[U-Boot] [PATCH 1/9] phy: add support for bcm6368 usbh phy
Álvaro Fernández Rojas
noltari at gmail.com
Sun Feb 4 10:19:26 UTC 2018
Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
drivers/phy/Kconfig | 6 ++
drivers/phy/Makefile | 1 +
drivers/phy/bcm6368-usbh-phy.c | 203 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 210 insertions(+)
create mode 100644 drivers/phy/bcm6368-usbh-phy.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 43fb4c9bfd..d3fa9ded2a 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -71,6 +71,12 @@ config BCM6358_USBH_PHY
help
Support for the Broadcom MIPS BCM6358 USBH PHY.
+config BCM6368_USBH_PHY
+ bool "BCM6368 USBH PHY support"
+ depends on PHY && ARCH_BMIPS
+ help
+ Support for the Broadcom MIPS BCM6368 USBH PHY.
+
config PIPE3_PHY
bool "Support omap's PIPE3 PHY"
depends on PHY && ARCH_OMAP2PLUS
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 04843fd49b..d8239854a3 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o
obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o
obj-$(CONFIG_BCM6348_USBH_PHY) += bcm6348-usbh-phy.o
obj-$(CONFIG_BCM6358_USBH_PHY) += bcm6358-usbh-phy.o
+obj-$(CONFIG_BCM6368_USBH_PHY) += bcm6368-usbh-phy.o
obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o
obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o
obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o
diff --git a/drivers/phy/bcm6368-usbh-phy.c b/drivers/phy/bcm6368-usbh-phy.c
new file mode 100644
index 0000000000..93577b30ba
--- /dev/null
+++ b/drivers/phy/bcm6368-usbh-phy.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari at gmail.com>
+ *
+ * Derived from linux/arch/mips/bcm63xx/usb-common.c:
+ * Copyright 2008 Maxime Bizon <mbizon at freebox.fr>
+ * Copyright 2013 Florian Fainelli <florian at openwrt.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <power-domain.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <dm/device.h>
+
+/* USBH PLL Control register */
+#define USBH_PLL_REG 0x18
+#define USBH_PLL_IDDQ_PWRDN BIT(9)
+#define USBH_PLL_PWRDN_DELAY BIT(10)
+
+/* USBH Swap Control register */
+#define USBH_SWAP_REG 0x1c
+#define USBH_SWAP_OHCI_DATA BIT(0)
+#define USBH_SWAP_OHCI_ENDIAN BIT(1)
+#define USBH_SWAP_EHCI_DATA BIT(3)
+#define USBH_SWAP_EHCI_ENDIAN BIT(4)
+
+/* USBH Setup register */
+#define USBH_SETUP_REG 0x28
+#define USBH_SETUP_IOC BIT(4)
+#define USBH_SETUP_IPP BIT(5)
+
+struct bcm6368_usbh_hw {
+ uint32_t setup_clr;
+ uint32_t setup_set;
+ uint32_t pll_clr;
+};
+
+struct bcm6368_usbh_priv {
+ const struct bcm6368_usbh_hw *hw;
+ void __iomem *regs;
+};
+
+static int bcm6368_usbh_init(struct phy *phy)
+{
+ struct bcm6368_usbh_priv *priv = dev_get_priv(phy->dev);
+ const struct bcm6368_usbh_hw *hw = priv->hw;
+
+ /* configure to work in native cpu endian */
+ clrsetbits_be32(priv->regs + USBH_SWAP_REG,
+ USBH_SWAP_EHCI_ENDIAN | USBH_SWAP_OHCI_ENDIAN,
+ USBH_SWAP_EHCI_DATA | USBH_SWAP_OHCI_DATA);
+
+ /* setup config */
+ if (hw->setup_clr)
+ clrbits_be32(priv->regs + USBH_SETUP_REG,
+ hw->setup_clr);
+
+ setbits_be32(priv->regs + USBH_SETUP_REG, hw->setup_set);
+
+ /* enable pll control */
+ if (hw->pll_clr)
+ clrbits_be32(priv->regs + USBH_PLL_REG,
+ hw->pll_clr);
+
+ return 0;
+}
+
+static struct phy_ops bcm6368_usbh_ops = {
+ .init = bcm6368_usbh_init,
+};
+
+static const struct bcm6368_usbh_hw bcm6328_hw = {
+ .pll_clr = USBH_PLL_IDDQ_PWRDN | USBH_PLL_PWRDN_DELAY,
+ .setup_clr = 0,
+ .setup_set = USBH_SETUP_IOC,
+};
+
+static const struct bcm6368_usbh_hw bcm6362_hw = {
+ .pll_clr = 0,
+ .setup_clr = 0,
+ .setup_set = USBH_SETUP_IOC,
+};
+
+static const struct bcm6368_usbh_hw bcm6368_hw = {
+ .pll_clr = 0,
+ .setup_clr = 0,
+ .setup_set = USBH_SETUP_IOC,
+};
+
+static const struct bcm6368_usbh_hw bcm63268_hw = {
+ .pll_clr = USBH_PLL_IDDQ_PWRDN | USBH_PLL_PWRDN_DELAY,
+ .setup_clr = USBH_SETUP_IPP,
+ .setup_set = USBH_SETUP_IOC,
+};
+
+static const struct udevice_id bcm6368_usbh_ids[] = {
+ {
+ .compatible = "brcm,bcm6328-usbh",
+ .data = (ulong)&bcm6328_hw,
+ }, {
+ .compatible = "brcm,bcm6362-usbh",
+ .data = (ulong)&bcm6362_hw,
+ }, {
+ .compatible = "brcm,bcm6368-usbh",
+ .data = (ulong)&bcm6368_hw,
+ }, {
+ .compatible = "brcm,bcm63268-usbh",
+ .data = (ulong)&bcm63268_hw,
+ }, { /* sentinel */ }
+};
+
+static int bcm6368_usbh_probe(struct udevice *dev)
+{
+ struct bcm6368_usbh_priv *priv = dev_get_priv(dev);
+ const struct bcm6368_usbh_hw *hw =
+ (const struct bcm6368_usbh_hw *)dev_get_driver_data(dev);
+#if defined(CONFIG_POWER_DOMAIN)
+ struct power_domain pwr_dom;
+#endif
+ struct reset_ctl rst_ctl;
+ struct clk clk;
+ fdt_addr_t addr;
+ fdt_size_t size;
+ int ret;
+
+ addr = devfdt_get_addr_size_index(dev, 0, &size);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ priv->regs = ioremap(addr, size);
+ priv->hw = hw;
+
+ /* enable usbh clock */
+ ret = clk_get_by_name(dev, "usbh", &clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_enable(&clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_free(&clk);
+ if (ret < 0)
+ return ret;
+
+#if defined(CONFIG_POWER_DOMAIN)
+ /* enable power domain */
+ ret = power_domain_get(dev, &pwr_dom);
+ if (ret < 0)
+ return ret;
+
+ ret = power_domain_on(&pwr_dom);
+ if (ret < 0)
+ return ret;
+
+ ret = power_domain_free(&pwr_dom);
+ if (ret < 0)
+ return ret;
+#endif
+
+ /* perform reset */
+ ret = reset_get_by_index(dev, 0, &rst_ctl);
+ if (ret < 0)
+ return ret;
+
+ ret = reset_deassert(&rst_ctl);
+ if (ret < 0)
+ return ret;
+
+ ret = reset_free(&rst_ctl);
+ if (ret < 0)
+ return ret;
+
+ /* enable usb_ref clock */
+ ret = clk_get_by_name(dev, "usb_ref", &clk);
+ if (!ret) {
+ ret = clk_enable(&clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_free(&clk);
+ if (ret < 0)
+ return ret;
+ }
+
+ mdelay(100);
+
+ return 0;
+}
+
+U_BOOT_DRIVER(bcm6368_usbh) = {
+ .name = "bcm6368-usbh",
+ .id = UCLASS_PHY,
+ .of_match = bcm6368_usbh_ids,
+ .ops = &bcm6368_usbh_ops,
+ .priv_auto_alloc_size = sizeof(struct bcm6368_usbh_priv),
+ .probe = bcm6368_usbh_probe,
+};
--
2.11.0
More information about the U-Boot
mailing list