[U-Boot] [PATCH v2 0/4] mmc: omap_hsmmc: Reduce the footprint of the driver and fix am335x clock

[Adam Ford]

On Fri, Feb 23, 2018 at 3:40 AM, Jean-Jacques Hiblot <jjhiblot at ti.com>
wrote:

>
> This series aims at reducing the footprint of the omap_hsmmc driver in
> the SPL (1.5 kB gain in the case of the SPL for the am335x evm).
> It also fixes an issue with the am335x_evm by setting a default maximum
> frequency if none is defined in the dts.
>
> tested on am335x_evm, bbb, bbb (vboot), and dra7 evm
>
>
I tested this version as well.

This series fixes 2d7482cf793f ("mmc: omap_hsmmc: use mmc_of_parse to
populate mmc_config") which made my DM3730 unable to probe the MMC.

Tested-by: Adam Ford <aford173 at gmail.com> #omap3_logic


> Changes in v2:
> - Use a Kconfig option to compile out the ADMA support instead of relying
>   on the platform architecture
>
> Jean-Jacques Hiblot (4):
>   mmc: omap_hsmmc: do not embed struct mmc in struct omap_hsmmc_plat
>   mmc: omap_hsmmc: compile out write support if not needed
>   mmc: omap_hsmmc: make it possible to compile out ADMA support
>   mmc: omap_hsmmc: use a default 52MHz max clock rate if none is
>     specified
>
>  arch/arm/include/asm/omap_mmc.h |  2 +-
>  drivers/mmc/Kconfig             |  9 +++++++++
>  drivers/mmc/omap_hsmmc.c        | 31 ++++++++++++++++++++-----------
>  3 files changed, 30 insertions(+), 12 deletions(-)
>
> --
> 1.9.1
>
>