[U-Boot] [uboot-snps-arc] [PATCH 1/2] SPI Flash: add support of sst26wf* flash series
Eugeniy Paltsev
Eugeniy.Paltsev at synopsys.com
Fri Feb 23 19:01:24 UTC 2018
Hi Jagan,
Maybe you have any comments or remarks about this patch? And if you don't could you please apply it. Thanks!
On Tue, 2018-02-06 at 18:15 +0300, Eugeniy Paltsev wrote:
> sst26wf flash series block protection implementation differs
> from other SST series, so add implementation for sst26wf
> lock/unlock/is_locked functions.
>
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
> ---
> drivers/mtd/spi/spi_flash.c | 188 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 188 insertions(+)
>
> diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
> index 294d9f9..ec3f5bc 100644
> --- a/drivers/mtd/spi/spi_flash.c
> +++ b/drivers/mtd/spi/spi_flash.c
> @@ -842,6 +842,184 @@ int stm_unlock(struct spi_flash *flash, u32 ofs, size_t len)
> }
> #endif
>
> +#if defined(CONFIG_SPI_FLASH_SST)
> +#define SST26_CMD_READ_BPR 0x72
> +#define SST26_CMD_WRITE_BPR 0x42
> +
> +#define BLOCK_64K_SZ 0x10000
> +#define MAX_BPR_REG_LEN (18 + 1)
> +#define SST26WF_BOUND_REG_SIZE ((32 + 4 * 8) * 1024)
> +
> +bool sst26_check_bpr(u32 bpr_size, u8 *cmd, u32 bit)
> +{
> + return !!(cmd[bpr_size - (bit / 8) - 1] & BIT(bit % 8));
> +}
> +
> +bool sst26_clear_bpr(u32 bpr_size, u8 *cmd, u32 bit)
> +{
> + cmd[bpr_size - (bit / 8) - 1] &= ~BIT(bit % 8);
> + return false;
> +}
> +
> +bool sst26_set_bpr(u32 bpr_size, u8 *cmd, u32 bit)
> +{
> + cmd[bpr_size - (bit / 8) - 1] |= BIT(bit % 8);
> + return false;
> +}
> +
> +enum lock_ctl {
> + CTL_LOCK,
> + CTL_UNLOCK,
> + CTL_CHECK
> +};
> +
> +/*
> + * sst26wf016/sst26wf032/sst26wf064 have next block protection:
> + * 4x - 8 KByte blocks - read & write protection bits - upper addresses
> + * 1x - 32 KByte blocks - write protection bits
> + * rest - 64 KByte blocks - write protection bits
> + * 1x - 32 KByte blocks - write protection bits
> + * 4x - 8 KByte blocks - read & write protection bits - lower addresses
> + *
> + * We'll support only per 64k lock/unlock so lower and upper 64 KByte region
> + * will be treated as single block.
> + */
> +
> +/*
> + * Lock, unlock or check lock status of the flash region of the flash (depending
> + * on the lock_ctl value)
> + */
> +int sst26_lock_ctl(struct spi_flash *flash, u32 ofs, size_t len, enum lock_ctl ctl)
> +{
> + u32 i, bpr_ptr, rptr_64k, lptr_64k, bpr_size;
> + bool lower_64k = false, upper_64k = false;
> + u8 cmd, bpr_buff[MAX_BPR_REG_LEN] = {};
> + int ret;
> +
> + bool (* bpr_bit_process) (u32 bpr_size, u8 *, u32);
> +
> + /* Check length and offset for 64k alignment */
> + if ((ofs & 0xFFFF) || (len & 0xFFFF))
> + return -EINVAL;
> +
> + if (ofs + len > flash->size)
> + return -EINVAL;
> +
> + /* SST26 family has only 16 Mbit, 32 Mbit and 64 Mbit IC */
> + if (flash->size != 0x200000 &&
> + flash->size != 0x400000 &&
> + flash->size != 0x800000)
> + return -EINVAL;
> +
> + bpr_size = 2 + (flash->size / BLOCK_64K_SZ / 8);
> +
> + cmd = SST26_CMD_READ_BPR;
> + ret = spi_flash_read_common(flash, &cmd, 1, bpr_buff, bpr_size);
> + if (ret < 0) {
> + printf("SF: fail to read block-protection register\n");
> + return ret;
> + }
> +
> + if (ctl == CTL_LOCK)
> + bpr_bit_process = sst26_set_bpr;
> + else if (ctl == CTL_UNLOCK)
> + bpr_bit_process = sst26_clear_bpr;
> + else
> + bpr_bit_process = sst26_check_bpr;
> +
> + rptr_64k = min_t(u32, ofs + len , flash->size - SST26WF_BOUND_REG_SIZE);
> + lptr_64k = max_t(u32, ofs, SST26WF_BOUND_REG_SIZE);
> +
> + upper_64k = ((ofs + len) > (flash->size - SST26WF_BOUND_REG_SIZE));
> + lower_64k = (ofs < SST26WF_BOUND_REG_SIZE);
> +
> + /* Lower bits in block-protection register are about 64k region */
> + bpr_ptr = lptr_64k / BLOCK_64K_SZ - 1;
> +
> + /* Process 64K blocks region */
> + while (lptr_64k < rptr_64k) {
> + if (bpr_bit_process(bpr_size, bpr_buff, bpr_ptr))
> + return 1;
> +
> + bpr_ptr++;
> + lptr_64k += BLOCK_64K_SZ;
> + }
> +
> + /* 32K and 8K region bits in BPR are after 64k region bits */
> + bpr_ptr = (flash->size - 2 * SST26WF_BOUND_REG_SIZE) / BLOCK_64K_SZ;
> +
> + /* Process lower 32K block region */
> + if (lower_64k)
> + if (bpr_bit_process(bpr_size, bpr_buff, bpr_ptr))
> + return 1;
> +
> + bpr_ptr++;
> +
> + /* Process upper 32K block region */
> + if (upper_64k)
> + if (bpr_bit_process(bpr_size, bpr_buff, bpr_ptr))
> + return 1;
> +
> + bpr_ptr++;
> +
> + /* Process lower 8K block region */
> + for (i = 0; i < 4; i++) {
> + if (lower_64k)
> + if (bpr_bit_process(bpr_size, bpr_buff, bpr_ptr))
> + return 1;
> +
> + /* In 8K area BPR has both read and write protection bits */
> + bpr_ptr += 2;
> + }
> +
> + /* Process upper 8K block region */
> + for (i = 0; i < 4; i++) {
> + if (upper_64k)
> + if (bpr_bit_process(bpr_size, bpr_buff, bpr_ptr))
> + return 1;
> +
> + /* In 8K area BPR has both read and write protection bits */
> + bpr_ptr += 2;
> + }
> +
> + /* If we check region status we don't need to write BPR back */
> + if (ctl == CTL_CHECK)
> + return 0;
> +
> + cmd = SST26_CMD_WRITE_BPR;
> + ret = spi_flash_write_common(flash, &cmd, 1, bpr_buff, bpr_size);
> + if (ret < 0) {
> + printf("SF: fail to write block-protection register\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +int sst26_unlock(struct spi_flash *flash, u32 ofs, size_t len)
> +{
> + return sst26_lock_ctl(flash, ofs, len, CTL_UNLOCK);
> +}
> +
> +int sst26_lock(struct spi_flash *flash, u32 ofs, size_t len)
> +{
> + return sst26_lock_ctl(flash, ofs, len, CTL_LOCK);
> +}
> +
> +int sst26_is_locked(struct spi_flash *flash, u32 ofs, size_t len)
> +{
> + /*
> + * is_locked function is used for check before reading or erasing flash
> + * region, so offset and length might be not 64k allighned, so adjust
> + * them to be 64k allighned as sst26_lock_ctl works only with 64k
> + * allighned regions.
> + */
> + ofs -= ofs & 0xFFFF;
> + len = len & 0xFFFF ? (len & ~0xFFFF) + BLOCK_64K_SZ : len;
> +
> + return sst26_lock_ctl(flash, ofs, len, CTL_CHECK);
> +}
> +#endif
>
> #ifdef CONFIG_SPI_FLASH_MACRONIX
> static int macronix_quad_enable(struct spi_flash *flash)
> @@ -1033,6 +1211,16 @@ int spi_flash_scan(struct spi_flash *flash)
> }
> #endif
>
> +/* sst26wf series block protection implementation differs from other series */
> +#if defined(CONFIG_SPI_FLASH_SST)
> + if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_SST &&
> + (JEDEC_ID(info) >> 8) == 0x26) {
> + flash->flash_lock = sst26_lock;
> + flash->flash_unlock = sst26_unlock;
> + flash->flash_is_locked = sst26_is_locked;
> + }
> +#endif
> +
> /* Compute the flash size */
> flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
> flash->page_size = info->page_size;
--
Eugeniy Paltsev
More information about the U-Boot
mailing list