[U-Boot] [PATCH v2] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
Ashish Kumar
Ashish.Kumar at nxp.com
Mon Feb 19 08:46:58 UTC 2018
IFC-NOR and QSPI-NOR pins are muxed on SoC,so they
cannot be accessed simultaneously, but
IFC-NOR can be accessed along with SD-BOOT.
ls1088aqds_sdcard_ifc_defconfig: is defconfig for
SD as boot source and IFC-NOR to be used as flash,
this will be used to write IFC-NOR image on IFC flash.
QSPI and DSPI cannot be accessed in this defconfig.
IFC-NOR image is generated by ls1088aqds_defconfig.
Signed-off-by: Ashish Kumar <Ashish.Kumar at nxp.com>
---
depends upon:
http://patchwork.ozlabs.org/project/uboot/list/?series=29287
v2:
Remove hardcoded timing for sys, ddr clock
Remove hardcoded timing for IFC
Move unrelated code to different clean-up patch
arch/arm/dts/fsl-ls1088a-qds.dts | 37 ++++++++++++++++++++++
arch/arm/dts/fsl-ls1088a.dtsi | 5 +++
board/freescale/ls1088a/MAINTAINERS | 2 ++
configs/ls1088aqds_defconfig | 43 ++++++++++++++++++++++++++
configs/ls1088aqds_sdcard_ifc_defconfig | 54 +++++++++++++++++++++++++++++++++
include/configs/ls1088aqds.h | 12 +++++---
6 files changed, 148 insertions(+), 5 deletions(-)
create mode 100644 configs/ls1088aqds_defconfig
create mode 100644 configs/ls1088aqds_sdcard_ifc_defconfig
diff --git a/arch/arm/dts/fsl-ls1088a-qds.dts b/arch/arm/dts/fsl-ls1088a-qds.dts
index 225c7c5..02000fc 100644
--- a/arch/arm/dts/fsl-ls1088a-qds.dts
+++ b/arch/arm/dts/fsl-ls1088a-qds.dts
@@ -19,6 +19,43 @@
};
};
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* NOR, NAND Flashes and FPGA on board */
+ ranges = <0 0 0x5 0x80000000 0x08000000
+ 2 0 0x5 0x30000000 0x00010000
+ 3 0 0x5 0x20000000 0x00010000>;
+ status = "okay";
+
+ nor at 0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand at 2,0 {
+ compatible = "fsl,ifc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x1 0x0 0x10000>;
+ };
+
+ fpga: board-control at 3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus", "fsl,ls1088aqds-fpga",
+ "fsl,fpga-qixis";
+ reg = <0x2 0x0 0x0000100>;
+ bank-width = <1>;
+ device-width = <1>;
+ ranges = <0 2 0 0x100>;
+ };
+};
+
&dspi {
bus-num = <0>;
status = "okay";
diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index f8f8654..b4a42cf 100644
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -75,6 +75,11 @@
reg-names = "QuadSPI", "QuadSPI-memory";
num-cs = <4>;
};
+ ifc: ifc at 1530000 {
+ compatible = "fsl,ifc", "simple-bus";
+ reg = <0x0 0x2240000 0x0 0x20000>;
+ interrupts = <0 21 0x4>; /* Level high type */
+ };
usb0: usb3 at 3100000 {
compatible = "fsl,layerscape-dwc3";
diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS
index 371e5db..4d804d9 100644
--- a/board/freescale/ls1088a/MAINTAINERS
+++ b/board/freescale/ls1088a/MAINTAINERS
@@ -15,6 +15,8 @@ F: board/freescale/ls1088a/
F: include/configs/ls1088aqds.h
F: configs/ls1088aqds_qspi_defconfig
F: configs/ls1088aqds_sdcard_qspi_defconfig
+F: configs/ls1088aqds_defconfig
+F: configs/ls1088aqds_sdcard_ifc_defconfig
LS1088AQDS_QSPI_SECURE_BOOT BOARD
M: Udit Agarwal <udit.agarwal at nxp.com>
diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig
new file mode 100644
index 0000000..acb9d7b
--- /dev/null
+++ b/configs/ls1088aqds_defconfig
@@ -0,0 +1,43 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088AQDS=y
+CONFIG_SYS_TEXT_BASE=0x30100000
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
+CONFIG_FSL_IFC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SCSI_AHCI=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_CMD_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+# CONFIG_USE_BOOTCOMMAND is not set
diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig
new file mode 100644
index 0000000..d415026
--- /dev/null
+++ b/configs/ls1088aqds_sdcard_ifc_defconfig
@@ -0,0 +1,54 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088AQDS=y
+CONFIG_SYS_TEXT_BASE=0x80400000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_PARTITIONS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_SD_BOOT=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SPL=y
+CONFIG_SPL_BUILD=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FSL_IFC=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SCSI_AHCI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 1f2161b..1fd2286 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -27,7 +27,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_SIZE 0x2000
#else
-#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000)
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_SIZE 0x20000
@@ -41,6 +40,8 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 100000000
#else
+#define CONFIG_QIXIS_I2C_ACCESS
+#define CONFIG_SYS_I2C_EARLY_INIT
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
#endif
@@ -89,13 +90,14 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12)
#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
FTIM0_NOR_TEADC(0x5) | \
+ FTIM0_NOR_TAVDS(0x6) | \
FTIM0_NOR_TEAHC(0x5))
#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
- FTIM1_NOR_TRAD_NOR(0x1a) |\
+ FTIM1_NOR_TRAD_NOR(0x1a) | \
FTIM1_NOR_TSEQRAD_NOR(0x13))
-#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
- FTIM2_NOR_TCH(0x4) | \
- FTIM2_NOR_TWPH(0x0E) | \
+#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x8) | \
+ FTIM2_NOR_TCH(0x8) | \
+ FTIM2_NOR_TWPH(0xe) | \
FTIM2_NOR_TWP(0x1c))
#define CONFIG_SYS_NOR_FTIM3 0x04000000
#define CONFIG_SYS_IFC_CCR 0x01000000
--
2.7.4
More information about the U-Boot
mailing list