[U-Boot] Please fix ls1046ardb

[York Sun]

On 02/14/2018 04:30 PM, Jonathan Gray wrote:
> On Wed, Feb 14, 2018 at 07:25:53PM +0000, York Sun wrote:
>> Mingkai,
>>
>> LS1046ARDB is broken for both QSPI and SD. For QSPI, I cannot use
>> environmental variables. For SD boot, it fails when trying to init SD
>> card. Partial log is
>>
>> Initializing DDR....using SPD
>> WARNING: Calling __hwconfig without a buffer and before environment is ready
>> WARNING: Calling __hwconfig without a buffer and before environment is ready
>> WARNING: Calling __hwconfig without a buffer and before environment is ready
>> WARNING: Calling __hwconfig without a buffer and before environment is ready
>> Trying to boot from MMC1
>> unable to select a mode
>> mmc_init: -524, time 51
>> spl: mmc init failed with error: -524
>> SPL: failed to boot from all boot devices
>> ### ERROR ### Please RESET the board ###
>>
>> Please investigate.
>>
>> York
> 
> This reminds me of the problem I ran into with qemu vexpress-a15.

Thanks for the quick note. I tried the patch in your second link (i.e.
patch 871324), but it didn't fix my problem.

York