[U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig

[Calvin Johnson]

> Hi,
> 
> > From: U-Boot [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Stefan
> > Mavrodiev
> > Sent: Friday, February 2, 2018 7:24 PM
> 
> <snip>
> 
> > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index
> > 95b7534..c934aed 100644
> > --- a/drivers/net/phy/Kconfig
> > +++ b/drivers/net/phy/Kconfig
> > @@ -12,6 +12,13 @@ menuconfig PHYLIB
> >
> >  if PHYLIB
> >
> > +config PHY_ADDR
> > +	int "PHY address"
> > +	default 1 if ARCH_SUNXI

Sorry, I meant the  default value can be defined in board/sunxi/Kconfig.
Remaining definition of PHY_ADDR config can be here.

> > +	default 0
> > +	help
> > +	  The address of PHY on MII bus. Usually in range of 0 to 31.
> 
> Isn't board Kconfig, the right place to keep this?