[U-Boot] [PATCH 1/2] ARM: rmobile: Point load address to more sane area on Gen2

[Marek Vasut]

Point the $loadaddr variable and default load address to a more sane
area, 256 MiB from the start of RAM. While it is convenient to use
uImage without copying, which is why the previous load address was
set the way it was, uImage is now legacy. This behavior could still
be easily retained by "setenv loadaddr 0x40007fc0" . The new setup
allows us to use for example modern fitImage with kernel_noload, so
use this as a new preferred default.

Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
---
 include/configs/rcar-gen2-common.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h
index 231c4ecea4..e1b2fa28e1 100644
--- a/include/configs/rcar-gen2-common.h
+++ b/include/configs/rcar-gen2-common.h
@@ -33,7 +33,8 @@
 
 #define CONFIG_SYS_SDRAM_BASE		(RCAR_GEN2_SDRAM_BASE)
 #define CONFIG_SYS_SDRAM_SIZE		(RCAR_GEN2_UBOOT_SDRAM_SIZE)
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fc0)
+#define CONFIG_SYS_LOAD_ADDR		0x50000000
+#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
 #define CONFIG_NR_DRAM_BANKS		1
 
 #define CONFIG_SYS_MONITOR_BASE		0x00000000
-- 
2.16.2