[U-Boot] [PATCH 4/7] usb: rockchip: implement K_FW_LBA_READ_10 command

Kever Yang kever.yang at rock-chips.com
Thu Jul 5 01:19:01 UTC 2018


Hi Alberto,


On 07/04/2018 03:02 AM, Alberto Panizzo wrote:
> It is now possible to read from block device al logic layer.
> Corresponding command on workstation is:
> rkdeveloptool rl <start_blk> <blk_cnt> <file>
>
> Signed-off-by: Alberto Panizzo <alberto at amarulasolutions.com>
> ---
>  arch/arm/include/asm/arch-rockchip/f_rockusb.h |   2 +
>  drivers/usb/gadget/f_rockusb.c                 | 102 ++++++++++++++++++++++++-
>  2 files changed, 103 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/include/asm/arch-rockchip/f_rockusb.h b/arch/arm/include/asm/arch-rockchip/f_rockusb.h
> index f5cad8e..f04d401 100644
> --- a/arch/arm/include/asm/arch-rockchip/f_rockusb.h
> +++ b/arch/arm/include/asm/arch-rockchip/f_rockusb.h
> @@ -120,6 +120,8 @@ struct f_rockusb {
>  	unsigned int lba;
>  	unsigned int dl_size;
>  	unsigned int dl_bytes;
> +	unsigned int ul_size;
> +	unsigned int ul_bytes;
>  	struct blk_desc *desc;
>  	int reboot_flag;
>  	void *buf;
> diff --git a/drivers/usb/gadget/f_rockusb.c b/drivers/usb/gadget/f_rockusb.c
> index 7612871..dbf31cb 100644
> --- a/drivers/usb/gadget/f_rockusb.c
> +++ b/drivers/usb/gadget/f_rockusb.c
> @@ -340,6 +340,7 @@ static int rockusb_tx_write(const char *buffer, unsigned int buffer_size)
>  
>  	memcpy(in_req->buf, buffer, buffer_size);
>  	in_req->length = buffer_size;
> +	debug("Transferring 0x%x bytes\n", buffer_size);
>  	usb_ep_dequeue(rockusb_func->in_ep, in_req);
>  	ret = usb_ep_queue(rockusb_func->in_ep, in_req, 0);
>  	if (ret)
> @@ -434,6 +435,79 @@ static unsigned int rx_bytes_expected(struct usb_ep *ep)
>  	return rx_remain;
>  }
>  
> +/* usb_request complete call back to handle upload image */
> +static void tx_handler_ul_image(struct usb_ep *ep, struct usb_request *req)

Could you use another name like '_rl_' instead of '_ul_', and since
there is a prefix 'tx',
maybe we don't need this '_ul_'? Because there is a rockusb cmd 'UL' or
'ul' means
'upgrade loader'.

> +{
> +#define RBUFFER_SIZE	4096
You can use the same size for TX and RX buffer.

BTW: I don't like the design of the return value here, there should
always have return
value instead of void, many error cat may happen during the TX.

Thanks,
- Kever
> +	ALLOC_CACHE_ALIGN_BUFFER(char, rbuffer, RBUFFER_SIZE);
> +	struct f_rockusb *f_rkusb = get_rkusb();
> +	struct usb_request *in_req = rockusb_func->in_req;
> +	int ret;
> +
> +	if (!f_rkusb->desc) {
> +		char *type = f_rkusb->dev_type;
> +		int index = f_rkusb->dev_index;
> +
> +		f_rkusb->desc = blk_get_dev(type, index);
> +		if (!f_rkusb->desc ||
> +		    f_rkusb->desc->type == DEV_TYPE_UNKNOWN) {
> +			puts("invalid mmc device\n");
> +			rockusb_tx_write_csw(f_rkusb->tag, 0, CSW_FAIL,
> +					     USB_BULK_CS_WRAP_LEN);
> +			return;
> +		}
> +	}
> +
> +	/* Print error status of previous transfer */
> +	if (req->status)
> +		debug("status: %d ep '%s' trans: %d len %d\n", req->status,
> +		      ep->name, req->actual, req->length);
> +
> +	/* On transfer complete reset in_req and feedback host with CSW_GOOD */
> +	if (f_rkusb->ul_bytes >= f_rkusb->ul_size) {
> +		in_req->length = 0;
> +		in_req->complete = rockusb_complete;
> +
> +		rockusb_tx_write_csw(f_rkusb->tag, 0, CSW_GOOD,
> +				     USB_BULK_CS_WRAP_LEN);
> +		return;
> +	}
> +
> +	/* Proceed with current chunk */
> +	unsigned int transfer_size = f_rkusb->ul_size - f_rkusb->ul_bytes;
> +
> +	if (transfer_size > RBUFFER_SIZE)
> +		transfer_size = RBUFFER_SIZE;
> +	/* Read at least one block */
> +	unsigned int blkcount = (transfer_size + 511) / 512;
> +
> +	debug("ul %x bytes, %x blks, read lba %x, ul_size:%x, ul_bytes:%x, ",
> +	      transfer_size, blkcount, f_rkusb->lba,
> +	      f_rkusb->ul_size, f_rkusb->ul_bytes);
> +
> +	int blks = blk_dread(f_rkusb->desc, f_rkusb->lba, blkcount, rbuffer);
> +
> +	if (blks != blkcount) {
> +		printf("failed reading from device %s: %d\n",
> +		       f_rkusb->dev_type, f_rkusb->dev_index);
> +		rockusb_tx_write_csw(f_rkusb->tag, 0, CSW_FAIL,
> +				     USB_BULK_CS_WRAP_LEN);
> +		return;
> +	}
> +	f_rkusb->lba += blkcount;
> +	f_rkusb->ul_bytes += transfer_size;
> +
> +	/* Proceed with USB request */
> +	memcpy(in_req->buf, rbuffer, transfer_size);
> +	in_req->length = transfer_size;
> +	in_req->complete = tx_handler_ul_image;
> +	printf("Uploading 0x%x bytes\n", transfer_size);
> +	usb_ep_dequeue(rockusb_func->in_ep, in_req);
> +	ret = usb_ep_queue(rockusb_func->in_ep, in_req, 0);
> +	if (ret)
> +		printf("Error %d on queue\n", ret);
> +}
> +
>  /* usb_request complete call back to handle down load image */
>  static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req)
>  {
> @@ -568,6 +642,32 @@ static void cb_get_chip_version(struct usb_ep *ep, struct usb_request *req)
>  					 CSW_GOOD);
>  }
>  
> +static void cb_read_lba(struct usb_ep *ep, struct usb_request *req)
> +{
> +	ALLOC_CACHE_ALIGN_BUFFER(struct fsg_bulk_cb_wrap, cbw,
> +				 sizeof(struct fsg_bulk_cb_wrap));
> +	struct f_rockusb *f_rkusb = get_rkusb();
> +	int sector_count;
> +
> +	memcpy((char *)cbw, req->buf, USB_BULK_CB_WRAP_LEN);
> +	sector_count = (int)get_unaligned_be16(&cbw->CDB[7]);
> +	f_rkusb->lba = get_unaligned_be32(&cbw->CDB[2]);
> +	f_rkusb->ul_size = sector_count * 512;
> +	f_rkusb->ul_bytes = 0;
> +	f_rkusb->tag = cbw->tag;
> +	debug("require read %x bytes, %x sectors from lba %x\n",
> +	      f_rkusb->ul_size, sector_count, f_rkusb->lba);
> +
> +	if (f_rkusb->ul_size == 0)  {
> +		rockusb_tx_write_csw(cbw->tag, cbw->data_transfer_length,
> +				     CSW_FAIL, USB_BULK_CS_WRAP_LEN);
> +		return;
> +	}
> +
> +	/* Start right now sending first chunk */
> +	tx_handler_ul_image(ep, req);
> +}
> +
>  static void cb_write_lba(struct usb_ep *ep, struct usb_request *req)
>  {
>  	ALLOC_CACHE_ALIGN_BUFFER(struct fsg_bulk_cb_wrap, cbw,
> @@ -678,7 +778,7 @@ static const struct cmd_dispatch_info cmd_dispatch_info[] = {
>  	},
>  	{
>  		.cmd = K_FW_LBA_READ_10,
> -		.cb = cb_not_support,
> +		.cb = cb_read_lba,
>  	},
>  	{
>  		.cmd = K_FW_LBA_WRITE_10,




More information about the U-Boot mailing list