[U-Boot] [linux-sunxi] [PATCH v2 00/13] Allwinner H6 support (w/ SPL)

[Jagan Teki]

On Tue, Jul 31, 2018 at 11:24 AM, Icenowy Zheng <icenowy at aosc.io> wrote:
>
>
> 于 2018年7月31日 GMT+08:00 下午1:49:18, Jagan Teki <jagan at amarulasolutions.com> 写到:
>>On Tue, Jul 31, 2018 at 11:15 AM, Icenowy Zheng <icenowy at aosc.io>
>>wrote:
>>>
>>>
>>> 于 2018年7月31日 GMT+08:00 下午1:42:46, Jagan Teki
>><jagan at amarulasolutions.com> 写到:
>>>>On Sun, Jul 29, 2018 at 6:54 PM, Icenowy Zheng <icenowy at aosc.io>
>>wrote:
>>>>> 在 2018-07-27五的 18:48 +0530，Jagan Teki写道：
>>>>>> On Thu, Jul 26, 2018 at 12:35 PM, Icenowy Zheng <icenowy at aosc.io>
>>>>>> wrote:
>>>>>> >
>>>>>> >
>>>>>> > 于 2018年7月26日 GMT+08:00 下午3:02:50, Jagan Teki <
>>>>>> > jagan at amarulasolutions.com> 写到:
>>>>>> > > On Sat, Jul 21, 2018 at 1:50 PM, Icenowy Zheng
>><icenowy at aosc.io>
>>>>>> > > wrote:
>>>>>> > > > This patchset trys to add support for Allwinner H6 SoC to U-
>>>>>> > > > Boot.
>>>>>> > > >
>>>>>> > > > Allwinner H6 is a quite new Allwinner SoC, with several
>>parts
>>>>>> > > > changed
>>>>>> > >
>>>>>> > > a
>>>>>> > > > lot (memory map, DRAM controller, CCU, so on). The position
>>>>>> > > > which SPL
>>>>>> > > > will be loaded (SRAM A1) also changed to 0x20000.
>>>>>> > > >
>>>>>> > > > The Pine H64 board support comes with this patchset, as this
>>>>is
>>>>>> > > > the
>>>>>> > > > first H6 board that I can get (being early bird).
>>>>>> > > >
>>>>>> > > > Icenowy Zheng (13):
>>>>>> > > >   sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS
>>>>>> > > >   sunxi: add basic memory map definitions of H6 SoC
>>>>>> > > >   sunxi: change RMR64's RVBAR address for H6
>>>>>> > > >   sunxi: change ATF position for H6
>>>>>> > > >   sunxi: add config for SPL at 0x20000 on H6
>>>>>> > > >   sunxi: change GIC address on H6
>>>>>> > > >   sunxi: add clock code for H6
>>>>>> > > >   sunxi: use sun6i-style watchdog for H6
>>>>>> > > >   sunxi: add UART0 setup for H6
>>>>>> > > >   sunxi: add MMC support for H6
>>>>>> > > >   sunxi: add DRAM support to H6
>>>>>> > > >   sunxi: add support for Allwinner H6 SoC
>>>>>> > > >   sunxi: add support for Pine H64 board
>>>>>>
>>>>>> Reviewed-by: Jagan Teki <jagan at openedev.com>
>>>>>
>>>>> Do you consider merge it now?
>>>>
>>>>Yes, but there is a comment about kconfig move [1], I'm OK to send
>>the
>>>>change later since it can effect all SoC.
>>>
>>> Yes I suppose so.
>>
>>Thanks.
>>
>>>
>>> Also apply for the DM MMC change.
>>
>>Which change, can you point?
>
> Migrate MMC driver to DM (currently the DM sunxi_mmc driver
> part only work for A10/13/20)

Yes I will add H6 changes as part of this series in next version.

[2] https://patchwork.ozlabs.org/cover/944180/