[U-Boot] [PATCH v2 04/29] binman: Correct operation of ObtainContents()

Simon Glass sjg at chromium.org
Fri Jul 6 16:27:17 UTC 2018


This method is supposed to return the contents of an entry. However at
present there is no check that it actually does. Also some implementations
do not return 'True' to indicate success, as required.

Add a check for things working as expected, and correct the
implementations.

This requires some additional test cases to cover things which were missed
originally. Add these at the same time.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v2: None

 tools/binman/bsection.py                      |  4 ++
 tools/binman/etype/_testing.py                |  5 ++
 tools/binman/etype/section.py                 |  2 +-
 tools/binman/etype/u_boot_spl_bss_pad.py      |  1 +
 tools/binman/etype/u_boot_ucode.py            |  9 ++-
 tools/binman/ftest.py                         | 57 +++++++++++++++----
 tools/binman/test/57_unknown_contents.dts     | 14 +++++
 .../test/58_x86_ucode_spl_needs_retry.dts     | 36 ++++++++++++
 8 files changed, 114 insertions(+), 14 deletions(-)
 create mode 100644 tools/binman/test/57_unknown_contents.dts
 create mode 100644 tools/binman/test/58_x86_ucode_spl_needs_retry.dts

diff --git a/tools/binman/bsection.py b/tools/binman/bsection.py
index 3f30f6e4fe..06a6711350 100644
--- a/tools/binman/bsection.py
+++ b/tools/binman/bsection.py
@@ -162,6 +162,10 @@ class Section(object):
             todo = next_todo
             if not todo:
                 break
+        if todo:
+            self._Raise('Internal error: Could not complete processing of '
+                        'contents: remaining %s' % todo)
+        return True
 
     def _SetEntryPosSize(self, name, pos, size):
         """Set the position and size of an entry
diff --git a/tools/binman/etype/_testing.py b/tools/binman/etype/_testing.py
index 0b1eaefc3c..c075c3ff0d 100644
--- a/tools/binman/etype/_testing.py
+++ b/tools/binman/etype/_testing.py
@@ -9,6 +9,7 @@ from entry import Entry
 import fdt_util
 import tools
 
+
 class Entry__testing(Entry):
     """A fake entry used for testing
 
@@ -19,8 +20,12 @@ class Entry__testing(Entry):
         Entry.__init__(self, section, etype, node)
         self.return_invalid_entry = fdt_util.GetBool(self._node,
                                                      'return-invalid-entry')
+        self.return_unknown_contents = fdt_util.GetBool(self._node,
+                                                     'return-unknown-contents')
 
     def ObtainContents(self):
+        if self.return_unknown_contents:
+            return False
         self.data = 'a'
         self.contents_size = len(self.data)
         return True
diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py
index 139fcad51a..36b31a849f 100644
--- a/tools/binman/etype/section.py
+++ b/tools/binman/etype/section.py
@@ -18,7 +18,7 @@ class Entry_section(Entry):
         self._section = bsection.Section(node.name, node)
 
     def ObtainContents(self):
-        self._section.GetEntryContents()
+        return self._section.GetEntryContents()
 
     def GetData(self):
         return self._section.GetData()
diff --git a/tools/binman/etype/u_boot_spl_bss_pad.py b/tools/binman/etype/u_boot_spl_bss_pad.py
index 3d2dea2e0d..6c397957e3 100644
--- a/tools/binman/etype/u_boot_spl_bss_pad.py
+++ b/tools/binman/etype/u_boot_spl_bss_pad.py
@@ -24,3 +24,4 @@ class Entry_u_boot_spl_bss_pad(Entry_blob):
             self.Raise('Expected __bss_size symbol in spl/u-boot-spl')
         self.data = chr(0) * bss_size
         self.contents_size = bss_size
+        return True
diff --git a/tools/binman/etype/u_boot_ucode.py b/tools/binman/etype/u_boot_ucode.py
index 3a0cff7c3a..8cae7deed3 100644
--- a/tools/binman/etype/u_boot_ucode.py
+++ b/tools/binman/etype/u_boot_ucode.py
@@ -64,9 +64,14 @@ class Entry_u_boot_ucode(Entry_blob):
             self.data = ''
             return True
 
-        # Get the microcode from the device tree entry
+        # Get the microcode from the device tree entry. If it is not available
+        # yet, return False so we will be called later. If the section simply
+        # doesn't exist, then we may as well return True, since we are going to
+        # get an error anyway.
         fdt_entry = self.section.FindEntryType('u-boot-dtb-with-ucode')
-        if not fdt_entry or not fdt_entry.ucode_data:
+        if not fdt_entry:
+            return True
+        if not fdt_entry.ucode_data:
             return False
 
         if not fdt_entry.collate:
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 80eadeffab..ca9d158eef 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -688,12 +688,14 @@ class TestFunctional(unittest.TestCase):
         data = self._DoReadFile('33_x86-start16.dts')
         self.assertEqual(X86_START16_DATA, data[:len(X86_START16_DATA)])
 
-    def _RunMicrocodeTest(self, dts_fname, nodtb_data):
+    def _RunMicrocodeTest(self, dts_fname, nodtb_data, ucode_second=False):
         """Handle running a test for insertion of microcode
 
         Args:
             dts_fname: Name of test .dts file
             nodtb_data: Data that we expect in the first section
+            ucode_second: True if the microsecond entry is second instead of
+                third
 
         Returns:
             Tuple:
@@ -704,10 +706,16 @@ class TestFunctional(unittest.TestCase):
         data = self._DoReadFile(dts_fname, True)
 
         # Now check the device tree has no microcode
-        dtb_with_ucode = data[len(nodtb_data):]
-        fdt_len = self.GetFdtLen(dtb_with_ucode)
-        ucode_content = dtb_with_ucode[fdt_len:]
-        ucode_pos = len(nodtb_data) + fdt_len
+        if ucode_second:
+            ucode_content = data[len(nodtb_data):]
+            ucode_pos = len(nodtb_data)
+            dtb_with_ucode = ucode_content[16:]
+            fdt_len = self.GetFdtLen(dtb_with_ucode)
+        else:
+            dtb_with_ucode = data[len(nodtb_data):]
+            fdt_len = self.GetFdtLen(dtb_with_ucode)
+            ucode_content = dtb_with_ucode[fdt_len:]
+            ucode_pos = len(nodtb_data) + fdt_len
         fname = tools.GetOutputFilename('test.dtb')
         with open(fname, 'wb') as fd:
             fd.write(dtb_with_ucode)
@@ -728,8 +736,8 @@ class TestFunctional(unittest.TestCase):
         # expected position and size
         pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos,
                                    len(ucode_data))
-        first = data[:len(nodtb_data)]
-        return first, pos_and_size
+        u_boot = data[:len(nodtb_data)]
+        return u_boot, pos_and_size
 
     def testPackUbootMicrocode(self):
         """Test that x86 microcode can be handled correctly
@@ -892,23 +900,42 @@ class TestFunctional(unittest.TestCase):
         data = self._DoReadFile('48_x86-start16-spl.dts')
         self.assertEqual(X86_START16_SPL_DATA, data[:len(X86_START16_SPL_DATA)])
 
-    def testPackUbootSplMicrocode(self):
-        """Test that x86 microcode can be handled correctly in SPL
+    def _PackUbootSplMicrocode(self, dts, ucode_second=False):
+        """Helper function for microcode tests
 
         We expect to see the following in the image, in order:
             u-boot-spl-nodtb.bin with a microcode pointer inserted at the
                 correct place
             u-boot.dtb with the microcode removed
             the microcode
+
+        Args:
+            dts: Device tree file to use for test
+            ucode_second: True if the microsecond entry is second instead of
+                third
         """
         # ELF file with a '_dt_ucode_base_size' symbol
         with open(self.TestFile('u_boot_ucode_ptr')) as fd:
             TestFunctional._MakeInputFile('spl/u-boot-spl', fd.read())
-        first, pos_and_size = self._RunMicrocodeTest('49_x86_ucode_spl.dts',
-                                                     U_BOOT_SPL_NODTB_DATA)
+        first, pos_and_size = self._RunMicrocodeTest(dts, U_BOOT_SPL_NODTB_DATA,
+                                                     ucode_second=ucode_second)
         self.assertEqual('splnodtb with microc' + pos_and_size +
                          'ter somewhere in here', first)
 
+    def testPackUbootSplMicrocode(self):
+        """Test that x86 microcode can be handled correctly in SPL"""
+        self._PackUbootSplMicrocode('49_x86_ucode_spl.dts')
+
+    def testPackUbootSplMicrocodeReorder(self):
+        """Test that order doesn't matter for microcode entries
+
+        This is the same as testPackUbootSplMicrocode but when we process the
+        u-boot-ucode entry we have not yet seen the u-boot-dtb-with-ucode
+        entry, so we reply on binman to try later.
+        """
+        self._PackUbootSplMicrocode('58_x86_ucode_spl_needs_retry.dts',
+                                    ucode_second=True)
+
     def testPackMrc(self):
         """Test that an image with an MRC binary can be created"""
         data = self._DoReadFile('50_intel_mrc.dts')
@@ -971,5 +998,13 @@ class TestFunctional(unittest.TestCase):
  00000000  00000004  rw-u-boot
 ''', map_data)
 
+    def testUnknownContents(self):
+        """Test that obtaining the contents works as expected"""
+        with self.assertRaises(ValueError) as e:
+            self._DoReadFile('57_unknown_contents.dts', True)
+        self.assertIn("Section '/binman': Internal error: Could not complete "
+                "processing of contents: remaining [<_testing.Entry__testing ",
+                str(e.exception))
+
 if __name__ == "__main__":
     unittest.main()
diff --git a/tools/binman/test/57_unknown_contents.dts b/tools/binman/test/57_unknown_contents.dts
new file mode 100644
index 0000000000..6ea98d7cab
--- /dev/null
+++ b/tools/binman/test/57_unknown_contents.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	binman {
+		_testing {
+			return-unknown-contents;
+		};
+	};
+};
diff --git a/tools/binman/test/58_x86_ucode_spl_needs_retry.dts b/tools/binman/test/58_x86_ucode_spl_needs_retry.dts
new file mode 100644
index 0000000000..e2cb80cf6e
--- /dev/null
+++ b/tools/binman/test/58_x86_ucode_spl_needs_retry.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	binman {
+		sort-by-pos;
+		end-at-4gb;
+		size = <0x200>;
+		u-boot-spl-with-ucode-ptr {
+		};
+
+		/*
+		 * Microcode goes before the DTB which contains it, so binman
+		 * will need to obtain the contents of the next section before
+		 * obtaining the contents of this one.
+		 */
+		u-boot-ucode {
+		};
+
+		u-boot-dtb-with-ucode {
+		};
+	};
+
+	microcode {
+		update at 0 {
+			data = <0x12345678 0x12345679>;
+		};
+		update at 1 {
+			data = <0xabcd0000 0x78235609>;
+		};
+	};
+};
-- 
2.18.0.203.gfac676dfb9-goog



More information about the U-Boot mailing list