[U-Boot] [PATCH v4 2/2] Enable test case with A20-OLinuXino-Lime2
Jagan Teki
jagannadh.teki at gmail.com
Tue Feb 6 16:48:36 UTC 2018
On Tue, Feb 6, 2018 at 6:44 PM, Stefan Mavrodiev <stefan at olimex.com> wrote:
> Driver testing is done with A20-OLinuXino-Lime2. Testing
> requirements are:
> - Exposing spi0 alternative pins in the dts file
> - Add alias node, enabling driver probing
> - Add flash sub-node of spi
> - Enable spi flash related options in the defconfig file
>
> The testing log is:
>
> U-Boot SPL 2018.03-rc1-00075-g35a689a-dirty (Feb 06 2018 - 14:40:07 +0200)
> DRAM: 1024 MiB
> CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
> Trying to boot from FEL
Why FEL? can't it boot from SPI-FLASH?
>
> U-Boot 2018.03-rc1-00075-g35a689a-dirty (Feb 06 2018 - 14:40:07 +0200) Allwinner Technology
>
> CPU: Allwinner A20 (SUN7I)
> Model: Olimex A20-OLinuXino-LIME2
> I2C: ready
> DRAM: 1 GiB
> MMC: SUNXI SD/MMC: 0
> Loading Environment from SPI Flash... SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB
> OK
> In: serial
> Out: serial
> Err: serial
> Allwinner mUSB OTG (Peripheral)
> SCSI: SATA link 0 timeout.
> AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
> flags: ncq stag pm led clo only pmp pio slum part ccc apst
> Net: No ethernet found.
> starting USB...
> USB0: USB EHCI 1.00
> USB1: USB OHCI 1.0
> USB2: USB EHCI 1.00
> USB3: USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 2 for devices... 1 USB Device(s) found
> scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot: 0
>
> # Probe device
> => sf probe
> SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB
How did this resolved w/o sspi?
>
> # Erase
> => sf erase 0x1000 0x100
> SF: 256 bytes @ 0x1000 Erased: ERROR
> => sf erase 0x1000 0x1000
> SF: 4096 bytes @ 0x1000 Erased: OK
>
> # Test
> => sf test 0 100000
> SPI flash test:
> 0 erase: 12104 ticks, 84 KiB/s 0.672 Mbps
> 1 check: 8881 ticks, 115 KiB/s 0.920 Mbps
> 2 write: 10824 ticks, 94 KiB/s 0.752 Mbps
> 3 read: 8872 ticks, 115 KiB/s 0.920 Mbps
> Test passed
> 0 erase: 12104 ticks, 84 KiB/s 0.672 Mbps
> 1 check: 8881 ticks, 115 KiB/s 0.920 Mbps
> 2 write: 10824 ticks, 94 KiB/s 0.752 Mbps
> 3 read: 8872 ticks, 115 KiB/s 0.920 Mbps
>
> # Try write/read
> => sf erase 0x1000 0x1000
> SF: 4096 bytes @ 0x1000 Erased: OK
>
> => md.b 0x50000000 0x100
> 50000000: a9 4d b7 68 d2 48 69 c3 09 78 fa d3 33 66 e9 53 .M.h.Hi..x..3f.S
> 50000010: b0 53 af 79 ad 33 79 b1 f1 e3 1d 09 2e ba dd dc .S.y.3y.........
> 50000020: 8c eb eb 53 f4 ef 66 89 b5 e9 f6 fb af 73 7f cb ...S..f......s..
> 50000030: b6 4b bf de c3 fd de bb 9a 53 ad 7d ef 38 6f bf .K.......S.}.8o.
> 50000040: fd fb e7 5e e9 db fc 0c fc f7 be 76 ad b9 fd eb ...^.......v....
> 50000050: f3 ed 5f b5 bb bd ba 8f ff df 1f bf f3 ff fb d7 .._.............
> 50000060: b7 6e 9e 5f af 7a 62 ed 7f 66 1b 6d fd fb 47 f7 .n._.zb..f.m..G.
> 50000070: b7 fa f4 db d5 b6 d5 ff 81 e6 f5 d9 8f ef ff db ................
> 50000080: b7 dd bd fb f3 1d 9d 2f f6 db c8 7f fb cf b9 f3 ......./........
> 50000090: 3c ee da 2f b7 5e 6f bc f1 2f 2b cf 3f f2 fb ee <../.^o../+.?...
> 500000a0: 6f 5e 99 c3 3b 51 bd d4 be 40 4e db ab ed f9 77 o^..;Q... at N....w
> 500000b0: 9f f6 7d ed 54 4a 68 f8 7d ee 53 9b ff ae ef e4 ..}.TJh.}.S.....
> 500000c0: 73 ff 3c c7 f7 df f6 be bf 0f 97 96 3d 9b 9e 9f s.<.........=...
> 500000d0: e4 49 ca ff be fa ff df f7 7a cf ab 7f 7a 7b cf .I.......z...z{.
> 500000e0: bb c7 9f 3f c1 99 f2 f2 bf ee cf fb d5 b9 e2 e8 ...?............
> 500000f0: ec e8 b2 bd 21 1f 5a ef 7a 7d 9d ad 31 89 3f 6f ....!.Z.z}..1.?o
>
> => sf write 0x50000000 0x1000 0x100
> device 0 offset 0x1000, size 0x100
> SF: 256 bytes @ 0x1000 Written: OK
> => sf read 0x51000000 0x1000 0x100
> device 0 offset 0x1000, size 0x100
> SF: 256 bytes @ 0x1000 Read: OK
>
> => cmp.b 0x50000000 0x51000000 0x100
> Total of 256 byte(s) were the same
>
> Signed-off-by: Stefan Mavrodiev <stefan at olimex.com>
> ---
> arch/arm/dts/sun7i-a20-olinuxino-lime2.dts | 30 ++++++++++++++++++++++++++++++
> configs/A20-OLinuXino-Lime2_defconfig | 11 +++++++++++
> drivers/mtd/spi/Makefile | 4 +++-
> include/configs/sunxi-common.h | 2 ++
> 4 files changed, 46 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
> index d5c796c..a6ee87c 100644
> --- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
> +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
> @@ -54,6 +54,7 @@
>
> aliases {
> serial0 = &uart0;
> + spi0 = &spi0;
> };
>
> chosen {
> @@ -215,6 +216,20 @@
> allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> };
>
> + spi0_pins_b: spi0 at 1 {
> + allwinner,pins = "PC0", "PC1", "PC2";
> + allwinner,function = "spi0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + spi0_cs0_pins_b: spi0_cs0 at 1 {
> + allwinner,pins = "PC23";
> + allwinner,function = "spi0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allw inner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> usb0_id_detect_pin: usb0_id_detect_pin at 0 {
> allwinner,pins = "PH4";
> allwinner,function = "gpio_in";
> @@ -257,6 +272,21 @@
> status = "okay";
> };
>
> +&spi0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi0_pins_b>, <&spi0_cs0_pins_b>;
> + status = "okay";
> +
> + flash: w25q128 at 0 {
Was it sync from Linux?
I think as per binding docs
[label:] node-name[@unit-address]
vendor: subsys-nane[@0]
w25q128: spi-nor at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "winbond,w25q128", "jedec,spi-nor", "spi-flash";
> + reg = <0>;
> + spi-max-frequency = <20000000>;
> + status = "okay";
> + };
> +};
> +
> &uart0 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart0_pins_a>;
> diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
> index 1edc844..da5ca34 100644
> --- a/configs/A20-OLinuXino-Lime2_defconfig
> +++ b/configs/A20-OLinuXino-Lime2_defconfig
> @@ -30,3 +30,14 @@ CONFIG_SCSI=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_MUSB_GADGET=y
> CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_SF_TEST=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_WINBOND=y
> +CONFIG_SPL_SPI_SUNXI=y
> +CONFIG_DM_SPI=y
> +CONFIG_SUN4I_SPI=y
> +# CONFIG_ENV_IS_IN_FAT is not set
> +# CONFIG_ENV_IS_IN_MMC is not set
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
> index fcda023..d4a5fbd 100644
> --- a/drivers/mtd/spi/Makefile
> +++ b/drivers/mtd/spi/Makefile
> @@ -10,9 +10,11 @@ obj-$(CONFIG_DM_SPI_FLASH) += sf-uclass.o
> ifdef CONFIG_SPL_BUILD
> obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o
> obj-$(CONFIG_SPL_SPI_SUNXI) += sunxi_spi_spl.o
> +else
> +obj-$(CONFIG_SPI_FLASH) += sf_probe.o
> endif
This will break SPL build with sf_probe.c and even we can unnecessary
build other SPI_FLASH files.
More information about the U-Boot
mailing list