[U-Boot] [UBOOT PATCH v2 1/3] spi: xilinx: Read reg base address from DTS file

[Vipul Kumar]

From: Michal Simek <michal.simek at xilinx.com>

This patch added support to read register base address
from DTS file.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
Signed-off-by: Vipul Kumar <vipul.kumar at xilinx.com>
---
 drivers/spi/xilinx_spi.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 8f0f32f..615106b 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -77,10 +77,6 @@
 #define CONFIG_XILINX_SPI_IDLE_VAL     GENMASK(7, 0)
 #endif

-#ifndef CONFIG_SYS_XILINX_SPI_LIST
-#define CONFIG_SYS_XILINX_SPI_LIST     { CONFIG_SYS_SPI_BASE }
-#endif
-
 /* xilinx spi register set */
 struct xilinx_spi_regs {
        u32 __space0__[7];
@@ -105,16 +101,14 @@ struct xilinx_spi_priv {
        struct xilinx_spi_regs *regs;
        unsigned int freq;
        unsigned int mode;
+       unsigned int fifo_depth;
 };

-static unsigned long xilinx_spi_base_list[] = CONFIG_SYS_XILINX_SPI_LIST;
 static int xilinx_spi_probe(struct udevice *bus)
 {
        struct xilinx_spi_priv *priv = dev_get_priv(bus);
        struct xilinx_spi_regs *regs = priv->regs;

-       priv->regs = (struct xilinx_spi_regs *)xilinx_spi_base_list[bus->seq];
-
        writel(SPISSR_RESET_VALUE, &regs->srr);

        return 0;
@@ -285,6 +279,21 @@ static const struct dm_spi_ops xilinx_spi_ops = {
        .set_mode       = xilinx_spi_set_mode,
 };

+static int xilinx_spi_ofdata_to_platdata(struct udevice *bus)
+{
+       struct xilinx_spi_priv *priv = dev_get_priv(bus);
+       struct udevice *dev = dev_get_parent(bus);
+
+       priv->regs = (struct xilinx_spi_regs *)devfdt_get_addr(bus);
+
+       debug("%s: regs=%p\n", __func__, priv->regs);
+
+       priv->fifo_depth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(bus),
+                                         "fifo-size", 0);
+
+       return 0;
+}
+
 static const struct udevice_id xilinx_spi_ids[] = {
        { .compatible = "xlnx,xps-spi-2.00.a" },
        { .compatible = "xlnx,xps-spi-2.00.b" },
@@ -296,6 +305,7 @@ U_BOOT_DRIVER(xilinx_spi) = {
        .id     = UCLASS_SPI,
        .of_match = xilinx_spi_ids,
        .ops    = &xilinx_spi_ops,
+       .ofdata_to_platdata = xilinx_spi_ofdata_to_platdata,
        .priv_auto_alloc_size = sizeof(struct xilinx_spi_priv),
        .probe  = xilinx_spi_probe,
 };
--
2.7.4

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.