[U-Boot] [linux-sunxi] [PATCH v2 00/13] Allwinner H6 support (w/ SPL)

[Icenowy Zheng]

于 2018年7月31日 GMT+08:00 下午1:57:45, Jagan Teki <jagan at amarulasolutions.com> 写到:
>On Tue, Jul 31, 2018 at 11:24 AM, Icenowy Zheng <icenowy at aosc.io>
>wrote:
>>
>>
>> 于 2018年7月31日 GMT+08:00 下午1:49:18, Jagan Teki
><jagan at amarulasolutions.com> 写到:
>>>On Tue, Jul 31, 2018 at 11:15 AM, Icenowy Zheng <icenowy at aosc.io>
>>>wrote:
>>>>
>>>>
>>>> 于 2018年7月31日 GMT+08:00 下午1:42:46, Jagan Teki
>>><jagan at amarulasolutions.com> 写到:
>>>>>On Sun, Jul 29, 2018 at 6:54 PM, Icenowy Zheng <icenowy at aosc.io>
>>>wrote:
>>>>>> 在 2018-07-27五的 18:48 +0530，Jagan Teki写道：
>>>>>>> On Thu, Jul 26, 2018 at 12:35 PM, Icenowy Zheng
><icenowy at aosc.io>
>>>>>>> wrote:
>>>>>>> >
>>>>>>> >
>>>>>>> > 于 2018年7月26日 GMT+08:00 下午3:02:50, Jagan Teki <
>>>>>>> > jagan at amarulasolutions.com> 写到:
>>>>>>> > > On Sat, Jul 21, 2018 at 1:50 PM, Icenowy Zheng
>>><icenowy at aosc.io>
>>>>>>> > > wrote:
>>>>>>> > > > This patchset trys to add support for Allwinner H6 SoC to
>U-
>>>>>>> > > > Boot.
>>>>>>> > > >
>>>>>>> > > > Allwinner H6 is a quite new Allwinner SoC, with several
>>>parts
>>>>>>> > > > changed
>>>>>>> > >
>>>>>>> > > a
>>>>>>> > > > lot (memory map, DRAM controller, CCU, so on). The
>position
>>>>>>> > > > which SPL
>>>>>>> > > > will be loaded (SRAM A1) also changed to 0x20000.
>>>>>>> > > >
>>>>>>> > > > The Pine H64 board support comes with this patchset, as
>this
>>>>>is
>>>>>>> > > > the
>>>>>>> > > > first H6 board that I can get (being early bird).
>>>>>>> > > >
>>>>>>> > > > Icenowy Zheng (13):
>>>>>>> > > >   sunxi: change SUNXI_HIGH_SRAM option to
>SUNXI_SRAM_ADDRESS
>>>>>>> > > >   sunxi: add basic memory map definitions of H6 SoC
>>>>>>> > > >   sunxi: change RMR64's RVBAR address for H6
>>>>>>> > > >   sunxi: change ATF position for H6
>>>>>>> > > >   sunxi: add config for SPL at 0x20000 on H6
>>>>>>> > > >   sunxi: change GIC address on H6
>>>>>>> > > >   sunxi: add clock code for H6
>>>>>>> > > >   sunxi: use sun6i-style watchdog for H6
>>>>>>> > > >   sunxi: add UART0 setup for H6
>>>>>>> > > >   sunxi: add MMC support for H6
>>>>>>> > > >   sunxi: add DRAM support to H6
>>>>>>> > > >   sunxi: add support for Allwinner H6 SoC
>>>>>>> > > >   sunxi: add support for Pine H64 board
>>>>>>>
>>>>>>> Reviewed-by: Jagan Teki <jagan at openedev.com>
>>>>>>
>>>>>> Do you consider merge it now?
>>>>>
>>>>>Yes, but there is a comment about kconfig move [1], I'm OK to send
>>>the
>>>>>change later since it can effect all SoC.
>>>>
>>>> Yes I suppose so.
>>>
>>>Thanks.
>>>
>>>>
>>>> Also apply for the DM MMC change.
>>>
>>>Which change, can you point?
>>
>> Migrate MMC driver to DM (currently the DM sunxi_mmc driver
>> part only work for A10/13/20)
>
>Yes I will add H6 changes as part of this series in next version.

Thanks for taking it!

>
>[2] https://patchwork.ozlabs.org/cover/944180/