[U-Boot] [UBOOT PATCH 1/2] eeprom: Added Kconfig support for ZYNQ_EEPROM

[Vipul Kumar]

This patch added Kconfig support for ZYNQ_EEPROM
and enabled it in respective defconfig.

Signed-off-by: Vipul Kumar <vipulk at xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
---
 configs/xilinx_zynqmp_ep_defconfig | 1 +
 configs/zynq_zc702_defconfig       | 1 +
 configs/zynq_zc706_defconfig       | 1 +
 drivers/misc/Kconfig               | 5 +++++
 include/configs/xilinx_zynqmp_ep.h | 1 -
 include/configs/zynq_zc70x.h       | 1 -
 6 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/configs/xilinx_zynqmp_ep_defconfig b/configs/xilinx_zynqmp_ep_defconfig
index 7f8e774..2b8be89 100644
--- a/configs/xilinx_zynqmp_ep_defconfig
+++ b/configs/xilinx_zynqmp_ep_defconfig
@@ -58,6 +58,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_CADENCE=y
 CONFIG_MISC=y
+CONFIG_ZYNQ_EEPROM=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
index 878bc79..e0a41c0 100644
--- a/configs/zynq_zc702_defconfig
+++ b/configs/zynq_zc702_defconfig
@@ -40,6 +40,7 @@ CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
 CONFIG_FPGA_XILINX=y
 CONFIG_DM_GPIO=y
+CONFIG_ZYNQ_EEPROM=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
index 7b2e072..c869316 100644
--- a/configs/zynq_zc706_defconfig
+++ b/configs/zynq_zc706_defconfig
@@ -40,6 +40,7 @@ CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
 CONFIG_FPGA_XILINX=y
 CONFIG_DM_GPIO=y
+CONFIG_ZYNQ_EEPROM=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f1c15cb..eef7df3 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -214,6 +214,11 @@ config SPL_I2C_EEPROM
          This option is an SPL-variant of the I2C_EEPROM option.
          See the help of I2C_EEPROM for details.

+config ZYNQ_EEPROM
+       bool "Enable driver for ZYNQ EEPROM"
+       help
+         This enables the EEPROM driver for Zynq.
+
 if I2C_EEPROM

 config SYS_I2C_EEPROM_ADDR
diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h
index 3a572b7..6c48e15 100644
--- a/include/configs/xilinx_zynqmp_ep.h
+++ b/include/configs/xilinx_zynqmp_ep.h
@@ -15,7 +15,6 @@

 #define CONFIG_ZYNQ_SDHCI_MAX_FREQ     52000000
 #define CONFIG_ZYNQ_SDHCI_MIN_FREQ     (CONFIG_ZYNQ_SDHCI_MAX_FREQ >> 9)
-#define CONFIG_ZYNQ_EEPROM
 #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
                                 ZYNQMP_USB1_XHCI_BASEADDR}

diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
index fc46fec..88a7abd 100644
--- a/include/configs/zynq_zc70x.h
+++ b/include/configs/zynq_zc70x.h
@@ -11,7 +11,6 @@
 #define __CONFIG_ZYNQ_ZC70X_H

 #define CONFIG_ZYNQ_I2C0
-#define CONFIG_ZYNQ_EEPROM

 #include <configs/zynq-common.h>

--
2.7.4

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.