[U-Boot] [PATCH v5 0/5] drivers: Add reset ctrl to drivers

[Simon Glass]

Hi Ley Foon,

On 3 June 2018 at 23:19, Ley Foon Tan <ley.foon.tan at intel.com> wrote:
> Add reset ctrl to dwmmc socfpga, designware Ethernet and ns16550 serial drivers.
>
> A reset property is an optional feature, so only print out a warning and
> do not fail if a reset property is not present.
>
> If a reset property is discovered, then use it to deassert, thus bringing the
> IP out of reset.
>
> v5 change:
> - Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET
> - Change to use CONFIG_IS_ENABLED(DM_RESET) in reset.h
> - Added Simon's Reviewed-by in dwmmc, 16550 serial and designware emac patches.

I think it is better to also include the earlier change logs, Also you
should have a change log on each patch as well as the cover letter.

The patman tool does this for you, so I suggest you take a look at that.

>
> History:
> v1: https://patchwork.ozlabs.org/cover/905519/
> v2: https://patchwork.ozlabs.org/cover/908667/
> v3: https://patchwork.ozlabs.org/cover/910018/
> v4: https://patchwork.ozlabs.org/cover/923883/
>
> Ley Foon Tan (5):
>   reset: Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET
>   include: reset: Change to use CONFIG_IS_ENABLED(DM_RESET)
>   mmc: dwmmc: socfpga: Add reset ctrl to driver
>   serial: ns16550: Add reset ctrl to driver
>   net: designware: Add reset ctrl to driver
>
>  arch/arm/mach-stm32mp/Kconfig |  2 +-
>  common/spl/Kconfig            |  2 +-
>  drivers/Makefile              |  2 +-
>  drivers/mmc/socfpga_dw_mmc.c  | 17 +++++++++++++++++
>  drivers/net/designware.c      |  8 ++++++++
>  drivers/serial/ns16550.c      |  8 ++++++++
>  include/reset.h               |  2 +-
>  7 files changed, 37 insertions(+), 4 deletions(-)
>
> --
> 2.2.2
>

Regards,
Simon