[U-Boot] [PATCH 1/2] dra7/am5: remove CEC pin pull-up

[Tomi Valkeinen]

HDMI CEC pins are set to pull-up, but CEC requires no pull. Fix this.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
 board/ti/am57xx/mux_data.h | 6 +++---
 board/ti/dra7xx/mux_data.h | 8 ++++----
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/board/ti/am57xx/mux_data.h b/board/ti/am57xx/mux_data.h
index 4deaddc914..d4a15ae93d 100644
--- a/board/ti/am57xx/mux_data.h
+++ b/board/ti/am57xx/mux_data.h
@@ -196,7 +196,7 @@ const struct pad_conf_entry core_padconf_array_essential_x15[] = {
 	{SPI1_CS0, (M14 | PIN_INPUT)},	/* spi1_cs0.gpio7_10 */
 	{SPI1_CS1, (M14 | PIN_INPUT)},	/* spi1_cs1.gpio7_11 */
 	{SPI1_CS2, (M14 | PIN_INPUT_SLEW)},	/* spi1_cs2.gpio7_12 */
-	{SPI1_CS3, (M6 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
+	{SPI1_CS3, (M6 | PIN_INPUT | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
 	{SPI2_SCLK, (M14 | PIN_INPUT_PULLDOWN)},	/* spi2_sclk.gpio7_14 */
 	{SPI2_D1, (M14 | PIN_INPUT_SLEW)},	/* spi2_d1.gpio7_15 */
 	{SPI2_D0, (M14 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* spi2_d0.gpio7_16 */
@@ -481,7 +481,7 @@ const struct pad_conf_entry core_padconf_array_essential_am574x_idk[] = {
 	{SPI1_CS0, (M14 | PIN_OUTPUT)},	/* spi1_cs0.gpio7_10 */
 	{SPI1_CS1, (M14 | PIN_OUTPUT)},	/* spi1_cs1.gpio7_11 */
 	{SPI1_CS2, (M14 | PIN_INPUT_SLEW)},	/* spi1_cs2.gpio7_12 */
-	{SPI1_CS3, (M6 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
+	{SPI1_CS3, (M6 | PIN_INPUT | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
 	{SPI2_SCLK, (M0 | PIN_INPUT)},	/* spi2_sclk.spi2_sclk */
 	{SPI2_D1, (M0 | PIN_INPUT | SLEWCONTROL)},	/* spi2_d1.spi2_d1 */
 	{SPI2_D0, (M0 | PIN_INPUT | SLEWCONTROL)},	/* spi2_d0.spi2_d0 */
@@ -701,7 +701,7 @@ const struct pad_conf_entry core_padconf_array_essential_am572x_idk[] = {
 	{SPI1_CS0, (M14 | PIN_OUTPUT)},	/* spi1_cs0.gpio7_10 */
 	{SPI1_CS1, (M14 | PIN_OUTPUT)},	/* spi1_cs1.gpio7_11 */
 	{SPI1_CS2, (M14 | PIN_INPUT_SLEW)},	/* spi1_cs2.gpio7_12 */
-	{SPI1_CS3, (M6 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
+	{SPI1_CS3, (M6 | PIN_INPUT | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
 	{SPI2_SCLK, (M0 | PIN_INPUT)},	/* spi2_sclk.spi2_sclk */
 	{SPI2_D1, (M0 | PIN_INPUT | SLEWCONTROL)},	/* spi2_d1.spi2_d1 */
 	{SPI2_D0, (M0 | PIN_INPUT | SLEWCONTROL)},	/* spi2_d0.spi2_d0 */
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 72355e801b..7624152afb 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -139,7 +139,7 @@ const struct pad_conf_entry dra72x_core_padconf_array_common[] = {
 	{SPI1_CS0, (M0 | PIN_INPUT_PULLUP)},	/* spi1_cs0.spi1_cs0 */
 	{SPI1_CS1, (M14 | PIN_OUTPUT)},	/* spi1_cs1.gpio7_11 */
 	{SPI1_CS2, (M14 | PIN_INPUT_PULLDOWN)},	/* spi1_cs2.gpio7_12 */
-	{SPI1_CS3, (M6 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
+	{SPI1_CS3, (M6 | PIN_INPUT | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
 	{SPI2_SCLK, (M1 | PIN_INPUT_PULLDOWN)},	/* spi2_sclk.uart3_rxd */
 	{SPI2_D1, (M1 | PIN_INPUT_SLEW)},	/* spi2_d1.uart3_txd */
 	{SPI2_D0, (M1 | PIN_INPUT_SLEW)},	/* spi2_d0.uart3_ctsn */
@@ -349,7 +349,7 @@ const struct pad_conf_entry dra71x_core_padconf_array[] = {
 	{SPI1_CS0, (M0 | PIN_INPUT_PULLUP)},	/* spi1_cs0.spi1_cs0 */
 	{SPI1_CS1, (M14 | PIN_INPUT_PULLUP)},	/* spi1_cs1.gpio7_11 */
 	{SPI1_CS2, (M14 | PIN_INPUT_PULLDOWN)},	/* spi1_cs2.gpio7_12 */
-	{SPI1_CS3, (M6 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
+	{SPI1_CS3, (M6 | PIN_INPUT | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
 	{SPI2_SCLK, (M1 | PIN_INPUT_PULLDOWN)},	/* spi2_sclk.uart3_rxd */
 	{SPI2_D1, (M1 | PIN_INPUT_SLEW)},	/* spi2_d1.uart3_txd */
 	{SPI2_D0, (M1 | PIN_INPUT_SLEW)},	/* spi2_d0.uart3_ctsn */
@@ -673,7 +673,7 @@ const struct pad_conf_entry dra74x_core_padconf_array[] = {
 	{SPI1_CS0, (M0 | PIN_INPUT_PULLUP)},	/* spi1_cs0.spi1_cs0 */
 	{SPI1_CS1, (M14 | PIN_OUTPUT)},		/* spi1_cs1.gpio7_11 */
 	{SPI1_CS2, (M14 | PIN_INPUT_PULLDOWN)},	/* spi1_cs2.gpio7_12 */
-	{SPI1_CS3, (M6 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
+	{SPI1_CS3, (M6 | PIN_INPUT | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
 	{SPI2_SCLK, (M1 | PIN_INPUT_PULLDOWN)},	/* spi2_sclk.uart3_rxd */
 	{SPI2_D1, (M1 | PIN_INPUT_SLEW)},	/* spi2_d1.uart3_txd */
 	{SPI2_D0, (M1 | PIN_INPUT_SLEW)},	/* spi2_d0.uart3_ctsn */
@@ -859,7 +859,7 @@ const struct pad_conf_entry dra76x_core_padconf_array[] = {
 	{SPI1_D0, (M0 | PIN_INPUT_PULLDOWN)},	/* spi1_d0.spi1_d0 */
 	{SPI1_CS0, (M0 | PIN_INPUT_PULLUP)},	/* spi1_cs0.spi1_cs0 */
 	{SPI1_CS2, (M6 | 0x000f0000)},	/* spi1_cs2.hdmi1_hpd */
-	{SPI1_CS3, (M6 | 0x000f0000)},	/* spi1_cs3.hdmi1_cec */
+	{SPI1_CS3, (M6 | PIN_INPUT | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
 	{SPI2_SCLK, (M1 | PIN_INPUT_PULLDOWN)},	/* spi2_sclk.uart3_rxd */
 	{SPI2_D1, (M1 | PIN_INPUT_SLEW)},	/* spi2_d1.uart3_txd */
 	{SPI2_D0, (M1 | PIN_INPUT_SLEW)},	/* spi2_d0.uart3_ctsn */
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki