[U-Boot] [PATCH 2/2] ARM: kirkwood: SBx81LIFKW: Enable network hardware

[Stefan Roese]

On 03.06.2018 06:21, Chris Packham wrote:
> The SBx81LIFKW boards connect to the internal chassis management network
> via a Marvell 88e6097 L2 switch. The chassis connections are direct
> serdes on ports 8 and 9 with a RGMII interface on port 10 connected to
> the CPU MAC.
> 
> For debugging purposes ports 0 and 1 are also taken out to headers on
> the board. Because the debug interfaces are sometimes connected to with
> straight ribbon cables we need to run them at 10Mbps.
> 
> Signed-off-by: Chris Packham <judge.packham at gmail.com>

Applied to u-boot-marvell/master.

Thanks,
Stefan