[U-Boot] [PATCH 2/2] ARM: rmobile: Point load address to more sane area on Gen3

Marek Vasut marek.vasut at gmail.com
Sun Jun 10 14:33:24 UTC 2018


Point the $loadaddr variable and default load address to a more sane
area, 384 MiB from the start of RAM. This is to avoid all the reserved
memory at the beginning of RAM. The old behavior could still be easily
retained by "setenv loadaddr 0x48080000" . The new setup allows us to
use for example modern fitImage with kernel_noload, so use this as a
new preferred default.

Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
---
 include/configs/rcar-gen3-common.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h
index af7b196dc1..07f08db4fe 100644
--- a/include/configs/rcar-gen3-common.h
+++ b/include/configs/rcar-gen3-common.h
@@ -42,7 +42,8 @@
 #define CONFIG_NR_DRAM_BANKS		4
 #define CONFIG_SYS_SDRAM_BASE		(0x40000000 + DRAM_RSV_SIZE)
 #define CONFIG_SYS_SDRAM_SIZE		(0x80000000u - DRAM_RSV_SIZE)
-#define CONFIG_SYS_LOAD_ADDR		0x48080000
+#define CONFIG_SYS_LOAD_ADDR		0x58000000
+#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_MAX_MEM_MAPPED		(0x80000000u - DRAM_RSV_SIZE)
 
-- 
2.16.2



More information about the U-Boot mailing list