi_gop_guid = EFI_GOP_GUID;
+static struct efi_gop *gop;
+static struct efi_gop_pixel *bitmap;
+static struct efi_event *event;
+static efi_uintn_t xpos;
+
+static void ellipse(efi_uintn_t x, efi_uintn_t y,
+ efi_uintn_t x0, efi_uintn_t y0,
+ efi_uintn_t x1, efi_uintn_t y1,
+ const struct efi_gop_pixel col, struct efi_gop_pixel *pix)
+{
+ efi_uintn_t xm = x0 + x1;
+ efi_uintn_t ym = y0 + y1;
+ efi_uintn_t dx = x1 - x0 + 1;
+ efi_uintn_t dy = y1 - y0 + 1;
+
+ if (dy * dy * (2 * x - xm) * (2 * x - xm) +
+ dx * dx * (2 * y - ym) * (2 * y - ym) <= dx * dx * dy * dy)
+ *pix = col;
+}
+
+static void rectangle(efi_uintn_t x, efi_uintn_t y,
+ efi_uintn_t x0, efi_uintn_t y0,
+ efi_uintn_t x1, efi_uintn_t y1,
+ const struct efi_gop_pixel col, struct efi_gop_pixel *pix)
+{
+ if (x >= x0 && y >= y0 && x <= x1 && y <= y1)
+ *pix = col;
+}
+
+/*
+ * Notification function, copies image to video.
+ * The position is incremented in each call.
+ *
+ * @event notified event
+ * @context pointer to the notification count
+ */
+static void EFIAPI notify(struct efi_event *event, void *context)
+{
+ efi_uintn_t *pos = context;
+ efi_uintn_t dx, sx, width;
+
+ if (!pos)
+ return;
+
+ /* Increment position */
+ *pos += 5;
+ if (*pos >= WIDTH + gop->mode->info->width)
+ *pos = 0;
+
+ width = WIDTH;
+ dx = *pos - WIDTH;
+ sx = 0;
+ if (*pos >= gop->mode->info->width) {
+ width = WIDTH + gop->mode->info->width - *pos;
+ } else if (*pos < WIDTH) {
+ dx = 0;
+ sx = WIDTH - *pos;
+ width = *pos;
+ }
+
+ /* Copy image to video */
+ gop->blt(gop, bitmap, EFI_BLT_BUFFER_TO_VIDEO, sx, 0, dx, DEPTH,
+ width, HEIGHT, WIDTH);
+}
+
+/*
+ * Setup unit test.
+ *
+ * @handle: handle of the loaded image
+ * @systable: system table
+ * @return: EFI_ST_SUCCESS for success
+ */
+static int setup(const efi_handle_t handle,
+ const struct efi_system_table *systable)
+{
+ efi_status_t ret;
+ struct efi_gop_pixel pix;
+ efi_uintn_t x, y;
+
+ boottime = systable->boottime;
+
+ /* Create event */
+ ret = boottime->create_event(EVT_TIMER | EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK, notify, (void *)&xpos,
+ &event);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("could not create event\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Get graphical output protocol */
+ ret = boottime->locate_protocol(&efi_gop_guid, NULL, (void **)&gop);
+ if (ret != EFI_SUCCESS) {
+ gop = NULL;
+ efi_st_printf("Graphical output protocol is not available.\n");
+ return EFI_ST_SUCCESS;
+ }
+
+ /* Prepare image of submarine */
+ ret = boottime->allocate_pool(EFI_LOADER_DATA,
+ sizeof(struct efi_gop_pixel) *
+ WIDTH * HEIGHT, (void **)&bitmap);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Out of memory\n");
+ return EFI_ST_FAILURE;
+ }
+ for (y = 0; y < HEIGHT; ++y) {
+ for (x = 0; x < WIDTH; ++x) {
+ pix = DARK_BLUE;
+
+ /* Propeller */
+ ellipse(x, y, 35, 55, 43, 75, BLACK, &pix);
+ ellipse(x, y, 36, 56, 42, 74, LIGHT_BLUE, &pix);
+
+ ellipse(x, y, 35, 75, 43, 95, BLACK, &pix);
+ ellipse(x, y, 36, 76, 42, 94, LIGHT_BLUE, &pix);
+
+ /* Shaft */
+ rectangle(x, y, 35, 73, 100, 77, BLACK, &pix);
+
+ /* Periscope */
+ ellipse(x, y, 120, 10, 160, 50, BLACK, &pix);
+ ellipse(x, y, 121, 11, 159, 59, YELLOW, &pix);
+ ellipse(x, y, 130, 20, 150, 40, BLACK, &pix);
+ ellipse(x, y, 131, 21, 149, 49, DARK_BLUE, &pix);
+ rectangle(x, y, 135, 10, 160, 50, DARK_BLUE, &pix);
+ ellipse(x, y, 132, 10, 138, 20, BLACK, &pix);
+ ellipse(x, y, 133, 11, 139, 19, RED, &pix);
+
+ /* Rudder */
+ ellipse(x, y, 45, 40, 75, 70, BLACK, &pix);
+ ellipse(x, y, 46, 41, 74, 69, ORANGE, &pix);
+ ellipse(x, y, 45, 80, 75, 109, BLACK, &pix);
+ ellipse(x, y, 46, 81, 74, 108, RED, &pix);
+
+ /* Bridge */
+ ellipse(x, y, 100, 30, 120, 50, BLACK, &pix);
+ ellipse(x, y, 101, 31, 119, 49, GREEN, &pix);
+ ellipse(x, y, 140, 30, 160, 50, BLACK, &pix);
+ ellipse(x, y, 141, 31, 159, 49, GREEN, &pix);
+ rectangle(x, y, 110, 30, 150, 50, BLACK, &pix);
+ rectangle(x, y, 110, 31, 150, 50, GREEN, &pix);
+
+ /* Hull */
+ ellipse(x, y, 50, 40, 199, 109, BLACK, &pix);
+ ellipse(x, y, 51, 41, 198, 108, LIGHT_BLUE, &pix);
+
+ /* Port holes */
+ ellipse(x, y, 79, 57, 109, 82, BLACK, &pix);
+ ellipse(x, y, 80, 58, 108, 81, LIGHT_BLUE, &pix);
+ ellipse(x, y, 83, 61, 105, 78, BLACK, &pix);
+ ellipse(x, y, 84, 62, 104, 77, YELLOW, &pix);
+ /*
+ * This port hole is created by copying
+ * ellipse(x, y, 119, 57, 149, 82, BLACK, &pix);
+ * ellipse(x, y, 120, 58, 148, 81, LIGHT_BLUE, &pix);
+ * ellipse(x, y, 123, 61, 145, 78, BLACK, &pix);
+ * ellipse(x, y, 124, 62, 144, 77, YELLOW, &pix);
+ */
+ ellipse(x, y, 159, 57, 189, 82, BLACK, &pix);
+ ellipse(x, y, 160, 58, 188, 81, LIGHT_BLUE, &pix);
+ ellipse(x, y, 163, 61, 185, 78, BLACK, &pix);
+ ellipse(x, y, 164, 62, 184, 77, YELLOW, &pix);
+
+ bitmap[WIDTH * y + x] = pix;
+ }
+ }
+
+ return EFI_ST_SUCCESS;
+}
+
+/*
+ * Tear down unit test.
+ *
+ * @return: EFI_ST_SUCCESS for success
+ */
+static int teardown(void)
+{
+ efi_status_t ret;
+
+ if (bitmap) {
+ ret = boottime->free_pool(bitmap);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("FreePool failed\n");
+ return EFI_ST_FAILURE;
+ }
+ }
+ if (event) {
+ ret = boottime->close_event(event);
+ event = NULL;
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("could not close event\n");
+ return EFI_ST_FAILURE;
+ }
+ }
+ return EFI_ST_SUCCESS;
+}
+
+/*
+ * Execute unit test.
+ *
+ * @return: EFI_ST_SUCCESS for success
+ */
+static int execute(void)
+{
+ u32 max_mode;
+ efi_status_t ret;
+ struct efi_gop_mode_info *info;
+
+ if (!gop)
+ return EFI_ST_SUCCESS;
+
+ if (!gop->mode) {
+ efi_st_error("EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE missing\n");
+ return EFI_ST_FAILURE;
+ }
+ info = gop->mode->info;
+ max_mode = gop->mode->max_mode;
+ if (!max_mode) {
+ efi_st_error("No graphical mode available\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Fill background */
+ ret = gop->blt(gop, bitmap, EFI_BLT_VIDEO_FILL, 0, 0, 0, 0,
+ info->width, info->height, 0);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("EFI_BLT_VIDEO_FILL failed\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Copy image to video */
+ ret = gop->blt(gop, bitmap, EFI_BLT_BUFFER_TO_VIDEO, 0, 0, 0, DEPTH,
+ WIDTH, HEIGHT, 0);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("EFI_BLT_BUFFER_TO_VIDEO failed\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Copy left port hole */
+ ret = gop->blt(gop, bitmap, EFI_BLT_VIDEO_TO_VIDEO,
+ 79, 57 + DEPTH, 119, 57 + DEPTH,
+ 31, 26, 0);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("EFI_BLT_VIDEO_TO_VIDEO failed\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Copy port holes back to buffer */
+ ret = gop->blt(gop, bitmap, EFI_BLT_VIDEO_TO_BLT_BUFFER,
+ 94, 57 + DEPTH, 94, 57,
+ 90, 26, WIDTH);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("EFI_BLT_VIDEO_TO_BLT_BUFFER failed\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Set 250ms timer */
+ xpos = WIDTH;
+ ret = boottime->set_timer(event, EFI_TIMER_PERIODIC, 250000);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Could not set timer\n");
+ return EFI_ST_FAILURE;
+ }
+
+ con_out->set_cursor_position(con_out, 0, 0);
+ con_out->set_attribute(con_out, EFI_WHITE | EFI_BACKGROUND_BLUE);
+ efi_st_printf("The submarine should have three yellow port holes.\n");
+ efi_st_printf("Press any key to continue");
+ efi_st_get_key();
+ con_out->set_attribute(con_out, EFI_LIGHTGRAY);
+ efi_st_printf("\n");
+
+ return EFI_ST_SUCCESS;
+}
+
+EFI_UNIT_TEST(bitblt) = {
+ .name = "block image transfer",
+ .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
+ .setup = setup,
+ .execute = execute,
+ .teardown = teardown,
+ .on_request = true,
+};
--
2.14.2
More information about the U-Boot
mailing list