[U-Boot] [PATCH v5 0/5] drivers: Add reset ctrl to drivers

[Ley Foon Tan]

On Sat, Jun 9, 2018 at 5:59 AM, Simon Glass <sjg at chromium.org> wrote:
> Hi Ley Foon,
>
> On 3 June 2018 at 23:19, Ley Foon Tan <ley.foon.tan at intel.com> wrote:
>> Add reset ctrl to dwmmc socfpga, designware Ethernet and ns16550 serial drivers.
>>
>> A reset property is an optional feature, so only print out a warning and
>> do not fail if a reset property is not present.
>>
>> If a reset property is discovered, then use it to deassert, thus bringing the
>> IP out of reset.
>>
>> v5 change:
>> - Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET
>> - Change to use CONFIG_IS_ENABLED(DM_RESET) in reset.h
>> - Added Simon's Reviewed-by in dwmmc, 16550 serial and designware emac patches.
>
> I think it is better to also include the earlier change logs, Also you
> should have a change log on each patch as well as the cover letter.
Okay, I can resend this.
>
> The patman tool does this for you, so I suggest you take a look at that.
>
>>
>> History:
>> v1: https://patchwork.ozlabs.org/cover/905519/
>> v2: https://patchwork.ozlabs.org/cover/908667/
>> v3: https://patchwork.ozlabs.org/cover/910018/
>> v4: https://patchwork.ozlabs.org/cover/923883/
>>
>> Ley Foon Tan (5):
>>   reset: Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET
>>   include: reset: Change to use CONFIG_IS_ENABLED(DM_RESET)
>>   mmc: dwmmc: socfpga: Add reset ctrl to driver
>>   serial: ns16550: Add reset ctrl to driver
>>   net: designware: Add reset ctrl to driver
>>
>>  arch/arm/mach-stm32mp/Kconfig |  2 +-
>>  common/spl/Kconfig            |  2 +-
>>  drivers/Makefile              |  2 +-
>>  drivers/mmc/socfpga_dw_mmc.c  | 17 +++++++++++++++++
>>  drivers/net/designware.c      |  8 ++++++++
>>  drivers/serial/ns16550.c      |  8 ++++++++
>>  include/reset.h               |  2 +-
>>  7 files changed, 37 insertions(+), 4 deletions(-)
>>
>> --
>> 2.2.2
>>
Regards
Ley Foon