[U-Boot] [linux-sunxi] [PATCH v2 00/13] Allwinner H6 support (w/ SPL)

[Jagan Teki]

On Sun, Jul 29, 2018 at 6:54 PM, Icenowy Zheng <icenowy at aosc.io> wrote:
> 在 2018-07-27五的 18:48 +0530，Jagan Teki写道：
>> On Thu, Jul 26, 2018 at 12:35 PM, Icenowy Zheng <icenowy at aosc.io>
>> wrote:
>> >
>> >
>> > 于 2018年7月26日 GMT+08:00 下午3:02:50, Jagan Teki <
>> > jagan at amarulasolutions.com> 写到:
>> > > On Sat, Jul 21, 2018 at 1:50 PM, Icenowy Zheng <icenowy at aosc.io>
>> > > wrote:
>> > > > This patchset trys to add support for Allwinner H6 SoC to U-
>> > > > Boot.
>> > > >
>> > > > Allwinner H6 is a quite new Allwinner SoC, with several parts
>> > > > changed
>> > >
>> > > a
>> > > > lot (memory map, DRAM controller, CCU, so on). The position
>> > > > which SPL
>> > > > will be loaded (SRAM A1) also changed to 0x20000.
>> > > >
>> > > > The Pine H64 board support comes with this patchset, as this is
>> > > > the
>> > > > first H6 board that I can get (being early bird).
>> > > >
>> > > > Icenowy Zheng (13):
>> > > >   sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS
>> > > >   sunxi: add basic memory map definitions of H6 SoC
>> > > >   sunxi: change RMR64's RVBAR address for H6
>> > > >   sunxi: change ATF position for H6
>> > > >   sunxi: add config for SPL at 0x20000 on H6
>> > > >   sunxi: change GIC address on H6
>> > > >   sunxi: add clock code for H6
>> > > >   sunxi: use sun6i-style watchdog for H6
>> > > >   sunxi: add UART0 setup for H6
>> > > >   sunxi: add MMC support for H6
>> > > >   sunxi: add DRAM support to H6
>> > > >   sunxi: add support for Allwinner H6 SoC
>> > > >   sunxi: add support for Pine H64 board
>>
>> Reviewed-by: Jagan Teki <jagan at openedev.com>
>
> Do you consider merge it now?

Yes, but there is a comment about kconfig move [1], I'm OK to send the
change later since it can effect all SoC. what do you think?

[1] https://patchwork.ozlabs.org/patch/947290/