[U-Boot] [PATCH v2 8/9] arm: dts: imx7: sync with Linux
Stefan Agner
stefan at agner.ch
Fri Jun 22 16:06:19 UTC 2018
From: Stefan Agner <stefan.agner at toradex.com>
Sync with Linux commit 60cc43fc8884 ("Linux 4.17-rc1").
Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
---
Changes in v2: None
arch/arm/dts/imx7s.dtsi | 491 +++++++++++++++---------
include/dt-bindings/clock/imx7d-clock.h | 15 +-
include/dt-bindings/power/imx7-power.h | 16 +
3 files changed, 341 insertions(+), 181 deletions(-)
create mode 100644 include/dt-bindings/power/imx7-power.h
diff --git a/arch/arm/dts/imx7s.dtsi b/arch/arm/dts/imx7s.dtsi
index a7d48e785d..4d42335c0d 100644
--- a/arch/arm/dts/imx7s.dtsi
+++ b/arch/arm/dts/imx7s.dtsi
@@ -42,6 +42,7 @@
*/
#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/power/imx7-power.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -57,7 +58,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; reg = <0 0>; };
+ memory { device_type = "memory"; };
aliases {
gpio0 = &gpio1;
@@ -115,11 +116,77 @@
clock-output-names = "osc";
};
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY1_CLK>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
+ };
+
+ usbphynop3: usbphynop3 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupt-parent = <&gpc>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>;
+ };
+
+ replicator {
+ /*
+ * non-configurable replicators don't show up on the
+ * AMBA bus. As such no need to add "arm,primecell"
+ */
+ compatible = "arm,coresight-replicator";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* replicator output ports */
+ port at 0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etr_in_port>;
+ };
+ };
+
+ /* replicator input port */
+ port at 2 {
+ reg = <0>;
+ replicator_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etf_out_port>;
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- interrupt-parent = <&intc>;
+ interrupt-parent = <&gpc>;
ranges;
funnel at 30041000 {
@@ -259,62 +326,18 @@
};
};
- replicator {
- /*
- * non-configurable replicators don't show up on the
- * AMBA bus. As such no need to add "arm,primecell"
- */
- compatible = "arm,coresight-replicator";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* replicator output ports */
- port at 0 {
- reg = <0>;
- replicator_out_port0: endpoint {
- remote-endpoint = <&tpiu_in_port>;
- };
- };
-
- port at 1 {
- reg = <1>;
- replicator_out_port1: endpoint {
- remote-endpoint = <&etr_in_port>;
- };
- };
-
- /* replicator input port */
- port at 2 {
- reg = <0>;
- replicator_in_port0: endpoint {
- slave-mode;
- remote-endpoint = <&etf_out_port>;
- };
- };
- };
- };
-
intc: interrupt-controller at 31001000 {
compatible = "arm,cortex-a7-gic";
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
interrupt-controller;
+ interrupt-parent = <&intc>;
reg = <0x31001000 0x1000>,
<0x31002000 0x2000>,
<0x31004000 0x2000>,
<0x31006000 0x2000>;
};
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
aips1: aips-bus at 30000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
@@ -482,20 +505,49 @@
status = "disabled";
};
+ kpp: kpp at 30320000 {
+ compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
+ reg = <0x30320000 0x10000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_KPP_ROOT_CLK>;
+ status = "disabled";
+ };
+
iomuxc: iomuxc at 30330000 {
compatible = "fsl,imx7d-iomuxc";
reg = <0x30330000 0x10000>;
};
gpr: iomuxc-gpr at 30340000 {
- compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
+ compatible = "fsl,imx7d-iomuxc-gpr",
+ "fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x30340000 0x10000>;
};
ocotp: ocotp-ctrl at 30350000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,imx7d-ocotp", "syscon";
reg = <0x30350000 0x10000>;
clocks = <&clks IMX7D_OCOTP_CLK>;
+
+ tempmon_calib: calib at 3c {
+ reg = <0x3c 0x4>;
+ };
+
+ tempmon_temp_grade: temp-grade at 10 {
+ reg = <0x10 0x4>;
+ };
+ };
+
+ tempmon: tempmon {
+ compatible = "fsl,imx7d-tempmon";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon =<&anatop>;
+ nvmem-cells = <&tempmon_calib>,
+ <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
};
anatop: anatop at 30360000 {
@@ -504,8 +556,11 @@
reg = <0x30360000 0x10000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_1p0d: regulator-vdd1p0d {
+ reg_1p0d: regulator-vdd1p0d at 30360210 {
+ reg = <0x30360210>;
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p0d";
regulator-min-microvolt = <800000>;
@@ -516,6 +571,7 @@
anatop-min-bit-val = <8>;
anatop-min-voltage = <800000>;
anatop-max-voltage = <1200000>;
+ anatop-enable-bit = <0>;
};
};
@@ -529,12 +585,15 @@
offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_SNVS_CLK>;
+ clock-names = "snvs-rtc";
};
snvs_poweroff: snvs-poweroff {
compatible = "syscon-poweroff";
regmap = <&snvs>;
offset = <0x38>;
+ value = <0x60>;
mask = <0x60>;
};
@@ -558,11 +617,32 @@
};
src: src at 30390000 {
- compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
+ compatible = "fsl,imx7d-src", "syscon";
reg = <0x30390000 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
+
+ gpc: gpc at 303a0000 {
+ compatible = "fsl,imx7d-gpc";
+ reg = <0x303a0000 0x10000>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&intc>;
+ #power-domain-cells = <1>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pgc_pcie_phy: pgc-power-domain at 1 {
+ #power-domain-cells = <0>;
+ reg = <1>;
+ power-supply = <®_1p0d>;
+ };
+ };
+ };
};
aips2: aips-bus at 30400000 {
@@ -609,7 +689,7 @@
clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
<&clks IMX7D_PWM1_ROOT_CLK>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -620,7 +700,7 @@
clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
<&clks IMX7D_PWM2_ROOT_CLK>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -631,7 +711,7 @@
clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
<&clks IMX7D_PWM3_ROOT_CLK>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -642,7 +722,7 @@
clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
<&clks IMX7D_PWM4_ROOT_CLK>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -664,118 +744,156 @@
reg = <0x30800000 0x400000>;
ranges;
- ecspi1: ecspi at 30820000 {
+ spba-bus at 30800000 {
+ compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
- reg = <0x30820000 0x10000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
- <&clks IMX7D_ECSPI1_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
+ #size-cells = <1>;
+ reg = <0x30800000 0x100000>;
+ ranges;
+
+ ecspi1: ecspi at 30820000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30820000 0x10000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
+ <&clks IMX7D_ECSPI1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
- ecspi2: ecspi at 30830000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
- reg = <0x30830000 0x10000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
- <&clks IMX7D_ECSPI2_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
+ ecspi2: ecspi at 30830000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30830000 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
+ <&clks IMX7D_ECSPI2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
- ecspi3: ecspi at 30840000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
- reg = <0x30840000 0x10000>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
- <&clks IMX7D_ECSPI3_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
+ ecspi3: ecspi at 30840000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30840000 0x10000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
+ <&clks IMX7D_ECSPI3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
- uart1: serial at 30860000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30860000 0x10000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_UART1_ROOT_CLK>,
- <&clks IMX7D_UART1_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
+ uart1: serial at 30860000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30860000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+ <&clks IMX7D_UART1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
- uart2: serial at 30890000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30890000 0x10000>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_UART2_ROOT_CLK>,
- <&clks IMX7D_UART2_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
+ uart2: serial at 30890000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30890000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+ <&clks IMX7D_UART2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
- uart3: serial at 30880000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30880000 0x10000>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_UART3_ROOT_CLK>,
- <&clks IMX7D_UART3_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
+ uart3: serial at 30880000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30880000 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+ <&clks IMX7D_UART3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
- sai1: sai at 308a0000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
- reg = <0x308a0000 0x10000>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_SAI1_IPG_CLK>,
- <&clks IMX7D_SAI1_ROOT_CLK>,
- <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dma-names = "rx", "tx";
- dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
- status = "disabled";
- };
+ sai1: sai at 308a0000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+ reg = <0x308a0000 0x10000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_SAI1_IPG_CLK>,
+ <&clks IMX7D_SAI1_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
+ status = "disabled";
+ };
- sai2: sai at 308b0000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
- reg = <0x308b0000 0x10000>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_SAI2_IPG_CLK>,
- <&clks IMX7D_SAI2_ROOT_CLK>,
- <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dma-names = "rx", "tx";
- dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
- status = "disabled";
+ sai2: sai at 308b0000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+ reg = <0x308b0000 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_SAI2_IPG_CLK>,
+ <&clks IMX7D_SAI2_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
+ status = "disabled";
+ };
+
+ sai3: sai at 308c0000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+ reg = <0x308c0000 0x10000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_SAI3_IPG_CLK>,
+ <&clks IMX7D_SAI3_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
+ status = "disabled";
+ };
};
- sai3: sai at 308c0000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
- reg = <0x308c0000 0x10000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_SAI3_IPG_CLK>,
- <&clks IMX7D_SAI3_ROOT_CLK>,
- <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dma-names = "rx", "tx";
- dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
- status = "disabled";
+ crypto: caam at 30900000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30900000 0x40000>;
+ ranges = <0 0x30900000 0x40000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CAAM_CLK>,
+ <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+ clock-names = "ipg", "aclk";
+
+ sec_jr0: jr0 at 1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr1 at 2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr1 at 3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
flexcan1: can at 30a00000 {
@@ -918,24 +1036,12 @@
reg = <0x30b30200 0x200>;
};
- usbphynop1: usbphynop1 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks IMX7D_USB_PHY1_CLK>;
- clock-names = "main_clk";
- };
-
- usbphynop3: usbphynop3 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
- clock-names = "main_clk";
- };
-
usdhc1: usdhc at 30b40000 {
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_CLK_DUMMY>,
+ clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+ <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
<&clks IMX7D_USDHC1_ROOT_CLK>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@@ -946,8 +1052,8 @@
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_CLK_DUMMY>,
+ clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+ <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
<&clks IMX7D_USDHC2_ROOT_CLK>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@@ -958,8 +1064,8 @@
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
reg = <0x30b60000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_CLK_DUMMY>,
+ clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+ <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
<&clks IMX7D_USDHC3_ROOT_CLK>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@@ -980,9 +1086,11 @@
fec1: ethernet at 30be0000 {
compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
reg = <0x30be0000 0x10000>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ interrupt-names = "int0", "int1", "int2", "pps";
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
<&clks IMX7D_ENET_AXI_ROOT_CLK>,
<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
@@ -995,5 +1103,36 @@
status = "disabled";
};
};
+
+ dma_apbh: dma-apbh at 33000000 {
+ compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+ reg = <0x33000000 0x2000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+ #dma-cells = <1>;
+ dma-channels = <4>;
+ clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
+ };
+
+ gpmi: gpmi-nand at 33002000{
+ compatible = "fsl,imx7d-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "bch";
+ clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
+ <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
+ clock-names = "gpmi_io", "gpmi_bch_apb";
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
+ };
};
};
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index a7a1a50f33..b2325d3e23 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -80,10 +80,10 @@
#define IMX7D_ARM_M4_ROOT_SRC 67
#define IMX7D_ARM_M4_ROOT_CG 68
#define IMX7D_ARM_M4_ROOT_DIV 69
-#define IMX7D_ARM_M0_ROOT_CLK 70
-#define IMX7D_ARM_M0_ROOT_SRC 71
-#define IMX7D_ARM_M0_ROOT_CG 72
-#define IMX7D_ARM_M0_ROOT_DIV 73
+#define IMX7D_ARM_M0_ROOT_CLK 70 /* unused */
+#define IMX7D_ARM_M0_ROOT_SRC 71 /* unused */
+#define IMX7D_ARM_M0_ROOT_CG 72 /* unused */
+#define IMX7D_ARM_M0_ROOT_DIV 73 /* unused */
#define IMX7D_MAIN_AXI_ROOT_CLK 74
#define IMX7D_MAIN_AXI_ROOT_SRC 75
#define IMX7D_MAIN_AXI_ROOT_CG 76
@@ -450,5 +450,10 @@
#define IMX7D_CLK_ARM 437
#define IMX7D_CKIL 438
#define IMX7D_OCOTP_CLK 439
-#define IMX7D_CLK_END 440
+#define IMX7D_NAND_RAWNAND_CLK 440
+#define IMX7D_NAND_USDHC_BUS_RAWNAND_CLK 441
+#define IMX7D_SNVS_CLK 442
+#define IMX7D_CAAM_CLK 443
+#define IMX7D_KPP_ROOT_CLK 444
+#define IMX7D_CLK_END 445
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
diff --git a/include/dt-bindings/power/imx7-power.h b/include/dt-bindings/power/imx7-power.h
new file mode 100644
index 0000000000..3a181e4105
--- /dev/null
+++ b/include/dt-bindings/power/imx7-power.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2017 Impinj
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DT_BINDINGS_IMX7_POWER_H__
+#define __DT_BINDINGS_IMX7_POWER_H__
+
+#define IMX7_POWER_DOMAIN_MIPI_PHY 0
+#define IMX7_POWER_DOMAIN_PCIE_PHY 1
+#define IMX7_POWER_DOMAIN_USB_HSIC_PHY 2
+
+#endif
--
2.17.1
More information about the U-Boot
mailing list