[U-Boot] [PATCH 2/2] ARM: kirkwood: SBx81LIFKW: Enable network hardware

Stefan Roese sr at denx.de
Mon Jun 4 06:18:56 UTC 2018


On 03.06.2018 06:21, Chris Packham wrote:
> The SBx81LIFKW boards connect to the internal chassis management network
> via a Marvell 88e6097 L2 switch. The chassis connections are direct
> serdes on ports 8 and 9 with a RGMII interface on port 10 connected to
> the CPU MAC.
> 
> For debugging purposes ports 0 and 1 are also taken out to headers on
> the board. Because the debug interfaces are sometimes connected to with
> straight ribbon cables we need to run them at 10Mbps.
> 
> Signed-off-by: Chris Packham <judge.packham at gmail.com>
> ---
> 
>   board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c | 14 ++++++++++++--
>   configs/SBx81LIFKW_defconfig                |  6 ++++++
>   include/configs/SBx81LIFKW.h                |  5 -----
>   3 files changed, 18 insertions(+), 7 deletions(-)

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan


More information about the U-Boot mailing list