[U-Boot] [PATCH] board: i.MX6QDL: add Engicam i.CoreM6 1.5 QDL MIPI starter kit

[Stefano Babic]

On 05/01/2018 19:32, Jagan Teki wrote:
> i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected
> to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for
> Android and video capture application.
> 
> notable features:
> CPU			NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9 at 800MHz
> Memory  		Up to 2 GB DDR3-1066
> Video Interfaces	Up to 1 Parallel Up to 2 LVDS HDMI 1.4
> 			port 8 bit CSI INPUT MIPI-CSI INPUT
> 1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc
> 
> This patch adds support for Quad/Dual and DualLite/Solo SOM's on
> MIPI starter kit with boot from SD and eMMC.
> 
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---

Applied after fixing the warning:


ERROR: space required before the open parenthesis '('
 #166: FILE: board/engicam/common/board.c:47:
 +               else if(is_mx6dl() || is_mx6solo())

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================