[U-Boot] [PATCH v2 0/9] rockchip: rk3288-vyasa: dts fixes/additions

Dr. Philipp Tomsich philipp.tomsich at theobroma-systems.com
Fri Feb 23 15:36:33 UTC 2018


> On 23 Feb 2018, at 16:29, Jagan Teki <jagannadh.teki at gmail.com> wrote:
> 
> 
> 
> On 23-Feb-2018 8:53 PM, "Dr. Philipp Tomsich" <philipp.tomsich at theobroma-systems.com <mailto:philipp.tomsich at theobroma-systems.com>> wrote:
> 
>> On 23 Feb 2018, at 16:17, Jagan Teki <jagannadh.teki at gmail.com <mailto:jagannadh.teki at gmail.com>> wrote:
>> 
>> Philipp,
>> 
>> On Wed, Feb 14, 2018 at 9:26 PM, Jagan Teki <jagannadh.teki at gmail.com <mailto:jagannadh.teki at gmail.com>> wrote:
>>> Series add new dts nodes like gmac, usb, io_domains and fixed existing
>>> regulator, pmic stuff as per schematic.
>>> 
>>> Changes for v2:
>>> - Collect Acked-by and Reviewed-by tags from Philipp
>>> - Add eMMC boot support
>>> - Add missing commit message
>>> - Remove RK_GPIO8 macro to sync with Linux
>>> 
>>> Jagan Teki (9):
>>>  ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux
>>>  ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1
>>>  ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC
>>>  ARM: dts: rockchip: Add regulators for rk3288-vyasa
>>>  ARM: dts: rockchip: Add gmac support for rk3288-vyasa board
>>>  rockchip: rk3288-vyasa: defconfig: Enable gmac support
>>>  ARM: dts: rockchip: Add usb host for rk3288-vyasa
>>>  ARM: dts: rockchip: Add usb otg for rk3288-vyasa
>>>  rk3288: vyasa: Add eMMC boot support
>> 
>> Can you pick this series, it's been there in ML from few releases.
> 
> 
> These have been sent only after rc2 was tagged and are on my todo-list
> for next (so they should go at the start of the merge window, when I send
> out the pull-request to get our next merged back onto master).
> 
> This this V2 initial version been from 11/17, ie reason for ping.

Just for future reference: I usually start processing a series once I have a final
version.  I’ve burned my fingers on merging vendor patches in the past after
rc1 had been out.

So my modus operandi now is: once v1 has its status in ‘changes requested’
I won’t track this until I get a newer version that can be merged. And if such a
version comes in after rc2, I’ll try to err on the safe side…
… OTOH, if you just barely miss a merge window and need it in rc2, you should
ping me right away.

Hope this helps,
Phil.

P.S.: I have you TPL fix on Travis right now...



More information about the U-Boot mailing list