[U-Boot] [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
jh80.chung at samsung.com
Mon Feb 19 11:27:01 UTC 2018
Dear Tom,
Could you pull these patches to u-boot/master?
If there is a problem, let me know, plz.
The following changes since commit 02b0895c215e252cff50d9edf53a972d2bbbfd30:
Merge git://git.denx.de/u-boot-sh (2018-02-17 16:06:59 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to dfca07d60e8d1977fff5531291d0a39b8384d0a9:
mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support (2018-02-19 20:19:20 +0900)
----------------------------------------------------------------
Alex Kiernan (1):
mmc: Fix uninitialised priv member
Jean-Jacques Hiblot (15):
mmc: omap_hsmmc: cleanup clock configuration
mmc: omap_hsmmc: set MMC mode in the UHSMS bit field
mmc: omap_hsmmc: Add tuning support
mmc: omap_hsmmc: Workaround for errata id i802
mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm
mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl
mmc: omap_hsmmc: update mmc->clock with the actual bus speed
mmc: omap_hsmmc: implement send_init_stream callback
mmc: omap_hsmmc: add signal voltage selection support
ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes
dts: am57xx-beagle-x15: disable UHS and HS200 support
dts: am57xx-idk: disable HS200 support
configs: dra7xx_evm/dra7xx_hs_evm: Enable MMC HS200 and SD UHS support
mmc: Fix bug in sd_set_card_speed()
mmc: fix bug in mmc_startup_v4()
Kishon Vijay Abraham I (11):
mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios
mmc: omap_hsmmc: add support to set default io voltage
mmc: omap_hsmmc: Enable DDR mode support
mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config
ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot
mmc: omap_hsmmc: Add support to set IODELAY values
mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions
mmc: omap_hsmmc: allow mmc clock to be gated
ARM: OMAP5: set mmc clock frequency to 192MHz
ARM: dts: DRA7: use new dra7-specific compatible string
ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1
Marek Vasut (10):
mmc: uniphier-sd: Add compatible strings for RCar Gen2
mmc: uniphier-sd: Use mmc_of_parse()
mmc: uniphier-sd: Add Renesas RCar quirks
mmc: uniphier-sd: Handle Renesas div-by-1
mmc: uniphier-sd: Handle DMA completion flag differences
mmc: uniphier-sd: Handle bus width 0
mmc: uniphier-sd: Always check controller version
mmc: uniphier-sd: Properly handle pin voltage configuration
mmc: uniphier-sd: Export registers and IO accessors
mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support
Masahiro Yamada (1):
mmc: use pr_* log functions
arch/arm/dts/am57xx-beagle-x15.dts | 6 +
arch/arm/dts/am57xx-idk-common.dtsi | 2 +
arch/arm/dts/dra7.dtsi | 22 +-
arch/arm/include/asm/arch-omap5/clock.h | 2 +-
arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h | 3 +
arch/arm/include/asm/arch-omap5/sys_proto.h | 7 +
arch/arm/include/asm/omap_mmc.h | 59 +-
arch/arm/mach-omap2/omap5/dra7xx_iodelay.c | 30 +
arch/arm/mach-omap2/omap5/hw_data.c | 10 +-
board/ti/am57xx/board.c | 30 +
board/ti/dra7xx/evm.c | 29 +
configs/dra7xx_evm_defconfig | 3 +
configs/dra7xx_hs_evm_defconfig | 3 +
drivers/mmc/Kconfig | 9 +
drivers/mmc/Makefile | 1 +
drivers/mmc/mmc.c | 71 +-
drivers/mmc/omap_hsmmc.c | 954 +++++++++++++++++++++--
drivers/mmc/uniphier-sd-rcar.c | 288 +++++++
drivers/mmc/uniphier-sd.c | 274 +++----
drivers/mmc/uniphier-sd.h | 155 ++++
include/configs/am57xx_evm.h | 2 -
include/configs/dra7xx_evm.h | 2 -
include/mmc.h | 1 +
23 files changed, 1697 insertions(+), 266 deletions(-)
create mode 100644 drivers/mmc/uniphier-sd-rcar.c
create mode 100644 drivers/mmc/uniphier-sd.h
More information about the U-Boot
mailing list