[U-Boot] [PATCH 2/2] dra76: fix HDMI HPD pinmux

[Tomi Valkeinen]

The pin used for HDMI HPD should be set to GPIO mode on DRA76, similarly
to all the other DRA7 and AM5 SoCs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
 board/ti/dra7xx/mux_data.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 7624152afb..f1f6bd5316 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -858,7 +858,7 @@ const struct pad_conf_entry dra76x_core_padconf_array[] = {
 	{SPI1_D1, (M0 | PIN_INPUT_PULLDOWN)},	/* spi1_d1.spi1_d1 */
 	{SPI1_D0, (M0 | PIN_INPUT_PULLDOWN)},	/* spi1_d0.spi1_d0 */
 	{SPI1_CS0, (M0 | PIN_INPUT_PULLUP)},	/* spi1_cs0.spi1_cs0 */
-	{SPI1_CS2, (M6 | 0x000f0000)},	/* spi1_cs2.hdmi1_hpd */
+	{SPI1_CS2, (M14 | PIN_INPUT_PULLDOWN)},	/* spi1_cs2.gpio7_12 */
 	{SPI1_CS3, (M6 | PIN_INPUT | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
 	{SPI2_SCLK, (M1 | PIN_INPUT_PULLDOWN)},	/* spi2_sclk.uart3_rxd */
 	{SPI2_D1, (M1 | PIN_INPUT_SLEW)},	/* spi2_d1.uart3_txd */
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki