[U-Boot] [UBOOT PATCH 1/2] microblaze: Added Kconfig support for CONFIG_XILINX_GPIO

[Michal Simek]

On 16.2.2018 15:34, Vipul Kumar wrote:
> This patch added Kconfig support for CONFIG_XILINX_GPIO
> and enabled it in respective defconfig.
> 
> Signed-off-by: Vipul Kumar <vipulk at xilinx.com>
> Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
> ---
>  configs/microblaze-generic_defconfig | 1 +
>  drivers/gpio/Kconfig                 | 5 +++++
>  include/configs/microblaze-generic.h | 1 -
>  3 files changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
> index ca68a81..e707b9f 100644
> --- a/configs/microblaze-generic_defconfig
> +++ b/configs/microblaze-generic_defconfig
> @@ -42,6 +42,7 @@ CONFIG_SPL_OF_CONTROL=y
>  CONFIG_OF_EMBED=y
>  CONFIG_NETCONSOLE=y
>  CONFIG_SPL_DM=y
> +CONFIG_XILINX_GPIO=y
>  CONFIG_MTD_NOR_FLASH=y
>  CONFIG_PHY_ATHEROS=y
>  CONFIG_PHY_BROADCOM=y
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 34d4409..f35c2e7 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -183,6 +183,11 @@ config SANDBOX_GPIO_COUNT
>  	  of 'anonymous' GPIOs that do not belong to any device or bank.
>  	  Select a suitable value depending on your needs.
>  
> +config XILINX_GPIO
> +	bool "Enable Xilinx GPIO driver"

Remove "Enable" from description.

M

> +	help
> +	  This config enable the Xilinx GPIO driver for Microblaze.
> +
>  config CMD_TCA642X
>  	bool "tca642x - Command to access tca642x state"
>  	help
> diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
> index a065dd3..de33583 100644
> --- a/include/configs/microblaze-generic.h
> +++ b/include/configs/microblaze-generic.h
> @@ -41,7 +41,6 @@
>  
>  /* gpio */
>  #ifdef XILINX_GPIO_BASEADDR
> -# define CONFIG_XILINX_GPIO
>  # define CONFIG_SYS_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
>  #endif
>  
>